Effect of tempering conditions on inhomogeneous deformation behavior of ferrite-martensite dual-phase steels

Hidekazu Minami, Kyouhei Nakayama, Tatsuya Morikawa, Kenji Higashida, Yuki Toji, Kohei Hasegawa

Research output: Contribution to journalArticle

20 Citations (Scopus)

Abstract

Inhomogeneous deformation in DP steel has been investigated by SEM-EBSD method and high-precision markers drawn by electron beam lithography. Particular emphasis is laid on the effects of initial hardness of martensite on the development of inhomogeneity in ferrite during tensile deformation. The hardness of each phase in DP steels has been examined using a Berkovich-type indenter. Difference of the hardness between ferrite and martensite in the specimen tempered at 423K was larger than that tempered at 673K. Changes of local orientation obtained by SEM-EBSD method inside the ferrite in the steel tempered at 423K was more noticeable than that tempered at 673K. In addition, we employed a high-precision marking method using electron beam lithography in order to measure the local displacement. Not only the equivalent plastic strain in ferrite but also the one in martensite were obtained by using the method due to tensile deformation. It is clarified that the hardness of martensite effects the development of deformation inhomogeneity in both of ferrite and martensite. On the basis of results, the influence of the characteristic of deformation inhomogeneity on the mechanical property of the DP steels is discussed.

Original languageEnglish
Pages (from-to)493-500
Number of pages8
JournalTetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
Volume97
Issue number9
DOIs
Publication statusPublished - Oct 14 2011

Fingerprint

tempering
Steel
Tempering
martensite
Martensite
Ferrite
ferrites
steels
hardness
Hardness
tensile deformation
inhomogeneity
Electron beam lithography
lithography
electron beams
Scanning electron microscopy
scanning electron microscopy
markers
marking
Plastic deformation

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Physical and Theoretical Chemistry
  • Metals and Alloys
  • Materials Chemistry

Cite this

Effect of tempering conditions on inhomogeneous deformation behavior of ferrite-martensite dual-phase steels. / Minami, Hidekazu; Nakayama, Kyouhei; Morikawa, Tatsuya; Higashida, Kenji; Toji, Yuki; Hasegawa, Kohei.

In: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, Vol. 97, No. 9, 14.10.2011, p. 493-500.

Research output: Contribution to journalArticle

Minami, Hidekazu ; Nakayama, Kyouhei ; Morikawa, Tatsuya ; Higashida, Kenji ; Toji, Yuki ; Hasegawa, Kohei. / Effect of tempering conditions on inhomogeneous deformation behavior of ferrite-martensite dual-phase steels. In: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 2011 ; Vol. 97, No. 9. pp. 493-500.
@article{93be2e28915f4335a234fc035a927a7b,
title = "Effect of tempering conditions on inhomogeneous deformation behavior of ferrite-martensite dual-phase steels",
abstract = "Inhomogeneous deformation in DP steel has been investigated by SEM-EBSD method and high-precision markers drawn by electron beam lithography. Particular emphasis is laid on the effects of initial hardness of martensite on the development of inhomogeneity in ferrite during tensile deformation. The hardness of each phase in DP steels has been examined using a Berkovich-type indenter. Difference of the hardness between ferrite and martensite in the specimen tempered at 423K was larger than that tempered at 673K. Changes of local orientation obtained by SEM-EBSD method inside the ferrite in the steel tempered at 423K was more noticeable than that tempered at 673K. In addition, we employed a high-precision marking method using electron beam lithography in order to measure the local displacement. Not only the equivalent plastic strain in ferrite but also the one in martensite were obtained by using the method due to tensile deformation. It is clarified that the hardness of martensite effects the development of deformation inhomogeneity in both of ferrite and martensite. On the basis of results, the influence of the characteristic of deformation inhomogeneity on the mechanical property of the DP steels is discussed.",
author = "Hidekazu Minami and Kyouhei Nakayama and Tatsuya Morikawa and Kenji Higashida and Yuki Toji and Kohei Hasegawa",
year = "2011",
month = "10",
day = "14",
doi = "10.2355/tetsutohagane.97.493",
language = "English",
volume = "97",
pages = "493--500",
journal = "Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan",
issn = "0021-1575",
publisher = "一般社団法人 日本鉄鋼協会",
number = "9",

}

TY - JOUR

T1 - Effect of tempering conditions on inhomogeneous deformation behavior of ferrite-martensite dual-phase steels

AU - Minami, Hidekazu

AU - Nakayama, Kyouhei

AU - Morikawa, Tatsuya

AU - Higashida, Kenji

AU - Toji, Yuki

AU - Hasegawa, Kohei

PY - 2011/10/14

Y1 - 2011/10/14

N2 - Inhomogeneous deformation in DP steel has been investigated by SEM-EBSD method and high-precision markers drawn by electron beam lithography. Particular emphasis is laid on the effects of initial hardness of martensite on the development of inhomogeneity in ferrite during tensile deformation. The hardness of each phase in DP steels has been examined using a Berkovich-type indenter. Difference of the hardness between ferrite and martensite in the specimen tempered at 423K was larger than that tempered at 673K. Changes of local orientation obtained by SEM-EBSD method inside the ferrite in the steel tempered at 423K was more noticeable than that tempered at 673K. In addition, we employed a high-precision marking method using electron beam lithography in order to measure the local displacement. Not only the equivalent plastic strain in ferrite but also the one in martensite were obtained by using the method due to tensile deformation. It is clarified that the hardness of martensite effects the development of deformation inhomogeneity in both of ferrite and martensite. On the basis of results, the influence of the characteristic of deformation inhomogeneity on the mechanical property of the DP steels is discussed.

AB - Inhomogeneous deformation in DP steel has been investigated by SEM-EBSD method and high-precision markers drawn by electron beam lithography. Particular emphasis is laid on the effects of initial hardness of martensite on the development of inhomogeneity in ferrite during tensile deformation. The hardness of each phase in DP steels has been examined using a Berkovich-type indenter. Difference of the hardness between ferrite and martensite in the specimen tempered at 423K was larger than that tempered at 673K. Changes of local orientation obtained by SEM-EBSD method inside the ferrite in the steel tempered at 423K was more noticeable than that tempered at 673K. In addition, we employed a high-precision marking method using electron beam lithography in order to measure the local displacement. Not only the equivalent plastic strain in ferrite but also the one in martensite were obtained by using the method due to tensile deformation. It is clarified that the hardness of martensite effects the development of deformation inhomogeneity in both of ferrite and martensite. On the basis of results, the influence of the characteristic of deformation inhomogeneity on the mechanical property of the DP steels is discussed.

UR - http://www.scopus.com/inward/record.url?scp=80053902680&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80053902680&partnerID=8YFLogxK

U2 - 10.2355/tetsutohagane.97.493

DO - 10.2355/tetsutohagane.97.493

M3 - Article

VL - 97

SP - 493

EP - 500

JO - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

JF - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

SN - 0021-1575

IS - 9

ER -