Development of mechanical actuator for deep-hole measurement system

Md Hazrat Ali, Akio Katsuki, Takao Sajima, Hiroshi Murakami, Syuhei Kurokawa

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

This paper presents a new type of mechanical actuator which is used to help in measuring deep holes that carry up to a load of 26kg during measurement. Often the measurement probe's attitude is misaligned due to acting force on it. Actuator prevents or controls the misalignment of such probe during measurement. In this research, the complete measurement system consists of a servo motor, a laser diode, a laser interferometer, an optical system as well as the integrated computer system. The main purpose of this research is to develop the new type of actuator which can control the attitude (position and inclination) of a measurement probe. The experimental results show that it is possible to carry mechanically the loads up to 26kg of the measurement probe during measurement of deep-holes. In this paper, the developed actuator's mechanical function and its performance have been discussed with the experimental results.

Original languageEnglish
Title of host publicationTrends in Intelligent Robotics, Automation, and Manufacturing - First International Conference, IRAM 2012, Proceedings
Pages280-287
Number of pages8
Volume330 CCIS
DOIs
Publication statusPublished - 2012
Event1st International Conference on Intelligent Robotics, Automation and Manufacturing, IRAM 2012 - Kuala Lumpur, Malaysia
Duration: Nov 28 2012Nov 30 2012

Publication series

NameCommunications in Computer and Information Science
Volume330 CCIS
ISSN (Print)18650929

Other

Other1st International Conference on Intelligent Robotics, Automation and Manufacturing, IRAM 2012
CountryMalaysia
CityKuala Lumpur
Period11/28/1211/30/12

Fingerprint

Mechanical actuators
Actuators
Optical systems
Interferometers
Semiconductor lasers
Computer systems
Lasers

All Science Journal Classification (ASJC) codes

  • Computer Science(all)

Cite this

Ali, M. H., Katsuki, A., Sajima, T., Murakami, H., & Kurokawa, S. (2012). Development of mechanical actuator for deep-hole measurement system. In Trends in Intelligent Robotics, Automation, and Manufacturing - First International Conference, IRAM 2012, Proceedings (Vol. 330 CCIS, pp. 280-287). (Communications in Computer and Information Science; Vol. 330 CCIS). https://doi.org/10.1007/978-3-642-35197-6_31

Development of mechanical actuator for deep-hole measurement system. / Ali, Md Hazrat; Katsuki, Akio; Sajima, Takao; Murakami, Hiroshi; Kurokawa, Syuhei.

Trends in Intelligent Robotics, Automation, and Manufacturing - First International Conference, IRAM 2012, Proceedings. Vol. 330 CCIS 2012. p. 280-287 (Communications in Computer and Information Science; Vol. 330 CCIS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ali, MH, Katsuki, A, Sajima, T, Murakami, H & Kurokawa, S 2012, Development of mechanical actuator for deep-hole measurement system. in Trends in Intelligent Robotics, Automation, and Manufacturing - First International Conference, IRAM 2012, Proceedings. vol. 330 CCIS, Communications in Computer and Information Science, vol. 330 CCIS, pp. 280-287, 1st International Conference on Intelligent Robotics, Automation and Manufacturing, IRAM 2012, Kuala Lumpur, Malaysia, 11/28/12. https://doi.org/10.1007/978-3-642-35197-6_31
Ali MH, Katsuki A, Sajima T, Murakami H, Kurokawa S. Development of mechanical actuator for deep-hole measurement system. In Trends in Intelligent Robotics, Automation, and Manufacturing - First International Conference, IRAM 2012, Proceedings. Vol. 330 CCIS. 2012. p. 280-287. (Communications in Computer and Information Science). https://doi.org/10.1007/978-3-642-35197-6_31
Ali, Md Hazrat ; Katsuki, Akio ; Sajima, Takao ; Murakami, Hiroshi ; Kurokawa, Syuhei. / Development of mechanical actuator for deep-hole measurement system. Trends in Intelligent Robotics, Automation, and Manufacturing - First International Conference, IRAM 2012, Proceedings. Vol. 330 CCIS 2012. pp. 280-287 (Communications in Computer and Information Science).
@inproceedings{226242b60e0847f7a8aeabdf2d0ca03f,
title = "Development of mechanical actuator for deep-hole measurement system",
abstract = "This paper presents a new type of mechanical actuator which is used to help in measuring deep holes that carry up to a load of 26kg during measurement. Often the measurement probe's attitude is misaligned due to acting force on it. Actuator prevents or controls the misalignment of such probe during measurement. In this research, the complete measurement system consists of a servo motor, a laser diode, a laser interferometer, an optical system as well as the integrated computer system. The main purpose of this research is to develop the new type of actuator which can control the attitude (position and inclination) of a measurement probe. The experimental results show that it is possible to carry mechanically the loads up to 26kg of the measurement probe during measurement of deep-holes. In this paper, the developed actuator's mechanical function and its performance have been discussed with the experimental results.",
author = "Ali, {Md Hazrat} and Akio Katsuki and Takao Sajima and Hiroshi Murakami and Syuhei Kurokawa",
year = "2012",
doi = "10.1007/978-3-642-35197-6_31",
language = "English",
isbn = "9783642351969",
volume = "330 CCIS",
series = "Communications in Computer and Information Science",
pages = "280--287",
booktitle = "Trends in Intelligent Robotics, Automation, and Manufacturing - First International Conference, IRAM 2012, Proceedings",

}

TY - GEN

T1 - Development of mechanical actuator for deep-hole measurement system

AU - Ali, Md Hazrat

AU - Katsuki, Akio

AU - Sajima, Takao

AU - Murakami, Hiroshi

AU - Kurokawa, Syuhei

PY - 2012

Y1 - 2012

N2 - This paper presents a new type of mechanical actuator which is used to help in measuring deep holes that carry up to a load of 26kg during measurement. Often the measurement probe's attitude is misaligned due to acting force on it. Actuator prevents or controls the misalignment of such probe during measurement. In this research, the complete measurement system consists of a servo motor, a laser diode, a laser interferometer, an optical system as well as the integrated computer system. The main purpose of this research is to develop the new type of actuator which can control the attitude (position and inclination) of a measurement probe. The experimental results show that it is possible to carry mechanically the loads up to 26kg of the measurement probe during measurement of deep-holes. In this paper, the developed actuator's mechanical function and its performance have been discussed with the experimental results.

AB - This paper presents a new type of mechanical actuator which is used to help in measuring deep holes that carry up to a load of 26kg during measurement. Often the measurement probe's attitude is misaligned due to acting force on it. Actuator prevents or controls the misalignment of such probe during measurement. In this research, the complete measurement system consists of a servo motor, a laser diode, a laser interferometer, an optical system as well as the integrated computer system. The main purpose of this research is to develop the new type of actuator which can control the attitude (position and inclination) of a measurement probe. The experimental results show that it is possible to carry mechanically the loads up to 26kg of the measurement probe during measurement of deep-holes. In this paper, the developed actuator's mechanical function and its performance have been discussed with the experimental results.

UR - http://www.scopus.com/inward/record.url?scp=84870810311&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84870810311&partnerID=8YFLogxK

U2 - 10.1007/978-3-642-35197-6_31

DO - 10.1007/978-3-642-35197-6_31

M3 - Conference contribution

SN - 9783642351969

VL - 330 CCIS

T3 - Communications in Computer and Information Science

SP - 280

EP - 287

BT - Trends in Intelligent Robotics, Automation, and Manufacturing - First International Conference, IRAM 2012, Proceedings

ER -