Effect of grinding on the rate of oxidation of pyrite by oxygen in acid solutions

Research output: Contribution to journalArticle

36 Citations (Scopus)

Abstract

Solubility of pyrite (FeS2) ground for different periods was investigated in acid solutions in air. In the initial dissolution, up to 50 h, the dissolution rate, r, was high, due to oxidized species such as FeSO4 formed by grinding. After 50 h, the surface of pyrite was exposed and the dissolution rate decreased. The formation and dissolution of oxidized species were confirmed by X-ray photoelectron spectroscopy, XPS. From the dissolution rates of Fe and S species, rFe and rS, for 50-200 h, it was found that pyrite dissolves nonstoichiometrically ( rS rFe < 2) and that grinding promotes the dissolution of sulfur species leading to the stoichiometric dissolution ( rS rFe = 2). The increase in rS can be explained by the displacement of S atoms in the crystal due to the grinding. The effective Debye-Waller parameter, Beff, depends on the displacement of constituent atoms in the crystal from their equilibrium positions and is measured from the diffraction intensities of X-rays. The parameter for S atoms in pyrite, Beff(S), increased by one or two orders of magnitude with increasing grinding time, tG, while that for the pyrite, Beff(FeS2), did not change markedly. It was established that rS is closely related to Beff(S). The phenomenon may be regarded as a type of mechanical activation.

Original languageEnglish
Pages (from-to)4649-4655
Number of pages7
JournalGeochimica et Cosmochimica Acta
Volume58
Issue number21
DOIs
Publication statusPublished - Jan 1 1994
Externally publishedYes

Fingerprint

grinding
pyrite
Dissolution
dissolution
Oxygen
oxidation
Oxidation
oxygen
Acids
acid
Atoms
X-ray spectroscopy
X ray photoelectron spectroscopy
crystal
Crystals
effect
rate
Sulfur
diffraction
solubility

All Science Journal Classification (ASJC) codes

  • Geochemistry and Petrology

Cite this

Effect of grinding on the rate of oxidation of pyrite by oxygen in acid solutions. / Sasaki, Keiko.

In: Geochimica et Cosmochimica Acta, Vol. 58, No. 21, 01.01.1994, p. 4649-4655.

Research output: Contribution to journalArticle

@article{ad9b5131122e41af9a78b09793bc7be3,
title = "Effect of grinding on the rate of oxidation of pyrite by oxygen in acid solutions",
abstract = "Solubility of pyrite (FeS2) ground for different periods was investigated in acid solutions in air. In the initial dissolution, up to 50 h, the dissolution rate, r, was high, due to oxidized species such as FeSO4 formed by grinding. After 50 h, the surface of pyrite was exposed and the dissolution rate decreased. The formation and dissolution of oxidized species were confirmed by X-ray photoelectron spectroscopy, XPS. From the dissolution rates of Fe and S species, rFe and rS, for 50-200 h, it was found that pyrite dissolves nonstoichiometrically ( rS rFe < 2) and that grinding promotes the dissolution of sulfur species leading to the stoichiometric dissolution ( rS rFe = 2). The increase in rS can be explained by the displacement of S atoms in the crystal due to the grinding. The effective Debye-Waller parameter, Beff, depends on the displacement of constituent atoms in the crystal from their equilibrium positions and is measured from the diffraction intensities of X-rays. The parameter for S atoms in pyrite, Beff(S), increased by one or two orders of magnitude with increasing grinding time, tG, while that for the pyrite, Beff(FeS2), did not change markedly. It was established that rS is closely related to Beff(S). The phenomenon may be regarded as a type of mechanical activation.",
author = "Keiko Sasaki",
year = "1994",
month = "1",
day = "1",
doi = "10.1016/0016-7037(94)90197-X",
language = "English",
volume = "58",
pages = "4649--4655",
journal = "Geochmica et Cosmochimica Acta",
issn = "0016-7037",
publisher = "Elsevier Limited",
number = "21",

}

TY - JOUR

T1 - Effect of grinding on the rate of oxidation of pyrite by oxygen in acid solutions

AU - Sasaki, Keiko

PY - 1994/1/1

Y1 - 1994/1/1

N2 - Solubility of pyrite (FeS2) ground for different periods was investigated in acid solutions in air. In the initial dissolution, up to 50 h, the dissolution rate, r, was high, due to oxidized species such as FeSO4 formed by grinding. After 50 h, the surface of pyrite was exposed and the dissolution rate decreased. The formation and dissolution of oxidized species were confirmed by X-ray photoelectron spectroscopy, XPS. From the dissolution rates of Fe and S species, rFe and rS, for 50-200 h, it was found that pyrite dissolves nonstoichiometrically ( rS rFe < 2) and that grinding promotes the dissolution of sulfur species leading to the stoichiometric dissolution ( rS rFe = 2). The increase in rS can be explained by the displacement of S atoms in the crystal due to the grinding. The effective Debye-Waller parameter, Beff, depends on the displacement of constituent atoms in the crystal from their equilibrium positions and is measured from the diffraction intensities of X-rays. The parameter for S atoms in pyrite, Beff(S), increased by one or two orders of magnitude with increasing grinding time, tG, while that for the pyrite, Beff(FeS2), did not change markedly. It was established that rS is closely related to Beff(S). The phenomenon may be regarded as a type of mechanical activation.

AB - Solubility of pyrite (FeS2) ground for different periods was investigated in acid solutions in air. In the initial dissolution, up to 50 h, the dissolution rate, r, was high, due to oxidized species such as FeSO4 formed by grinding. After 50 h, the surface of pyrite was exposed and the dissolution rate decreased. The formation and dissolution of oxidized species were confirmed by X-ray photoelectron spectroscopy, XPS. From the dissolution rates of Fe and S species, rFe and rS, for 50-200 h, it was found that pyrite dissolves nonstoichiometrically ( rS rFe < 2) and that grinding promotes the dissolution of sulfur species leading to the stoichiometric dissolution ( rS rFe = 2). The increase in rS can be explained by the displacement of S atoms in the crystal due to the grinding. The effective Debye-Waller parameter, Beff, depends on the displacement of constituent atoms in the crystal from their equilibrium positions and is measured from the diffraction intensities of X-rays. The parameter for S atoms in pyrite, Beff(S), increased by one or two orders of magnitude with increasing grinding time, tG, while that for the pyrite, Beff(FeS2), did not change markedly. It was established that rS is closely related to Beff(S). The phenomenon may be regarded as a type of mechanical activation.

UR - http://www.scopus.com/inward/record.url?scp=0028608474&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0028608474&partnerID=8YFLogxK

U2 - 10.1016/0016-7037(94)90197-X

DO - 10.1016/0016-7037(94)90197-X

M3 - Article

AN - SCOPUS:0028608474

VL - 58

SP - 4649

EP - 4655

JO - Geochmica et Cosmochimica Acta

JF - Geochmica et Cosmochimica Acta

SN - 0016-7037

IS - 21

ER -