TY - GEN
T1 - Development of micro energy harvest circuit using RF signal
AU - Nakashima, Ataru
AU - Mansour, Mohamed M.
AU - Hatanaka, Shunsuke
AU - Takiguchi, Osamu
AU - Kanaya, Haruichi
N1 - Funding Information:
This work was partly supported by VLSI Design and Education Center (VTEC), the University of Tokyo in collaboration with CADENCE Corporation and Keysight Technologies. This work was also partially supported by the Grant-in-Aid for Scientific Research (18K04146) from the Japan Society for the Promotion of Science (JSPS) and Strategic Information and Communications R&D Promotion Programme, Ministry of Internal Affairs and Communications. This work was partially supported by the Cabinet Office (CAO), Cross-ministerial Strategic Innovation Promotion Program (SIP), “An intelligent knowledge processing infrastructure, integrating physical and virtual domains” (funding agency: NEDO).
Publisher Copyright:
© 2020 IEEE.
PY - 2020/12/2
Y1 - 2020/12/2
N2 - This paper presents the design of the micro energy harvesting circuit (MEH) for sensor network systems by using radio wireless waves for wireless telecommunication system. A series L and C resonance circuit is connected in front of the RF-to-DC converting circuit in our proposed circuit in order to enhance the radio frequency (RF) signal. RF-to-DC converting circuit is based on the Dickson voltage multiplier and designed the cascode and cascade connection to obtain the high DC output voltage. Surface mount type devices such as diode, capacitor etc. are placed on the differential strip line. In the simulation, cascade structure has more than 2V DC output from 900MHz to 2.4GHz.
AB - This paper presents the design of the micro energy harvesting circuit (MEH) for sensor network systems by using radio wireless waves for wireless telecommunication system. A series L and C resonance circuit is connected in front of the RF-to-DC converting circuit in our proposed circuit in order to enhance the radio frequency (RF) signal. RF-to-DC converting circuit is based on the Dickson voltage multiplier and designed the cascode and cascade connection to obtain the high DC output voltage. Surface mount type devices such as diode, capacitor etc. are placed on the differential strip line. In the simulation, cascade structure has more than 2V DC output from 900MHz to 2.4GHz.
UR - http://www.scopus.com/inward/record.url?scp=85100149667&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85100149667&partnerID=8YFLogxK
U2 - 10.1109/EPTC50525.2020.9315008
DO - 10.1109/EPTC50525.2020.9315008
M3 - Conference contribution
AN - SCOPUS:85100149667
T3 - 2020 IEEE 22nd Electronics Packaging Technology Conference, EPTC 2020
SP - 152
EP - 155
BT - 2020 IEEE 22nd Electronics Packaging Technology Conference, EPTC 2020
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 22nd IEEE Electronics Packaging Technology Conference, EPTC 2020
Y2 - 2 December 2020 through 4 December 2020
ER -