Development of support system using pipe-jacking for the roof of the large caverns

T. Morita, F. Matsumoto, E. Sakai, Hideki Shimada, K. Matsui

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

In the urban area, many lifelines have been constructed in underground for many functions, such as electrical, gas, communication lines and water, sewer pipes. Due to this condition, it is demanded to construct for a new subway install at the deep underground with no disturbances on many existent infrastructures. In this case, the Pipe-Roof Method using steel pipes was applied for the support of the large cavern space at the new subway station, because no support drivage gave various influences to the upper existent lifelines. At this job-site, "Auger Type" machine for the general Pipe-Roof Method could not be adopted from the viewpoint of the difficulty, because the soil of this site consists of big cobble mingling gravel including maximum big cobble diameter 400mm with saturated underground water. So High Density Slurry Pipe Jacking method with cutter-face-pressure's control system was adopted for this pipe-roof construction as the new Pipe-Roof Method. This report discusses the example that the pipe jacking method was adopted for the advanced use in urban area's underground which the important structures are heavily crowded.

Original languageEnglish
Title of host publicationAustralasian Society for Trenchless Technology - 24th No-Dig International Conference and Exhibition, No-Dig Down Under 2006
Pages334-341
Number of pages8
Publication statusPublished - Dec 1 2006
Event24th No-Dig International Conference and Exhibition, No-Dig Down Under 2006 - Brisbane, QLD, Australia
Duration: Oct 29 2006Nov 2 2006

Publication series

NameAustralasian Society for Trenchless Technology - 24th No-Dig International Conference and Exhibition, No-Dig Down Under 2006

Other

Other24th No-Dig International Conference and Exhibition, No-Dig Down Under 2006
CountryAustralia
CityBrisbane, QLD
Period10/29/0611/2/06

Fingerprint

pipe jacking
support systems
roofs
cavern
Roofs
roof
pipe
Pipe
urban area
Subway stations
sewers
Subways
cutters
Pressure control
Sewers
gravels
Steel pipe
slurry
Gravel
control system

All Science Journal Classification (ASJC) codes

  • Geology
  • Geophysics
  • Geotechnical Engineering and Engineering Geology
  • Civil and Structural Engineering
  • Mechanical Engineering
  • Building and Construction

Cite this

Morita, T., Matsumoto, F., Sakai, E., Shimada, H., & Matsui, K. (2006). Development of support system using pipe-jacking for the roof of the large caverns. In Australasian Society for Trenchless Technology - 24th No-Dig International Conference and Exhibition, No-Dig Down Under 2006 (pp. 334-341). (Australasian Society for Trenchless Technology - 24th No-Dig International Conference and Exhibition, No-Dig Down Under 2006).

Development of support system using pipe-jacking for the roof of the large caverns. / Morita, T.; Matsumoto, F.; Sakai, E.; Shimada, Hideki; Matsui, K.

Australasian Society for Trenchless Technology - 24th No-Dig International Conference and Exhibition, No-Dig Down Under 2006. 2006. p. 334-341 (Australasian Society for Trenchless Technology - 24th No-Dig International Conference and Exhibition, No-Dig Down Under 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Morita, T, Matsumoto, F, Sakai, E, Shimada, H & Matsui, K 2006, Development of support system using pipe-jacking for the roof of the large caverns. in Australasian Society for Trenchless Technology - 24th No-Dig International Conference and Exhibition, No-Dig Down Under 2006. Australasian Society for Trenchless Technology - 24th No-Dig International Conference and Exhibition, No-Dig Down Under 2006, pp. 334-341, 24th No-Dig International Conference and Exhibition, No-Dig Down Under 2006, Brisbane, QLD, Australia, 10/29/06.
Morita T, Matsumoto F, Sakai E, Shimada H, Matsui K. Development of support system using pipe-jacking for the roof of the large caverns. In Australasian Society for Trenchless Technology - 24th No-Dig International Conference and Exhibition, No-Dig Down Under 2006. 2006. p. 334-341. (Australasian Society for Trenchless Technology - 24th No-Dig International Conference and Exhibition, No-Dig Down Under 2006).
Morita, T. ; Matsumoto, F. ; Sakai, E. ; Shimada, Hideki ; Matsui, K. / Development of support system using pipe-jacking for the roof of the large caverns. Australasian Society for Trenchless Technology - 24th No-Dig International Conference and Exhibition, No-Dig Down Under 2006. 2006. pp. 334-341 (Australasian Society for Trenchless Technology - 24th No-Dig International Conference and Exhibition, No-Dig Down Under 2006).
@inproceedings{d2201e7c7bf5488f818777cebd7a425f,
title = "Development of support system using pipe-jacking for the roof of the large caverns",
abstract = "In the urban area, many lifelines have been constructed in underground for many functions, such as electrical, gas, communication lines and water, sewer pipes. Due to this condition, it is demanded to construct for a new subway install at the deep underground with no disturbances on many existent infrastructures. In this case, the Pipe-Roof Method using steel pipes was applied for the support of the large cavern space at the new subway station, because no support drivage gave various influences to the upper existent lifelines. At this job-site, {"}Auger Type{"} machine for the general Pipe-Roof Method could not be adopted from the viewpoint of the difficulty, because the soil of this site consists of big cobble mingling gravel including maximum big cobble diameter 400mm with saturated underground water. So High Density Slurry Pipe Jacking method with cutter-face-pressure's control system was adopted for this pipe-roof construction as the new Pipe-Roof Method. This report discusses the example that the pipe jacking method was adopted for the advanced use in urban area's underground which the important structures are heavily crowded.",
author = "T. Morita and F. Matsumoto and E. Sakai and Hideki Shimada and K. Matsui",
year = "2006",
month = "12",
day = "1",
language = "English",
isbn = "9781604232899",
series = "Australasian Society for Trenchless Technology - 24th No-Dig International Conference and Exhibition, No-Dig Down Under 2006",
pages = "334--341",
booktitle = "Australasian Society for Trenchless Technology - 24th No-Dig International Conference and Exhibition, No-Dig Down Under 2006",

}

TY - GEN

T1 - Development of support system using pipe-jacking for the roof of the large caverns

AU - Morita, T.

AU - Matsumoto, F.

AU - Sakai, E.

AU - Shimada, Hideki

AU - Matsui, K.

PY - 2006/12/1

Y1 - 2006/12/1

N2 - In the urban area, many lifelines have been constructed in underground for many functions, such as electrical, gas, communication lines and water, sewer pipes. Due to this condition, it is demanded to construct for a new subway install at the deep underground with no disturbances on many existent infrastructures. In this case, the Pipe-Roof Method using steel pipes was applied for the support of the large cavern space at the new subway station, because no support drivage gave various influences to the upper existent lifelines. At this job-site, "Auger Type" machine for the general Pipe-Roof Method could not be adopted from the viewpoint of the difficulty, because the soil of this site consists of big cobble mingling gravel including maximum big cobble diameter 400mm with saturated underground water. So High Density Slurry Pipe Jacking method with cutter-face-pressure's control system was adopted for this pipe-roof construction as the new Pipe-Roof Method. This report discusses the example that the pipe jacking method was adopted for the advanced use in urban area's underground which the important structures are heavily crowded.

AB - In the urban area, many lifelines have been constructed in underground for many functions, such as electrical, gas, communication lines and water, sewer pipes. Due to this condition, it is demanded to construct for a new subway install at the deep underground with no disturbances on many existent infrastructures. In this case, the Pipe-Roof Method using steel pipes was applied for the support of the large cavern space at the new subway station, because no support drivage gave various influences to the upper existent lifelines. At this job-site, "Auger Type" machine for the general Pipe-Roof Method could not be adopted from the viewpoint of the difficulty, because the soil of this site consists of big cobble mingling gravel including maximum big cobble diameter 400mm with saturated underground water. So High Density Slurry Pipe Jacking method with cutter-face-pressure's control system was adopted for this pipe-roof construction as the new Pipe-Roof Method. This report discusses the example that the pipe jacking method was adopted for the advanced use in urban area's underground which the important structures are heavily crowded.

UR - http://www.scopus.com/inward/record.url?scp=84887876195&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84887876195&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:84887876195

SN - 9781604232899

T3 - Australasian Society for Trenchless Technology - 24th No-Dig International Conference and Exhibition, No-Dig Down Under 2006

SP - 334

EP - 341

BT - Australasian Society for Trenchless Technology - 24th No-Dig International Conference and Exhibition, No-Dig Down Under 2006

ER -