Effect of spinning conditions on the shape of metallic wires produced by the in-rotating-water spinning method

Kyu Sang Cho, Hiroshi Takamatsu, Hiroshi Honda

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

Metal wires of Pb, Zn and Fe77.5Si7.5B15 were produced by the In-Rotating-Water Spinning Method. The effects of drum velocity (5.2∼8.5 m/s), jet ejection velocity (3.8∼11.4 m/s), incidence angle (30° and 60°) and nozzle diameter (0.1 and 0.2 mm) as well as the kind of metals on the formation of a wire were examined. Pb showed the best spinnability among the tested metals, although the cross section was relatively flat and marked ripples were formed on the wire surface when the incidence angle and the jet velocity were relatively large. A long, straight Fe77.5Si7.5B15 wire was produced when the jet velocity was a little higher than the drum velocity. A higher jet velocity was required for a smaller nozzle diameter dn. The produced Fe77.5Si7.5B15 wire had a smooth surface and a round cross-section. However, the wire showed a shape like a string of beads for dn=0.1 mm.

Original languageEnglish
Pages (from-to)189-196
Number of pages8
JournalNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
Volume62
Issue number2
DOIs
Publication statusPublished - Jan 1 1998

Fingerprint

metal spinning
wire
Wire
Water
water
drums
Metals
nozzles
Nozzles
incidence
metals
cross sections
ripples
ejection
beads
strings

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys
  • Materials Chemistry

Cite this

Effect of spinning conditions on the shape of metallic wires produced by the in-rotating-water spinning method. / Cho, Kyu Sang; Takamatsu, Hiroshi; Honda, Hiroshi.

In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, Vol. 62, No. 2, 01.01.1998, p. 189-196.

Research output: Contribution to journalArticle

@article{b110fa7b9fb94873a65f62323719b984,
title = "Effect of spinning conditions on the shape of metallic wires produced by the in-rotating-water spinning method",
abstract = "Metal wires of Pb, Zn and Fe77.5Si7.5B15 were produced by the In-Rotating-Water Spinning Method. The effects of drum velocity (5.2∼8.5 m/s), jet ejection velocity (3.8∼11.4 m/s), incidence angle (30° and 60°) and nozzle diameter (0.1 and 0.2 mm) as well as the kind of metals on the formation of a wire were examined. Pb showed the best spinnability among the tested metals, although the cross section was relatively flat and marked ripples were formed on the wire surface when the incidence angle and the jet velocity were relatively large. A long, straight Fe77.5Si7.5B15 wire was produced when the jet velocity was a little higher than the drum velocity. A higher jet velocity was required for a smaller nozzle diameter dn. The produced Fe77.5Si7.5B15 wire had a smooth surface and a round cross-section. However, the wire showed a shape like a string of beads for dn=0.1 mm.",
author = "Cho, {Kyu Sang} and Hiroshi Takamatsu and Hiroshi Honda",
year = "1998",
month = "1",
day = "1",
doi = "10.2320/jinstmet1952.62.2_189",
language = "English",
volume = "62",
pages = "189--196",
journal = "Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals",
issn = "0021-4876",
publisher = "公益社団法人 日本金属学会",
number = "2",

}

TY - JOUR

T1 - Effect of spinning conditions on the shape of metallic wires produced by the in-rotating-water spinning method

AU - Cho, Kyu Sang

AU - Takamatsu, Hiroshi

AU - Honda, Hiroshi

PY - 1998/1/1

Y1 - 1998/1/1

N2 - Metal wires of Pb, Zn and Fe77.5Si7.5B15 were produced by the In-Rotating-Water Spinning Method. The effects of drum velocity (5.2∼8.5 m/s), jet ejection velocity (3.8∼11.4 m/s), incidence angle (30° and 60°) and nozzle diameter (0.1 and 0.2 mm) as well as the kind of metals on the formation of a wire were examined. Pb showed the best spinnability among the tested metals, although the cross section was relatively flat and marked ripples were formed on the wire surface when the incidence angle and the jet velocity were relatively large. A long, straight Fe77.5Si7.5B15 wire was produced when the jet velocity was a little higher than the drum velocity. A higher jet velocity was required for a smaller nozzle diameter dn. The produced Fe77.5Si7.5B15 wire had a smooth surface and a round cross-section. However, the wire showed a shape like a string of beads for dn=0.1 mm.

AB - Metal wires of Pb, Zn and Fe77.5Si7.5B15 were produced by the In-Rotating-Water Spinning Method. The effects of drum velocity (5.2∼8.5 m/s), jet ejection velocity (3.8∼11.4 m/s), incidence angle (30° and 60°) and nozzle diameter (0.1 and 0.2 mm) as well as the kind of metals on the formation of a wire were examined. Pb showed the best spinnability among the tested metals, although the cross section was relatively flat and marked ripples were formed on the wire surface when the incidence angle and the jet velocity were relatively large. A long, straight Fe77.5Si7.5B15 wire was produced when the jet velocity was a little higher than the drum velocity. A higher jet velocity was required for a smaller nozzle diameter dn. The produced Fe77.5Si7.5B15 wire had a smooth surface and a round cross-section. However, the wire showed a shape like a string of beads for dn=0.1 mm.

UR - http://www.scopus.com/inward/record.url?scp=0031997808&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0031997808&partnerID=8YFLogxK

U2 - 10.2320/jinstmet1952.62.2_189

DO - 10.2320/jinstmet1952.62.2_189

M3 - Article

VL - 62

SP - 189

EP - 196

JO - Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals

JF - Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals

SN - 0021-4876

IS - 2

ER -