Development of backfilling injection into over-cutting area including lubricant behavior for pipe jacking in deep strata

Hideki Shimada, Yasutaka Maeda, Takashi Senda, Takashi Sasaoka, Shuichi Fujita, Kikuo Matsui, Yasuhiro Yoshida, Dai Watanabe

Research output: Contribution to conferencePaper

Abstract

In Japan when urban infrastructures need to be constructed, the difficulty of utilizing the ground or shallow strata will necessarily lead to the more frequent use of the deep strata. The common construction methods are open-cut, pipe jacking, and shield methods. In recent years a new pipe jacking method has been established that can be adapted to 20 m below the ground or more. Using the method, the drivage machine and the jacking pipe continue to move an underground until the completion of the driving. Therefore an over-cutting area (so-called tailvoid) must be formed to lower the friction between the ground and the pipe. The over-cutting area is filled with lubrications. However, because the stress release of the ground continues to advance when the over-cutting area is formed, there are some challenges required to cope with the stability of the surrounding ground. In order to utilize the pipe jacking method in the deeper strata layers, the theory, analysis and installation of over-cutting area have to be systemized, and such systematic data must be stored. Therefore, the conditions of over-cutting area in the deep pipe jacking method are discussed using numerical analyses. Moreover, a lubricating material comprised of a mixture of surfactant and fly ash was developed for the application of pipe jacking in deep strata.

Original languageEnglish
Publication statusPublished - Jan 1 2013
Event31st ISTT International No-Dig Downunder - Sydney, Australia
Duration: Sep 1 2013Sep 4 2013

Other

Other31st ISTT International No-Dig Downunder
CountryAustralia
CitySydney
Period9/1/139/4/13

Fingerprint

pipe jacking
lubricant
strata
lubricants
Lubricants
Pipe
injection
construction method
fly ash
bedrock
ashes
lubrication
surfactant
cutting (process)
shield
Fly ash
friction
pipe
Lubrication
installing

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering
  • Geotechnical Engineering and Engineering Geology
  • Civil and Structural Engineering
  • Building and Construction
  • Geology
  • Geophysics

Cite this

Shimada, H., Maeda, Y., Senda, T., Sasaoka, T., Fujita, S., Matsui, K., ... Watanabe, D. (2013). Development of backfilling injection into over-cutting area including lubricant behavior for pipe jacking in deep strata. Paper presented at 31st ISTT International No-Dig Downunder, Sydney, Australia.

Development of backfilling injection into over-cutting area including lubricant behavior for pipe jacking in deep strata. / Shimada, Hideki; Maeda, Yasutaka; Senda, Takashi; Sasaoka, Takashi; Fujita, Shuichi; Matsui, Kikuo; Yoshida, Yasuhiro; Watanabe, Dai.

2013. Paper presented at 31st ISTT International No-Dig Downunder, Sydney, Australia.

Research output: Contribution to conferencePaper

Shimada, H, Maeda, Y, Senda, T, Sasaoka, T, Fujita, S, Matsui, K, Yoshida, Y & Watanabe, D 2013, 'Development of backfilling injection into over-cutting area including lubricant behavior for pipe jacking in deep strata' Paper presented at 31st ISTT International No-Dig Downunder, Sydney, Australia, 9/1/13 - 9/4/13, .
Shimada H, Maeda Y, Senda T, Sasaoka T, Fujita S, Matsui K et al. Development of backfilling injection into over-cutting area including lubricant behavior for pipe jacking in deep strata. 2013. Paper presented at 31st ISTT International No-Dig Downunder, Sydney, Australia.
Shimada, Hideki ; Maeda, Yasutaka ; Senda, Takashi ; Sasaoka, Takashi ; Fujita, Shuichi ; Matsui, Kikuo ; Yoshida, Yasuhiro ; Watanabe, Dai. / Development of backfilling injection into over-cutting area including lubricant behavior for pipe jacking in deep strata. Paper presented at 31st ISTT International No-Dig Downunder, Sydney, Australia.
@conference{3bd9ce81ab1348f1b9b52a631d4b1893,
title = "Development of backfilling injection into over-cutting area including lubricant behavior for pipe jacking in deep strata",
abstract = "In Japan when urban infrastructures need to be constructed, the difficulty of utilizing the ground or shallow strata will necessarily lead to the more frequent use of the deep strata. The common construction methods are open-cut, pipe jacking, and shield methods. In recent years a new pipe jacking method has been established that can be adapted to 20 m below the ground or more. Using the method, the drivage machine and the jacking pipe continue to move an underground until the completion of the driving. Therefore an over-cutting area (so-called tailvoid) must be formed to lower the friction between the ground and the pipe. The over-cutting area is filled with lubrications. However, because the stress release of the ground continues to advance when the over-cutting area is formed, there are some challenges required to cope with the stability of the surrounding ground. In order to utilize the pipe jacking method in the deeper strata layers, the theory, analysis and installation of over-cutting area have to be systemized, and such systematic data must be stored. Therefore, the conditions of over-cutting area in the deep pipe jacking method are discussed using numerical analyses. Moreover, a lubricating material comprised of a mixture of surfactant and fly ash was developed for the application of pipe jacking in deep strata.",
author = "Hideki Shimada and Yasutaka Maeda and Takashi Senda and Takashi Sasaoka and Shuichi Fujita and Kikuo Matsui and Yasuhiro Yoshida and Dai Watanabe",
year = "2013",
month = "1",
day = "1",
language = "English",
note = "31st ISTT International No-Dig Downunder ; Conference date: 01-09-2013 Through 04-09-2013",

}

TY - CONF

T1 - Development of backfilling injection into over-cutting area including lubricant behavior for pipe jacking in deep strata

AU - Shimada, Hideki

AU - Maeda, Yasutaka

AU - Senda, Takashi

AU - Sasaoka, Takashi

AU - Fujita, Shuichi

AU - Matsui, Kikuo

AU - Yoshida, Yasuhiro

AU - Watanabe, Dai

PY - 2013/1/1

Y1 - 2013/1/1

N2 - In Japan when urban infrastructures need to be constructed, the difficulty of utilizing the ground or shallow strata will necessarily lead to the more frequent use of the deep strata. The common construction methods are open-cut, pipe jacking, and shield methods. In recent years a new pipe jacking method has been established that can be adapted to 20 m below the ground or more. Using the method, the drivage machine and the jacking pipe continue to move an underground until the completion of the driving. Therefore an over-cutting area (so-called tailvoid) must be formed to lower the friction between the ground and the pipe. The over-cutting area is filled with lubrications. However, because the stress release of the ground continues to advance when the over-cutting area is formed, there are some challenges required to cope with the stability of the surrounding ground. In order to utilize the pipe jacking method in the deeper strata layers, the theory, analysis and installation of over-cutting area have to be systemized, and such systematic data must be stored. Therefore, the conditions of over-cutting area in the deep pipe jacking method are discussed using numerical analyses. Moreover, a lubricating material comprised of a mixture of surfactant and fly ash was developed for the application of pipe jacking in deep strata.

AB - In Japan when urban infrastructures need to be constructed, the difficulty of utilizing the ground or shallow strata will necessarily lead to the more frequent use of the deep strata. The common construction methods are open-cut, pipe jacking, and shield methods. In recent years a new pipe jacking method has been established that can be adapted to 20 m below the ground or more. Using the method, the drivage machine and the jacking pipe continue to move an underground until the completion of the driving. Therefore an over-cutting area (so-called tailvoid) must be formed to lower the friction between the ground and the pipe. The over-cutting area is filled with lubrications. However, because the stress release of the ground continues to advance when the over-cutting area is formed, there are some challenges required to cope with the stability of the surrounding ground. In order to utilize the pipe jacking method in the deeper strata layers, the theory, analysis and installation of over-cutting area have to be systemized, and such systematic data must be stored. Therefore, the conditions of over-cutting area in the deep pipe jacking method are discussed using numerical analyses. Moreover, a lubricating material comprised of a mixture of surfactant and fly ash was developed for the application of pipe jacking in deep strata.

UR - http://www.scopus.com/inward/record.url?scp=84924387878&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84924387878&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:84924387878

ER -