Effect of graphite diameter added on the tensile strength of Fe-Cu-C sintered material

Masatoshi Aramaki, Tomoki Nakao, Shigeru Unami, Osamu Furukimi

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

It is well known that the pore morphology has a direct effect on the strength of sintered material. On the other hand, the strength of sintered material is influenced by the microstructure. In this study, the effects of graphite powder diameter on the pore morphology and the microstructure of Fe-2%Cu-C sintered materials, where the graphite powder amount added was 0.6, 0.8 and 1.0mass%, were examined. The main results are as follows; (1) With decrease in the graphite powder diameter from 17 to 1.5μm, the pore size after sintering was reduced. (2) The tensile strength of sintered materials indicated a peak at 4.2μm of the graphite particle diameter. (3) The tensile strength was correlated to the area fraction of pearlite.

Original languageEnglish
Pages (from-to)495-501
Number of pages7
JournalFuntai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
Volume56
Issue number8
DOIs
Publication statusPublished - Aug 1 2009

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Effect of graphite diameter added on the tensile strength of Fe-Cu-C sintered material'. Together they form a unique fingerprint.

  • Cite this