Effect of local volume fraction of microporosity on tensile properties in Al-Si-Mg cast alloy

M. Kobayashi, Y. Dorce, H. Toda, H. Horikawa

Research output: Contribution to journalArticle

13 Citations (Scopus)

Abstract

Porosity in Al-Si-Mg cast alloys utilised in automotive parts affects directly products quality, i.e. mechanical properties. In this study, the effect of micropores on mechanical properties has been investigated by X-ray tomography from the viewpoint of clustering micropores. The local volume fraction (LVF) of porosity was introduced to analyse the effect of clustering micropores. The statistical Weibull method was also used in order to explain strength of the alloy tested. The fracture strain decreased drastically from 17 to 3% on an inverse parabolic relationship with increasing porosity. In the case of the specimens that contain the largest pore higher than 100 μm, the ultimate tensile strength decreases monotonically. It is found that the fracture surface passes through high LVF regions. The fracture strain obviously depends on the ratio of LVF higher than 10%. It is confirmed that the LVF, which represents unevenly distribution of micropores cluster, is one of important dominant factor for managing the mechanical properties in the Al-Si-Mg cast alloy.

Original languageEnglish
Pages (from-to)962-967
Number of pages6
JournalMaterials Science and Technology
Volume26
Issue number8
DOIs
Publication statusPublished - Aug 1 2010
Externally publishedYes

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this