Development of peening technique using recirculating shot accelerated by water jet

A. Naito, Osamu Takakuwa, H. Soyama

Research output: Contribution to journalArticle

13 Citations (Scopus)

Abstract

The present paper demonstrates the development of a peening technique using recirculating shot accelerated by a water jet that can be used as a risk free treatment in power and chemical plants. Although it is important to increase the reliability of structural materials used in large scale structures, such as power and chemical plants, it is hazardous to treat these structures by general shot peening (SP) techniques because of the risk of sparks and dust explosions. In the present study, an SP technique using a water jet to accelerate shot has been developed, and the conditions under which it is used have been optimised in terms of nozzle geometry, standoff distance and amount of shot. In order to demonstrate the effect of SP, austenitic stainless steel Japan Industries Standards SUS316L was peened and evaluated in terms of its residual stress, fatigue strength and resistance to stress corrosion cracking.

Original languageEnglish
Pages (from-to)234-239
Number of pages6
JournalMaterials Science and Technology
Volume28
Issue number2
DOIs
Publication statusPublished - Jan 16 2012
Externally publishedYes

Fingerprint

peening
shot peening
hydraulic jets
Shot peening
shot
power plants
Water
Chemical plants
nozzle geometry
stress corrosion cracking
Power plants
austenitic stainless steels
sparks
residual stress
explosions
Iron and steel industry
Japan
Stress corrosion cracking
Austenitic stainless steel
dust

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Development of peening technique using recirculating shot accelerated by water jet. / Naito, A.; Takakuwa, Osamu; Soyama, H.

In: Materials Science and Technology, Vol. 28, No. 2, 16.01.2012, p. 234-239.

Research output: Contribution to journalArticle

@article{9be68eb35afc4a39bee5fc1f8f27b488,
title = "Development of peening technique using recirculating shot accelerated by water jet",
abstract = "The present paper demonstrates the development of a peening technique using recirculating shot accelerated by a water jet that can be used as a risk free treatment in power and chemical plants. Although it is important to increase the reliability of structural materials used in large scale structures, such as power and chemical plants, it is hazardous to treat these structures by general shot peening (SP) techniques because of the risk of sparks and dust explosions. In the present study, an SP technique using a water jet to accelerate shot has been developed, and the conditions under which it is used have been optimised in terms of nozzle geometry, standoff distance and amount of shot. In order to demonstrate the effect of SP, austenitic stainless steel Japan Industries Standards SUS316L was peened and evaluated in terms of its residual stress, fatigue strength and resistance to stress corrosion cracking.",
author = "A. Naito and Osamu Takakuwa and H. Soyama",
year = "2012",
month = "1",
day = "16",
doi = "10.1179/1743284711Y.0000000027",
language = "English",
volume = "28",
pages = "234--239",
journal = "Materials Science and Technology",
issn = "0267-0836",
publisher = "Maney Publishing",
number = "2",

}

TY - JOUR

T1 - Development of peening technique using recirculating shot accelerated by water jet

AU - Naito, A.

AU - Takakuwa, Osamu

AU - Soyama, H.

PY - 2012/1/16

Y1 - 2012/1/16

N2 - The present paper demonstrates the development of a peening technique using recirculating shot accelerated by a water jet that can be used as a risk free treatment in power and chemical plants. Although it is important to increase the reliability of structural materials used in large scale structures, such as power and chemical plants, it is hazardous to treat these structures by general shot peening (SP) techniques because of the risk of sparks and dust explosions. In the present study, an SP technique using a water jet to accelerate shot has been developed, and the conditions under which it is used have been optimised in terms of nozzle geometry, standoff distance and amount of shot. In order to demonstrate the effect of SP, austenitic stainless steel Japan Industries Standards SUS316L was peened and evaluated in terms of its residual stress, fatigue strength and resistance to stress corrosion cracking.

AB - The present paper demonstrates the development of a peening technique using recirculating shot accelerated by a water jet that can be used as a risk free treatment in power and chemical plants. Although it is important to increase the reliability of structural materials used in large scale structures, such as power and chemical plants, it is hazardous to treat these structures by general shot peening (SP) techniques because of the risk of sparks and dust explosions. In the present study, an SP technique using a water jet to accelerate shot has been developed, and the conditions under which it is used have been optimised in terms of nozzle geometry, standoff distance and amount of shot. In order to demonstrate the effect of SP, austenitic stainless steel Japan Industries Standards SUS316L was peened and evaluated in terms of its residual stress, fatigue strength and resistance to stress corrosion cracking.

UR - http://www.scopus.com/inward/record.url?scp=84855646554&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84855646554&partnerID=8YFLogxK

U2 - 10.1179/1743284711Y.0000000027

DO - 10.1179/1743284711Y.0000000027

M3 - Article

AN - SCOPUS:84855646554

VL - 28

SP - 234

EP - 239

JO - Materials Science and Technology

JF - Materials Science and Technology

SN - 0267-0836

IS - 2

ER -