Effect of carbon dissolution reaction on wetting behavior between liquid iron and carbonaceous material

Ko-Ichiro Ohno, Takahiro Miyake, Shintaro Yano, Cao Son Nguyen, Takayuki Maeda, Kazuya Kunitomo

Research output: Contribution to journalArticle

Abstract

A low carbon operation is an unfavorable situation for liquid permeability around cohesive zone, because liquid volume will increase against solid coke in there. In order to keep a healthy operation with this technique, information of wetting behavior between liquid iron and coke should be correctly understood. However, there is not enough information about wetting behavior between them, because of many difficulties about wettability measurement from an active reaction between iron and carbonaceous materials. In this study, a sessile drop method with molten sample injection system was applied to measurement of wetting behavior between liquid iron and carbonaceous material at 1673 K for excluding reaction between samples before starting measurement. Carbonaceous material's substrates were made from mixture powder of graphite and alumina by hot press at 1873K. From the results, following knowledge was revealed. Molten iron samples un-saturated with carbon showed bigger values of contact angles, 110°-120°, at initial stage, than apparent constant values of them, 85°-100°, at latter stage. It indicated a reaction between iron and carbonaceous materials had obvious effect on wetting behavior between them due to decrease an interfacial energy during the reaction. Mixed alumina powder in the substrate prevented to wetting behavior of iron sample on carbonaceous materials, and they changed their apparent constant contact angles from 115° to 130°. The alumina powder had effects on not only wetting behavior but also reaction between iron and carbonaceous materials.

Original languageEnglish
Pages (from-to)684-690
Number of pages7
JournalTetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
Volume102
Issue number12
DOIs
Publication statusPublished - Jan 1 2016

Fingerprint

carbonaceous materials
wetting
Wetting
dissolving
Dissolution
Carbon
Iron
iron
carbon
Liquids
liquids
Aluminum Oxide
Powders
Alumina
aluminum oxides
coke
Coke
Contact angle
Molten materials
interfacial energy

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Physical and Theoretical Chemistry
  • Metals and Alloys
  • Materials Chemistry

Cite this

Effect of carbon dissolution reaction on wetting behavior between liquid iron and carbonaceous material. / Ohno, Ko-Ichiro; Miyake, Takahiro; Yano, Shintaro; Nguyen, Cao Son; Maeda, Takayuki; Kunitomo, Kazuya.

In: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, Vol. 102, No. 12, 01.01.2016, p. 684-690.

Research output: Contribution to journalArticle

@article{63930932d2804d6cb30cd6c6f4d03cc8,
title = "Effect of carbon dissolution reaction on wetting behavior between liquid iron and carbonaceous material",
abstract = "A low carbon operation is an unfavorable situation for liquid permeability around cohesive zone, because liquid volume will increase against solid coke in there. In order to keep a healthy operation with this technique, information of wetting behavior between liquid iron and coke should be correctly understood. However, there is not enough information about wetting behavior between them, because of many difficulties about wettability measurement from an active reaction between iron and carbonaceous materials. In this study, a sessile drop method with molten sample injection system was applied to measurement of wetting behavior between liquid iron and carbonaceous material at 1673 K for excluding reaction between samples before starting measurement. Carbonaceous material's substrates were made from mixture powder of graphite and alumina by hot press at 1873K. From the results, following knowledge was revealed. Molten iron samples un-saturated with carbon showed bigger values of contact angles, 110°-120°, at initial stage, than apparent constant values of them, 85°-100°, at latter stage. It indicated a reaction between iron and carbonaceous materials had obvious effect on wetting behavior between them due to decrease an interfacial energy during the reaction. Mixed alumina powder in the substrate prevented to wetting behavior of iron sample on carbonaceous materials, and they changed their apparent constant contact angles from 115° to 130°. The alumina powder had effects on not only wetting behavior but also reaction between iron and carbonaceous materials.",
author = "Ko-Ichiro Ohno and Takahiro Miyake and Shintaro Yano and Nguyen, {Cao Son} and Takayuki Maeda and Kazuya Kunitomo",
year = "2016",
month = "1",
day = "1",
doi = "10.2355/tetsutohagane.TETSU-2016-048",
language = "English",
volume = "102",
pages = "684--690",
journal = "Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan",
issn = "0021-1575",
publisher = "一般社団法人 日本鉄鋼協会",
number = "12",

}

TY - JOUR

T1 - Effect of carbon dissolution reaction on wetting behavior between liquid iron and carbonaceous material

AU - Ohno, Ko-Ichiro

AU - Miyake, Takahiro

AU - Yano, Shintaro

AU - Nguyen, Cao Son

AU - Maeda, Takayuki

AU - Kunitomo, Kazuya

PY - 2016/1/1

Y1 - 2016/1/1

N2 - A low carbon operation is an unfavorable situation for liquid permeability around cohesive zone, because liquid volume will increase against solid coke in there. In order to keep a healthy operation with this technique, information of wetting behavior between liquid iron and coke should be correctly understood. However, there is not enough information about wetting behavior between them, because of many difficulties about wettability measurement from an active reaction between iron and carbonaceous materials. In this study, a sessile drop method with molten sample injection system was applied to measurement of wetting behavior between liquid iron and carbonaceous material at 1673 K for excluding reaction between samples before starting measurement. Carbonaceous material's substrates were made from mixture powder of graphite and alumina by hot press at 1873K. From the results, following knowledge was revealed. Molten iron samples un-saturated with carbon showed bigger values of contact angles, 110°-120°, at initial stage, than apparent constant values of them, 85°-100°, at latter stage. It indicated a reaction between iron and carbonaceous materials had obvious effect on wetting behavior between them due to decrease an interfacial energy during the reaction. Mixed alumina powder in the substrate prevented to wetting behavior of iron sample on carbonaceous materials, and they changed their apparent constant contact angles from 115° to 130°. The alumina powder had effects on not only wetting behavior but also reaction between iron and carbonaceous materials.

AB - A low carbon operation is an unfavorable situation for liquid permeability around cohesive zone, because liquid volume will increase against solid coke in there. In order to keep a healthy operation with this technique, information of wetting behavior between liquid iron and coke should be correctly understood. However, there is not enough information about wetting behavior between them, because of many difficulties about wettability measurement from an active reaction between iron and carbonaceous materials. In this study, a sessile drop method with molten sample injection system was applied to measurement of wetting behavior between liquid iron and carbonaceous material at 1673 K for excluding reaction between samples before starting measurement. Carbonaceous material's substrates were made from mixture powder of graphite and alumina by hot press at 1873K. From the results, following knowledge was revealed. Molten iron samples un-saturated with carbon showed bigger values of contact angles, 110°-120°, at initial stage, than apparent constant values of them, 85°-100°, at latter stage. It indicated a reaction between iron and carbonaceous materials had obvious effect on wetting behavior between them due to decrease an interfacial energy during the reaction. Mixed alumina powder in the substrate prevented to wetting behavior of iron sample on carbonaceous materials, and they changed their apparent constant contact angles from 115° to 130°. The alumina powder had effects on not only wetting behavior but also reaction between iron and carbonaceous materials.

UR - http://www.scopus.com/inward/record.url?scp=85007595772&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85007595772&partnerID=8YFLogxK

U2 - 10.2355/tetsutohagane.TETSU-2016-048

DO - 10.2355/tetsutohagane.TETSU-2016-048

M3 - Article

VL - 102

SP - 684

EP - 690

JO - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

JF - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

SN - 0021-1575

IS - 12

ER -