Effect of solute copper on hardness and ductile-to-brittle transition in α-iron

Junaidi Syarif, Toshiyuki Hoshino, Toshihiro Tsuchiyama, Setsuo Takaki

    Research output: Contribution to journalArticlepeer-review

    18 Citations (Scopus)

    Abstract

    Effects of solute Cu on strengthening and ductile-to-brittle transition (DBT) of α-iron have studied for Fe-(0 to approximately 2)mass%Cu alloys. The Fe-Cu alloys exhibit massive ferritic transformation on water-quenching from solution treatment temperature. With increasing Cu content, the massive ferrite grains were refined and the hardness was raised. Effect of the solid solution hardening is predominant to the strengthening, but the refinement of massive ferrite grains does not affect so much. Charpy impact tests showed that Cu addition substantially lowers DBT temperature of α-iron. The embrittleness at low temperature was caused by the onset of cleavage cracks at ferrite grain boundaries where deformation twins impinged. Copper in solution suppresses the formation of deformation twins, and this results in the shift of DBT temperature to lower side.

    Original languageEnglish
    Pages (from-to)558-562
    Number of pages5
    JournalTetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
    Volume86
    Issue number8
    DOIs
    Publication statusPublished - 2000

    All Science Journal Classification (ASJC) codes

    • Condensed Matter Physics
    • Physical and Theoretical Chemistry
    • Metals and Alloys
    • Materials Chemistry

    Fingerprint

    Dive into the research topics of 'Effect of solute copper on hardness and ductile-to-brittle transition in α-iron'. Together they form a unique fingerprint.

    Cite this