Development of a laser-guided deep-hole evaluating probe: For 100 to 600 mm diameter hole

Akio Katsuki, Hiromichi Onikura, Takao Sajima, Hyun Koo Park, Takahiro Nakanishi, Takahiro Ookubo, Hiroshi Murakami, Nobuhiro Okada, Mamoru Arita, Masaru Mitsunaga

Research output: Contribution to conferencePaper

3 Citations (Scopus)

Abstract

A probe is designed and fabricated that can measure the diameter, roundness, cylindricity and straightness of deep holes with 100 to 600 mm diameter. To improve detection accuracy, CCD cameras are used to detect the probe position and inclination instead of the position-sensitive detectors used in earlier probes. Measurements are made by precisely feeding a workpiece over the probe using a servomotor. The measurements show that the probe can measure the diameter, roundness, cylindricity and straightness of a deep hole with one scan, with good correlation with measurement made by alternative reliable measuring devices.

Original languageEnglish
Publication statusPublished - Dec 1 2007
Event4th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2007 - Fukuoka, Japan
Duration: Nov 7 2007Nov 9 2007

Other

Other4th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2007
CountryJapan
CityFukuoka
Period11/7/0711/9/07

Fingerprint

Lasers
Servomotors
CCD cameras
Detectors

All Science Journal Classification (ASJC) codes

  • Industrial and Manufacturing Engineering

Cite this

Katsuki, A., Onikura, H., Sajima, T., Park, H. K., Nakanishi, T., Ookubo, T., ... Mitsunaga, M. (2007). Development of a laser-guided deep-hole evaluating probe: For 100 to 600 mm diameter hole. Paper presented at 4th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2007, Fukuoka, Japan.

Development of a laser-guided deep-hole evaluating probe : For 100 to 600 mm diameter hole. / Katsuki, Akio; Onikura, Hiromichi; Sajima, Takao; Park, Hyun Koo; Nakanishi, Takahiro; Ookubo, Takahiro; Murakami, Hiroshi; Okada, Nobuhiro; Arita, Mamoru; Mitsunaga, Masaru.

2007. Paper presented at 4th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2007, Fukuoka, Japan.

Research output: Contribution to conferencePaper

Katsuki, A, Onikura, H, Sajima, T, Park, HK, Nakanishi, T, Ookubo, T, Murakami, H, Okada, N, Arita, M & Mitsunaga, M 2007, 'Development of a laser-guided deep-hole evaluating probe: For 100 to 600 mm diameter hole' Paper presented at 4th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2007, Fukuoka, Japan, 11/7/07 - 11/9/07, .
Katsuki A, Onikura H, Sajima T, Park HK, Nakanishi T, Ookubo T et al. Development of a laser-guided deep-hole evaluating probe: For 100 to 600 mm diameter hole. 2007. Paper presented at 4th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2007, Fukuoka, Japan.
Katsuki, Akio ; Onikura, Hiromichi ; Sajima, Takao ; Park, Hyun Koo ; Nakanishi, Takahiro ; Ookubo, Takahiro ; Murakami, Hiroshi ; Okada, Nobuhiro ; Arita, Mamoru ; Mitsunaga, Masaru. / Development of a laser-guided deep-hole evaluating probe : For 100 to 600 mm diameter hole. Paper presented at 4th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2007, Fukuoka, Japan.
@conference{9896628cfbde454fbffa846618f30996,
title = "Development of a laser-guided deep-hole evaluating probe: For 100 to 600 mm diameter hole",
abstract = "A probe is designed and fabricated that can measure the diameter, roundness, cylindricity and straightness of deep holes with 100 to 600 mm diameter. To improve detection accuracy, CCD cameras are used to detect the probe position and inclination instead of the position-sensitive detectors used in earlier probes. Measurements are made by precisely feeding a workpiece over the probe using a servomotor. The measurements show that the probe can measure the diameter, roundness, cylindricity and straightness of a deep hole with one scan, with good correlation with measurement made by alternative reliable measuring devices.",
author = "Akio Katsuki and Hiromichi Onikura and Takao Sajima and Park, {Hyun Koo} and Takahiro Nakanishi and Takahiro Ookubo and Hiroshi Murakami and Nobuhiro Okada and Mamoru Arita and Masaru Mitsunaga",
year = "2007",
month = "12",
day = "1",
language = "English",
note = "4th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2007 ; Conference date: 07-11-2007 Through 09-11-2007",

}

TY - CONF

T1 - Development of a laser-guided deep-hole evaluating probe

T2 - For 100 to 600 mm diameter hole

AU - Katsuki, Akio

AU - Onikura, Hiromichi

AU - Sajima, Takao

AU - Park, Hyun Koo

AU - Nakanishi, Takahiro

AU - Ookubo, Takahiro

AU - Murakami, Hiroshi

AU - Okada, Nobuhiro

AU - Arita, Mamoru

AU - Mitsunaga, Masaru

PY - 2007/12/1

Y1 - 2007/12/1

N2 - A probe is designed and fabricated that can measure the diameter, roundness, cylindricity and straightness of deep holes with 100 to 600 mm diameter. To improve detection accuracy, CCD cameras are used to detect the probe position and inclination instead of the position-sensitive detectors used in earlier probes. Measurements are made by precisely feeding a workpiece over the probe using a servomotor. The measurements show that the probe can measure the diameter, roundness, cylindricity and straightness of a deep hole with one scan, with good correlation with measurement made by alternative reliable measuring devices.

AB - A probe is designed and fabricated that can measure the diameter, roundness, cylindricity and straightness of deep holes with 100 to 600 mm diameter. To improve detection accuracy, CCD cameras are used to detect the probe position and inclination instead of the position-sensitive detectors used in earlier probes. Measurements are made by precisely feeding a workpiece over the probe using a servomotor. The measurements show that the probe can measure the diameter, roundness, cylindricity and straightness of a deep hole with one scan, with good correlation with measurement made by alternative reliable measuring devices.

UR - http://www.scopus.com/inward/record.url?scp=84883385768&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84883385768&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:84883385768

ER -