Effects of internal hydrogen on fatigue strength of commercially pure titanium

Hideaki Nishikawa, Yasuji Oda, Hiroshi Noguchi

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Commercially Pure Titanium (CP-Ti) usually contains a few tens of ppm hydrogen. In order to investigate the effect of such internal hydrogen on the fatigue characteristics, rotating bending fatigue tests were carried out on two kinds of specimen with different hydrogen contents: one contains 34 ppm but the other 3 ppm. The amount of internal hydrogen was controlled by changing the annealing conditions. The fatigue process was successively observed by a replication technique. The higher hydrogen content specimen showed a longer fatigue life, longer crack initiation life and higher fatigue limit than those of the lower hydrogen specimen. No specimen showed any particular fatigue crack growth behavior related to hydrogen content, whereas the crack initiation behavior differed somewhat. The fatigue-crack initiation site of the higher hydrogen content specimen with a longer fatigue life preferred the interior of a grain. On the other hand, that of the lower hydrogen specimen preferred the neighborhood of a grain boundary.

Original languageEnglish
Title of host publication17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures
Pages1289-1296
Number of pages8
Volume2
Publication statusPublished - 2008
Event17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures, ECF17 - Brno, Czech Republic
Duration: Sep 2 2008Sep 5 2008

Other

Other17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures, ECF17
CountryCzech Republic
CityBrno
Period9/2/089/5/08

Fingerprint

Titanium
Hydrogen
Fatigue of materials
Crack initiation
Fatigue strength
Bending (deformation)
Fatigue crack propagation
Grain boundaries
Annealing

All Science Journal Classification (ASJC) codes

  • Civil and Structural Engineering

Cite this

Nishikawa, H., Oda, Y., & Noguchi, H. (2008). Effects of internal hydrogen on fatigue strength of commercially pure titanium. In 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures (Vol. 2, pp. 1289-1296)

Effects of internal hydrogen on fatigue strength of commercially pure titanium. / Nishikawa, Hideaki; Oda, Yasuji; Noguchi, Hiroshi.

17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. Vol. 2 2008. p. 1289-1296.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nishikawa, H, Oda, Y & Noguchi, H 2008, Effects of internal hydrogen on fatigue strength of commercially pure titanium. in 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. vol. 2, pp. 1289-1296, 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures, ECF17, Brno, Czech Republic, 9/2/08.
Nishikawa H, Oda Y, Noguchi H. Effects of internal hydrogen on fatigue strength of commercially pure titanium. In 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. Vol. 2. 2008. p. 1289-1296
Nishikawa, Hideaki ; Oda, Yasuji ; Noguchi, Hiroshi. / Effects of internal hydrogen on fatigue strength of commercially pure titanium. 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. Vol. 2 2008. pp. 1289-1296
@inproceedings{cc2f9338e3534f7e92bba8dfa7df08ba,
title = "Effects of internal hydrogen on fatigue strength of commercially pure titanium",
abstract = "Commercially Pure Titanium (CP-Ti) usually contains a few tens of ppm hydrogen. In order to investigate the effect of such internal hydrogen on the fatigue characteristics, rotating bending fatigue tests were carried out on two kinds of specimen with different hydrogen contents: one contains 34 ppm but the other 3 ppm. The amount of internal hydrogen was controlled by changing the annealing conditions. The fatigue process was successively observed by a replication technique. The higher hydrogen content specimen showed a longer fatigue life, longer crack initiation life and higher fatigue limit than those of the lower hydrogen specimen. No specimen showed any particular fatigue crack growth behavior related to hydrogen content, whereas the crack initiation behavior differed somewhat. The fatigue-crack initiation site of the higher hydrogen content specimen with a longer fatigue life preferred the interior of a grain. On the other hand, that of the lower hydrogen specimen preferred the neighborhood of a grain boundary.",
author = "Hideaki Nishikawa and Yasuji Oda and Hiroshi Noguchi",
year = "2008",
language = "English",
isbn = "9781617823190",
volume = "2",
pages = "1289--1296",
booktitle = "17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures",

}

TY - GEN

T1 - Effects of internal hydrogen on fatigue strength of commercially pure titanium

AU - Nishikawa, Hideaki

AU - Oda, Yasuji

AU - Noguchi, Hiroshi

PY - 2008

Y1 - 2008

N2 - Commercially Pure Titanium (CP-Ti) usually contains a few tens of ppm hydrogen. In order to investigate the effect of such internal hydrogen on the fatigue characteristics, rotating bending fatigue tests were carried out on two kinds of specimen with different hydrogen contents: one contains 34 ppm but the other 3 ppm. The amount of internal hydrogen was controlled by changing the annealing conditions. The fatigue process was successively observed by a replication technique. The higher hydrogen content specimen showed a longer fatigue life, longer crack initiation life and higher fatigue limit than those of the lower hydrogen specimen. No specimen showed any particular fatigue crack growth behavior related to hydrogen content, whereas the crack initiation behavior differed somewhat. The fatigue-crack initiation site of the higher hydrogen content specimen with a longer fatigue life preferred the interior of a grain. On the other hand, that of the lower hydrogen specimen preferred the neighborhood of a grain boundary.

AB - Commercially Pure Titanium (CP-Ti) usually contains a few tens of ppm hydrogen. In order to investigate the effect of such internal hydrogen on the fatigue characteristics, rotating bending fatigue tests were carried out on two kinds of specimen with different hydrogen contents: one contains 34 ppm but the other 3 ppm. The amount of internal hydrogen was controlled by changing the annealing conditions. The fatigue process was successively observed by a replication technique. The higher hydrogen content specimen showed a longer fatigue life, longer crack initiation life and higher fatigue limit than those of the lower hydrogen specimen. No specimen showed any particular fatigue crack growth behavior related to hydrogen content, whereas the crack initiation behavior differed somewhat. The fatigue-crack initiation site of the higher hydrogen content specimen with a longer fatigue life preferred the interior of a grain. On the other hand, that of the lower hydrogen specimen preferred the neighborhood of a grain boundary.

UR - http://www.scopus.com/inward/record.url?scp=84866123271&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84866123271&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:84866123271

SN - 9781617823190

VL - 2

SP - 1289

EP - 1296

BT - 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures

ER -