Abstract
Microstructures and formability of scandium and zirconium added Al-Mg-Mn alloy sheets with various heating conditions were examined to improve their mechanical properties. Formability of these samples were judged by the Lankford value, r-value. It was possible to fabricate mechanically balanced Al-Mg-Mn-Sc-Zr alloy with high hardness 76.2 Hv and with high formability with r = 1.2, by not only adding scandium and zirconium but also optimizing the heat treatment conditions.
| Original language | English |
|---|---|
| Pages (from-to) | 151-155 |
| Number of pages | 5 |
| Journal | Micron |
| Volume | 101 |
| DOIs | |
| Publication status | Published - Oct 2017 |
Fingerprint
All Science Journal Classification (ASJC) codes
- Structural Biology
- Materials Science(all)
- Physics and Astronomy(all)
- Cell Biology
Cite this
Effect of heat treatments on the microstructure and formability of Al–Mg–Mn–Sc–Zr alloy. / Miyake, Yudai; Sato, Yukio; Teranishi, Ryo; Kaneko, Kenji.
In: Micron, Vol. 101, 10.2017, p. 151-155.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - Effect of heat treatments on the microstructure and formability of Al–Mg–Mn–Sc–Zr alloy
AU - Miyake, Yudai
AU - Sato, Yukio
AU - Teranishi, Ryo
AU - Kaneko, Kenji
PY - 2017/10
Y1 - 2017/10
N2 - Microstructures and formability of scandium and zirconium added Al-Mg-Mn alloy sheets with various heating conditions were examined to improve their mechanical properties. Formability of these samples were judged by the Lankford value, r-value. It was possible to fabricate mechanically balanced Al-Mg-Mn-Sc-Zr alloy with high hardness 76.2 Hv and with high formability with r = 1.2, by not only adding scandium and zirconium but also optimizing the heat treatment conditions.
AB - Microstructures and formability of scandium and zirconium added Al-Mg-Mn alloy sheets with various heating conditions were examined to improve their mechanical properties. Formability of these samples were judged by the Lankford value, r-value. It was possible to fabricate mechanically balanced Al-Mg-Mn-Sc-Zr alloy with high hardness 76.2 Hv and with high formability with r = 1.2, by not only adding scandium and zirconium but also optimizing the heat treatment conditions.
UR - http://www.scopus.com/inward/record.url?scp=85024372017&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85024372017&partnerID=8YFLogxK
U2 - 10.1016/j.micron.2017.07.003
DO - 10.1016/j.micron.2017.07.003
M3 - Article
AN - SCOPUS:85024372017
VL - 101
SP - 151
EP - 155
JO - Micron
JF - Micron
SN - 0968-4328
ER -