Distributed Feedback Lasers and Light-Emitting Diodes Using 1-Naphthylmethylamnonium Low-Dimensional Perovskite

Matthew R. Leyden, Shinobu Terakawa, Toshinori Matsusima, Shibin Ruan, Kenichi Goshi, Morgan Auffray, Atula S.D. Sandanayaka, Chuanjiang Qin, Fatima Bencheikh, Chihaya Adachi

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

This work investigates the feasibility of using low-dimensional perovskites for electrically driven lasers given the current status of perovskite light-emitting diodes and optically pumped lasers. In our progress toward electrically driven lasers, we performed a variety of measurements on bulk and low-dimensional perovskite films to give a baseline for expectations. This included the measurement of amplified spontaneous emission, lasing, and near-infrared light-emitting diodes operated at low and high current density. We considered power density thresholds needed for amplified spontaneous emission and lasing and compared this to light-emitting diodes operated at high current density to speculate on the future of electrically driven perovskite lasers. We concluded that our current perovskite devices will need current densities of 4 to 10 kA/cm 2 to achieve lasing. Future devices will most significantly benefit from architectures that accommodate higher current, but meaningful reductions in threshold may also come from improved film quality and confinement.

Original languageEnglish
Pages (from-to)460-466
Number of pages7
JournalACS Photonics
Volume6
Issue number2
DOIs
Publication statusPublished - Feb 20 2019

Fingerprint

Distributed feedback lasers
distributed feedback lasers
Perovskite
Light emitting diodes
Lasers
light emitting diodes
high current
lasing
Light
Current density
Spontaneous emission
current density
spontaneous emission
lasers
Optically pumped lasers
Equipment and Supplies
thresholds
perovskites
low currents
radiant flux density

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Biotechnology
  • Atomic and Molecular Physics, and Optics
  • Electrical and Electronic Engineering

Cite this

Distributed Feedback Lasers and Light-Emitting Diodes Using 1-Naphthylmethylamnonium Low-Dimensional Perovskite. / Leyden, Matthew R.; Terakawa, Shinobu; Matsusima, Toshinori; Ruan, Shibin; Goshi, Kenichi; Auffray, Morgan; Sandanayaka, Atula S.D.; Qin, Chuanjiang; Bencheikh, Fatima; Adachi, Chihaya.

In: ACS Photonics, Vol. 6, No. 2, 20.02.2019, p. 460-466.

Research output: Contribution to journalArticle

Leyden, Matthew R. ; Terakawa, Shinobu ; Matsusima, Toshinori ; Ruan, Shibin ; Goshi, Kenichi ; Auffray, Morgan ; Sandanayaka, Atula S.D. ; Qin, Chuanjiang ; Bencheikh, Fatima ; Adachi, Chihaya. / Distributed Feedback Lasers and Light-Emitting Diodes Using 1-Naphthylmethylamnonium Low-Dimensional Perovskite. In: ACS Photonics. 2019 ; Vol. 6, No. 2. pp. 460-466.
@article{8f50dc2db947493b9597c7a4374e4c60,
title = "Distributed Feedback Lasers and Light-Emitting Diodes Using 1-Naphthylmethylamnonium Low-Dimensional Perovskite",
abstract = "This work investigates the feasibility of using low-dimensional perovskites for electrically driven lasers given the current status of perovskite light-emitting diodes and optically pumped lasers. In our progress toward electrically driven lasers, we performed a variety of measurements on bulk and low-dimensional perovskite films to give a baseline for expectations. This included the measurement of amplified spontaneous emission, lasing, and near-infrared light-emitting diodes operated at low and high current density. We considered power density thresholds needed for amplified spontaneous emission and lasing and compared this to light-emitting diodes operated at high current density to speculate on the future of electrically driven perovskite lasers. We concluded that our current perovskite devices will need current densities of 4 to 10 kA/cm 2 to achieve lasing. Future devices will most significantly benefit from architectures that accommodate higher current, but meaningful reductions in threshold may also come from improved film quality and confinement.",
author = "Leyden, {Matthew R.} and Shinobu Terakawa and Toshinori Matsusima and Shibin Ruan and Kenichi Goshi and Morgan Auffray and Sandanayaka, {Atula S.D.} and Chuanjiang Qin and Fatima Bencheikh and Chihaya Adachi",
year = "2019",
month = "2",
day = "20",
doi = "10.1021/acsphotonics.8b01413",
language = "English",
volume = "6",
pages = "460--466",
journal = "ACS Photonics",
issn = "2330-4022",
publisher = "American Chemical Society",
number = "2",

}

TY - JOUR

T1 - Distributed Feedback Lasers and Light-Emitting Diodes Using 1-Naphthylmethylamnonium Low-Dimensional Perovskite

AU - Leyden, Matthew R.

AU - Terakawa, Shinobu

AU - Matsusima, Toshinori

AU - Ruan, Shibin

AU - Goshi, Kenichi

AU - Auffray, Morgan

AU - Sandanayaka, Atula S.D.

AU - Qin, Chuanjiang

AU - Bencheikh, Fatima

AU - Adachi, Chihaya

PY - 2019/2/20

Y1 - 2019/2/20

N2 - This work investigates the feasibility of using low-dimensional perovskites for electrically driven lasers given the current status of perovskite light-emitting diodes and optically pumped lasers. In our progress toward electrically driven lasers, we performed a variety of measurements on bulk and low-dimensional perovskite films to give a baseline for expectations. This included the measurement of amplified spontaneous emission, lasing, and near-infrared light-emitting diodes operated at low and high current density. We considered power density thresholds needed for amplified spontaneous emission and lasing and compared this to light-emitting diodes operated at high current density to speculate on the future of electrically driven perovskite lasers. We concluded that our current perovskite devices will need current densities of 4 to 10 kA/cm 2 to achieve lasing. Future devices will most significantly benefit from architectures that accommodate higher current, but meaningful reductions in threshold may also come from improved film quality and confinement.

AB - This work investigates the feasibility of using low-dimensional perovskites for electrically driven lasers given the current status of perovskite light-emitting diodes and optically pumped lasers. In our progress toward electrically driven lasers, we performed a variety of measurements on bulk and low-dimensional perovskite films to give a baseline for expectations. This included the measurement of amplified spontaneous emission, lasing, and near-infrared light-emitting diodes operated at low and high current density. We considered power density thresholds needed for amplified spontaneous emission and lasing and compared this to light-emitting diodes operated at high current density to speculate on the future of electrically driven perovskite lasers. We concluded that our current perovskite devices will need current densities of 4 to 10 kA/cm 2 to achieve lasing. Future devices will most significantly benefit from architectures that accommodate higher current, but meaningful reductions in threshold may also come from improved film quality and confinement.

UR - http://www.scopus.com/inward/record.url?scp=85060276545&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85060276545&partnerID=8YFLogxK

U2 - 10.1021/acsphotonics.8b01413

DO - 10.1021/acsphotonics.8b01413

M3 - Article

AN - SCOPUS:85060276545

VL - 6

SP - 460

EP - 466

JO - ACS Photonics

JF - ACS Photonics

SN - 2330-4022

IS - 2

ER -