Development of disk fin type compact current leads

K. Ishibashi, E. Murakami, K. Maehata, A. Katase, M. Wake

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

Compact current leads have been developed for a superconducting thin solenoid magnet at KEK. A disk fin of a special type (straight-cut disk fin) is devised which is suited to be cut straight with numerically controlled machines such as a wire cutter or a milling machine. Since the straight-cut disk fins increase both the heat exchange efficiency and the thermal inertia of current-carrying conductor, they enable us to construct the current lead compactly. The length of the current lead fabricated is as short as 60 cm for its operating current of 4.1 kA. Good results have been achieved experimentally on the heat leakage into the cold region and on the pressure drop of cooling gas. The reliability of this current lead is estimated to be equivalent to that of the current lead twice in length without the cooling fin.

Original languageEnglish
Pages (from-to)560-565
Number of pages6
JournalCryogenics
Volume26
Issue number10
DOIs
Publication statusPublished - Oct 1986

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Physics and Astronomy(all)

Fingerprint Dive into the research topics of 'Development of disk fin type compact current leads'. Together they form a unique fingerprint.

  • Cite this

    Ishibashi, K., Murakami, E., Maehata, K., Katase, A., & Wake, M. (1986). Development of disk fin type compact current leads. Cryogenics, 26(10), 560-565. https://doi.org/10.1016/0011-2275(86)90117-7