Development of microparticle counting sensor based on structural and spectroscopic properties of metal mesh device

Hirokazu Seto, Atsushi Saiki, Ryosuke Matsushita, Wataru Mitsukami, Seiji Kamba, Makoto Hasegawa, Yoshiko Miura, Yumiko Hirohashi, Hiroyuki Shinto

Research output: Contribution to journalArticlepeer-review

Abstract

A microparticle counter based on a metal mesh device was developed. The metal mesh device had a lattice-shaped structure with well-regulated holes of 1.8 μm. The collection percentages of differently sized microparticles using the metal mesh device were determined by flow cytometry. The cut-off point and hole size of the metal mesh device were identical. Polystyrene microparticles were detected from changes in the spectroscopic properties of the metal mesh device. When microparticles were trapped on the holes of the metal mesh device, the transmittance in the infrared spectra decreased. Microparticles smaller than the holes were not detected by the metal mesh device, whereas 2 and 3 μm microparticles were detected. Polystyrene and silica microparticles could be counted using the metal mesh device via calibration curves between the concentration of microparticles and the change level in the transmittance of the metal mesh device. The separation of microparticles from a mixture suspension using the metal mesh device was evaluated. Unlike a microfiber filter, only 2 μm microparticles were collected from coexisting 1 μm microparticles by the metal mesh device. Owing to its high separation ability, the metal mesh device selectively detected 2 μm microparticles in coexisting 10-equivalence 1 μm microparticles.

Original languageEnglish
Pages (from-to)1920-1926
Number of pages7
JournalAdvanced Powder Technology
Volume32
Issue number6
DOIs
Publication statusPublished - Jun 2021

All Science Journal Classification (ASJC) codes

  • Chemical Engineering(all)
  • Mechanics of Materials

Fingerprint Dive into the research topics of 'Development of microparticle counting sensor based on structural and spectroscopic properties of metal mesh device'. Together they form a unique fingerprint.

Cite this