Effect of combined shot treatment and nitriding on galling property of die used for high strength steels

Masatoshi Aramaki, Naoya Yamada, Osamu Furukimi

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

The methodologies of controlling the surface texture of die by hybrid (double)-shot treatment and nitiding at a low temperature were examined for the development of long life cycle die applied to the high strength steel sheets. Hybrid-shot improved the galling property because of its lubricating effect, while nitriding at low temperature which is useful for decreasing distortion by heat-treatment had sufficient hardness of 1 500 HV for anti-abrasion. Surface texture of die material, evaluated by using Fast Fourier Transformation (FFT) analysis revealed that the ratio of the spectrum amplitude between high and low frequencies was corresponding to the galling generation load.

Original languageEnglish
Pages (from-to)1137-1141
Number of pages5
Journalisij international
Volume51
Issue number7
DOIs
Publication statusPublished - Jul 15 2011

Fingerprint

Nitriding
High strength steel
Textures
Steel sheet
Abrasion
Life cycle
Hardness
Heat treatment
Temperature

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

Cite this

Effect of combined shot treatment and nitriding on galling property of die used for high strength steels. / Aramaki, Masatoshi; Yamada, Naoya; Furukimi, Osamu.

In: isij international, Vol. 51, No. 7, 15.07.2011, p. 1137-1141.

Research output: Contribution to journalArticle

@article{688f53bc31a94cfd8315e12c95d14dad,
title = "Effect of combined shot treatment and nitriding on galling property of die used for high strength steels",
abstract = "The methodologies of controlling the surface texture of die by hybrid (double)-shot treatment and nitiding at a low temperature were examined for the development of long life cycle die applied to the high strength steel sheets. Hybrid-shot improved the galling property because of its lubricating effect, while nitriding at low temperature which is useful for decreasing distortion by heat-treatment had sufficient hardness of 1 500 HV for anti-abrasion. Surface texture of die material, evaluated by using Fast Fourier Transformation (FFT) analysis revealed that the ratio of the spectrum amplitude between high and low frequencies was corresponding to the galling generation load.",
author = "Masatoshi Aramaki and Naoya Yamada and Osamu Furukimi",
year = "2011",
month = "7",
day = "15",
doi = "10.2355/isijinternational.51.1137",
language = "English",
volume = "51",
pages = "1137--1141",
journal = "ISIJ International",
issn = "0915-1559",
publisher = "Iron and Steel Institute of Japan",
number = "7",

}

TY - JOUR

T1 - Effect of combined shot treatment and nitriding on galling property of die used for high strength steels

AU - Aramaki, Masatoshi

AU - Yamada, Naoya

AU - Furukimi, Osamu

PY - 2011/7/15

Y1 - 2011/7/15

N2 - The methodologies of controlling the surface texture of die by hybrid (double)-shot treatment and nitiding at a low temperature were examined for the development of long life cycle die applied to the high strength steel sheets. Hybrid-shot improved the galling property because of its lubricating effect, while nitriding at low temperature which is useful for decreasing distortion by heat-treatment had sufficient hardness of 1 500 HV for anti-abrasion. Surface texture of die material, evaluated by using Fast Fourier Transformation (FFT) analysis revealed that the ratio of the spectrum amplitude between high and low frequencies was corresponding to the galling generation load.

AB - The methodologies of controlling the surface texture of die by hybrid (double)-shot treatment and nitiding at a low temperature were examined for the development of long life cycle die applied to the high strength steel sheets. Hybrid-shot improved the galling property because of its lubricating effect, while nitriding at low temperature which is useful for decreasing distortion by heat-treatment had sufficient hardness of 1 500 HV for anti-abrasion. Surface texture of die material, evaluated by using Fast Fourier Transformation (FFT) analysis revealed that the ratio of the spectrum amplitude between high and low frequencies was corresponding to the galling generation load.

UR - http://www.scopus.com/inward/record.url?scp=80054087073&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80054087073&partnerID=8YFLogxK

U2 - 10.2355/isijinternational.51.1137

DO - 10.2355/isijinternational.51.1137

M3 - Article

AN - SCOPUS:80054087073

VL - 51

SP - 1137

EP - 1141

JO - ISIJ International

JF - ISIJ International

SN - 0915-1559

IS - 7

ER -