Effect of Cr content on the magnetic properties of Fe-Cr soft magnetic material by MIM process

Yohei Sano, Toshiko Osada, Kentaro Kudo, Fujio Tsumori, Hideshi Miura, Makiko Tange, Shigeo Tanaka

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

In recent years, the soft magnetic material parts have been widely used in the fields of industrial equipments, consumer electronics, automobiles, and so on. To fabricate these soft magnetic material parts, electrical steel and P/M method is normaly used. With the increase of fabricating complex shaped parts, processing method with more flexibility in design also be needed. For this reason, MIM process is hoped to be a near-net-shape, cost reduction and mass production method which can fabricate three-dimensional complex shaped parts. Fe-Cr-based soft magnetic material is developed in 1960s∼1970s to be used in corrosive environments. Because it is less expensive than the PB permalloy. Mainly composition comprising a 13 %Cr or higher is used to make material stable. However, the maximum magnetic flux density of material decreases with increase of Cr content. In this research, the effect of Cr content on the magnetic properties under DC and AC magnetic field were investigated by mixing SUS430L alloy powder and iron powder.

Original languageEnglish
Pages (from-to)431-436
Number of pages6
JournalFuntai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
Volume62
Issue number8
DOIs
Publication statusPublished - Aug 1 2015

Fingerprint

Soft magnetic materials
Magnetic properties
Caustics
Iron powder
Consumer electronics
Steel
Magnetic flux
Cost reduction
Powders
Automobiles
Magnetic fields
Processing
Chemical analysis

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering
  • Metals and Alloys
  • Materials Chemistry

Cite this

Effect of Cr content on the magnetic properties of Fe-Cr soft magnetic material by MIM process. / Sano, Yohei; Osada, Toshiko; Kudo, Kentaro; Tsumori, Fujio; Miura, Hideshi; Tange, Makiko; Tanaka, Shigeo.

In: Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 62, No. 8, 01.08.2015, p. 431-436.

Research output: Contribution to journalArticle

@article{3c3949d8cf6349f3beee435a7bc52fea,
title = "Effect of Cr content on the magnetic properties of Fe-Cr soft magnetic material by MIM process",
abstract = "In recent years, the soft magnetic material parts have been widely used in the fields of industrial equipments, consumer electronics, automobiles, and so on. To fabricate these soft magnetic material parts, electrical steel and P/M method is normaly used. With the increase of fabricating complex shaped parts, processing method with more flexibility in design also be needed. For this reason, MIM process is hoped to be a near-net-shape, cost reduction and mass production method which can fabricate three-dimensional complex shaped parts. Fe-Cr-based soft magnetic material is developed in 1960s∼1970s to be used in corrosive environments. Because it is less expensive than the PB permalloy. Mainly composition comprising a 13 {\%}Cr or higher is used to make material stable. However, the maximum magnetic flux density of material decreases with increase of Cr content. In this research, the effect of Cr content on the magnetic properties under DC and AC magnetic field were investigated by mixing SUS430L alloy powder and iron powder.",
author = "Yohei Sano and Toshiko Osada and Kentaro Kudo and Fujio Tsumori and Hideshi Miura and Makiko Tange and Shigeo Tanaka",
year = "2015",
month = "8",
day = "1",
doi = "10.2497/jjspm.62.431",
language = "English",
volume = "62",
pages = "431--436",
journal = "Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy",
issn = "0532-8799",
publisher = "Japan Society of Powder and Powder Metallurgy",
number = "8",

}

TY - JOUR

T1 - Effect of Cr content on the magnetic properties of Fe-Cr soft magnetic material by MIM process

AU - Sano, Yohei

AU - Osada, Toshiko

AU - Kudo, Kentaro

AU - Tsumori, Fujio

AU - Miura, Hideshi

AU - Tange, Makiko

AU - Tanaka, Shigeo

PY - 2015/8/1

Y1 - 2015/8/1

N2 - In recent years, the soft magnetic material parts have been widely used in the fields of industrial equipments, consumer electronics, automobiles, and so on. To fabricate these soft magnetic material parts, electrical steel and P/M method is normaly used. With the increase of fabricating complex shaped parts, processing method with more flexibility in design also be needed. For this reason, MIM process is hoped to be a near-net-shape, cost reduction and mass production method which can fabricate three-dimensional complex shaped parts. Fe-Cr-based soft magnetic material is developed in 1960s∼1970s to be used in corrosive environments. Because it is less expensive than the PB permalloy. Mainly composition comprising a 13 %Cr or higher is used to make material stable. However, the maximum magnetic flux density of material decreases with increase of Cr content. In this research, the effect of Cr content on the magnetic properties under DC and AC magnetic field were investigated by mixing SUS430L alloy powder and iron powder.

AB - In recent years, the soft magnetic material parts have been widely used in the fields of industrial equipments, consumer electronics, automobiles, and so on. To fabricate these soft magnetic material parts, electrical steel and P/M method is normaly used. With the increase of fabricating complex shaped parts, processing method with more flexibility in design also be needed. For this reason, MIM process is hoped to be a near-net-shape, cost reduction and mass production method which can fabricate three-dimensional complex shaped parts. Fe-Cr-based soft magnetic material is developed in 1960s∼1970s to be used in corrosive environments. Because it is less expensive than the PB permalloy. Mainly composition comprising a 13 %Cr or higher is used to make material stable. However, the maximum magnetic flux density of material decreases with increase of Cr content. In this research, the effect of Cr content on the magnetic properties under DC and AC magnetic field were investigated by mixing SUS430L alloy powder and iron powder.

UR - http://www.scopus.com/inward/record.url?scp=84940373214&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84940373214&partnerID=8YFLogxK

U2 - 10.2497/jjspm.62.431

DO - 10.2497/jjspm.62.431

M3 - Article

VL - 62

SP - 431

EP - 436

JO - Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy

JF - Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy

SN - 0532-8799

IS - 8

ER -