Dislocation evolution during thermal creep deformation in V-4Cr-4Ti with various thermal and mechanical treatments

T. Muroga, T. Nagasaka, P. F. Zheng, Y. F. Li, H. Watanabe

Research output: Contribution to journalArticle

7 Citations (Scopus)

Abstract

Dislocation evolution during thermal creep deformation was investigated at 1023 K for V-4Cr-4Ti alloys with various thermal and mechanical treatments. Changes in the density and Burgers vector of dislocations were examined with various materials and experimental variables (e.g., cold work introducing dislocations, thermal aging introducing high density of Ti-rich precipitates, applied stress, and creep deformation levels). The Burgers vector analysis showed that, in the annealed specimens, dislocations induced by the thermal creep were predominantly of a/2〈1 1 1〉 type. The densities of a〈1 0 0〉 and a/2〈1 1 1〉 type dislocations were comparable for the cold worked V-4Cr-4Ti, but the fraction of a/2〈1 1 1〉 type dislocations increased with the creep deformation. Similar changes to the Burgers vector fraction were observed for specimens with a high density of precipitation prior to the cold work. On the other hand, cold work followed by aging (i.e., strain aging) was effective in keeping dislocation structures during the creep deformation.

Original languageEnglish
Pages (from-to)S354-S359
JournalJournal of Nuclear Materials
Volume442
Issue number1-3 SUPPL.1
DOIs
Publication statusPublished - 2013

All Science Journal Classification (ASJC) codes

  • Nuclear and High Energy Physics
  • Materials Science(all)
  • Nuclear Energy and Engineering

Fingerprint Dive into the research topics of 'Dislocation evolution during thermal creep deformation in V-4Cr-4Ti with various thermal and mechanical treatments'. Together they form a unique fingerprint.

  • Cite this