Development of shintake beam size monitor for ATF2

Y. Kamiya, S. Komamiya, M. Oroku, Taikan Suehara, Y. Yamaguchi, T. Yamanaka, S. Araki, T. Okugi, T. Tauchi, N. Terunuma, J. Urakawa

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

In this paper, we describe a system design and current status of Shintake beam size monitor. Shintake monitor is a laser-based beam diagnostics tool, which provides a non-invasive measurement of transverse beam sizes. The interaction target probing the electron beam is interference fringes build up by the two coherent lasers that have narrow bandwidth and long coherent length. A scale of the target structure corresponds to approximately one fourth of the laser wave length, and the smallest measurable size reaches down to several tens of nanometers. The monitor we described here is installed at the virtual interaction point of the ATF2 beam line, which is built to confirm the proposed final focus system for Future Linear Colliders. We adopt second harmonics of Nd:YAG laser of 532 nm wavelength, and phase stabilization feedback system to allow to measure the designed beam size of about 37 nm. To widen a measurable range up to about 5 microns (wire scanner's range), we also prepare three crossing modes that change an effective wavelength for the fringes. The monitor is used to measure a focus size during the tuning process. The system is based on the Shintake monitor for FFTB.

Original languageEnglish
Title of host publicationIPAC 2010 - 1st International Particle Accelerator Conference
Pages1011-1013
Number of pages3
Publication statusPublished - Dec 1 2010
Event1st International Particle Accelerator Conference, IPAC 2010 - Kyoto, Japan
Duration: May 23 2010May 28 2010

Publication series

NameIPAC 2010 - 1st International Particle Accelerator Conference

Other

Other1st International Particle Accelerator Conference, IPAC 2010
CountryJapan
CityKyoto
Period5/23/105/28/10

Fingerprint

monitors
lasers
wavelengths
systems engineering
scanners
YAG lasers
stabilization
tuning
interactions
wire
electron beams
bandwidth
interference
harmonics

All Science Journal Classification (ASJC) codes

  • Nuclear and High Energy Physics

Cite this

Kamiya, Y., Komamiya, S., Oroku, M., Suehara, T., Yamaguchi, Y., Yamanaka, T., ... Urakawa, J. (2010). Development of shintake beam size monitor for ATF2. In IPAC 2010 - 1st International Particle Accelerator Conference (pp. 1011-1013). (IPAC 2010 - 1st International Particle Accelerator Conference).

Development of shintake beam size monitor for ATF2. / Kamiya, Y.; Komamiya, S.; Oroku, M.; Suehara, Taikan; Yamaguchi, Y.; Yamanaka, T.; Araki, S.; Okugi, T.; Tauchi, T.; Terunuma, N.; Urakawa, J.

IPAC 2010 - 1st International Particle Accelerator Conference. 2010. p. 1011-1013 (IPAC 2010 - 1st International Particle Accelerator Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kamiya, Y, Komamiya, S, Oroku, M, Suehara, T, Yamaguchi, Y, Yamanaka, T, Araki, S, Okugi, T, Tauchi, T, Terunuma, N & Urakawa, J 2010, Development of shintake beam size monitor for ATF2. in IPAC 2010 - 1st International Particle Accelerator Conference. IPAC 2010 - 1st International Particle Accelerator Conference, pp. 1011-1013, 1st International Particle Accelerator Conference, IPAC 2010, Kyoto, Japan, 5/23/10.
Kamiya Y, Komamiya S, Oroku M, Suehara T, Yamaguchi Y, Yamanaka T et al. Development of shintake beam size monitor for ATF2. In IPAC 2010 - 1st International Particle Accelerator Conference. 2010. p. 1011-1013. (IPAC 2010 - 1st International Particle Accelerator Conference).
Kamiya, Y. ; Komamiya, S. ; Oroku, M. ; Suehara, Taikan ; Yamaguchi, Y. ; Yamanaka, T. ; Araki, S. ; Okugi, T. ; Tauchi, T. ; Terunuma, N. ; Urakawa, J. / Development of shintake beam size monitor for ATF2. IPAC 2010 - 1st International Particle Accelerator Conference. 2010. pp. 1011-1013 (IPAC 2010 - 1st International Particle Accelerator Conference).
@inproceedings{a9f47a8cafe44651a7ca630652f5d1b3,
title = "Development of shintake beam size monitor for ATF2",
abstract = "In this paper, we describe a system design and current status of Shintake beam size monitor. Shintake monitor is a laser-based beam diagnostics tool, which provides a non-invasive measurement of transverse beam sizes. The interaction target probing the electron beam is interference fringes build up by the two coherent lasers that have narrow bandwidth and long coherent length. A scale of the target structure corresponds to approximately one fourth of the laser wave length, and the smallest measurable size reaches down to several tens of nanometers. The monitor we described here is installed at the virtual interaction point of the ATF2 beam line, which is built to confirm the proposed final focus system for Future Linear Colliders. We adopt second harmonics of Nd:YAG laser of 532 nm wavelength, and phase stabilization feedback system to allow to measure the designed beam size of about 37 nm. To widen a measurable range up to about 5 microns (wire scanner's range), we also prepare three crossing modes that change an effective wavelength for the fringes. The monitor is used to measure a focus size during the tuning process. The system is based on the Shintake monitor for FFTB.",
author = "Y. Kamiya and S. Komamiya and M. Oroku and Taikan Suehara and Y. Yamaguchi and T. Yamanaka and S. Araki and T. Okugi and T. Tauchi and N. Terunuma and J. Urakawa",
year = "2010",
month = "12",
day = "1",
language = "English",
isbn = "9789290833529",
series = "IPAC 2010 - 1st International Particle Accelerator Conference",
pages = "1011--1013",
booktitle = "IPAC 2010 - 1st International Particle Accelerator Conference",

}

TY - GEN

T1 - Development of shintake beam size monitor for ATF2

AU - Kamiya, Y.

AU - Komamiya, S.

AU - Oroku, M.

AU - Suehara, Taikan

AU - Yamaguchi, Y.

AU - Yamanaka, T.

AU - Araki, S.

AU - Okugi, T.

AU - Tauchi, T.

AU - Terunuma, N.

AU - Urakawa, J.

PY - 2010/12/1

Y1 - 2010/12/1

N2 - In this paper, we describe a system design and current status of Shintake beam size monitor. Shintake monitor is a laser-based beam diagnostics tool, which provides a non-invasive measurement of transverse beam sizes. The interaction target probing the electron beam is interference fringes build up by the two coherent lasers that have narrow bandwidth and long coherent length. A scale of the target structure corresponds to approximately one fourth of the laser wave length, and the smallest measurable size reaches down to several tens of nanometers. The monitor we described here is installed at the virtual interaction point of the ATF2 beam line, which is built to confirm the proposed final focus system for Future Linear Colliders. We adopt second harmonics of Nd:YAG laser of 532 nm wavelength, and phase stabilization feedback system to allow to measure the designed beam size of about 37 nm. To widen a measurable range up to about 5 microns (wire scanner's range), we also prepare three crossing modes that change an effective wavelength for the fringes. The monitor is used to measure a focus size during the tuning process. The system is based on the Shintake monitor for FFTB.

AB - In this paper, we describe a system design and current status of Shintake beam size monitor. Shintake monitor is a laser-based beam diagnostics tool, which provides a non-invasive measurement of transverse beam sizes. The interaction target probing the electron beam is interference fringes build up by the two coherent lasers that have narrow bandwidth and long coherent length. A scale of the target structure corresponds to approximately one fourth of the laser wave length, and the smallest measurable size reaches down to several tens of nanometers. The monitor we described here is installed at the virtual interaction point of the ATF2 beam line, which is built to confirm the proposed final focus system for Future Linear Colliders. We adopt second harmonics of Nd:YAG laser of 532 nm wavelength, and phase stabilization feedback system to allow to measure the designed beam size of about 37 nm. To widen a measurable range up to about 5 microns (wire scanner's range), we also prepare three crossing modes that change an effective wavelength for the fringes. The monitor is used to measure a focus size during the tuning process. The system is based on the Shintake monitor for FFTB.

UR - http://www.scopus.com/inward/record.url?scp=84880374559&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84880374559&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:84880374559

SN - 9789290833529

T3 - IPAC 2010 - 1st International Particle Accelerator Conference

SP - 1011

EP - 1013

BT - IPAC 2010 - 1st International Particle Accelerator Conference

ER -