Effects of junction geometry on performance of flux-flow type josephson oscillator

K. Yoshida; T. Nagatsuma; K. Sueoka; K. Enpuku; F. Irie

doi:10.1109/TMAG.1985.1063752

Effects of junction geometry on performance of flux-flow type josephson oscillator

K. Yoshida, T. Nagatsuma, K. Sueoka, K. Enpuku, F. Irie

Superconductive Systems Engineering Laboratory

Research output: Contribution to journal › Article › peer-review

11 Citations (Scopus)

Abstract

Theoretical and experimental studies have been made of the effects of junction geometry on the performance of the flux-flow type Josephson oscillator. It is shown theoretically that the height and the slope of the current steps appearing in dc I-V curves of the junction, which determine the available power and the radiation linewidth of the oscillator, respectively, are dependent strongly upon self fields in the junction. In order to study the effects of junction geometries on the self fields, computer simulation and experiments have been carries out for an in-line junction, an overlap junction and an overlap junction with a small projection on one side. The best performance is obtained for the overlap junction with a moderate projection on side as expected theoretically.

Original language	English
Pages (from-to)	899-902
Number of pages	4
Journal	IEEE Transactions on Magnetics
Volume	21
Issue number	2
DOIs	https://doi.org/10.1109/TMAG.1985.1063752
Publication status	Published - Mar 1985

All Science Journal Classification (ASJC) codes

Electronic, Optical and Magnetic Materials
Electrical and Electronic Engineering

Access to Document

10.1109/TMAG.1985.1063752

Cite this

@article{8b2af9f636dd4204b7b68f68a10fdcd5,

title = "Effects of junction geometry on performance of flux-flow type josephson oscillator",

abstract = "Theoretical and experimental studies have been made of the effects of junction geometry on the performance of the flux-flow type Josephson oscillator. It is shown theoretically that the height and the slope of the current steps appearing in dc I-V curves of the junction, which determine the available power and the radiation linewidth of the oscillator, respectively, are dependent strongly upon self fields in the junction. In order to study the effects of junction geometries on the self fields, computer simulation and experiments have been carries out for an in-line junction, an overlap junction and an overlap junction with a small projection on one side. The best performance is obtained for the overlap junction with a moderate projection on side as expected theoretically.",

author = "K. Yoshida and T. Nagatsuma and K. Sueoka and K. Enpuku and F. Irie",

year = "1985",

month = mar,

doi = "10.1109/TMAG.1985.1063752",

language = "English",

volume = "21",

pages = "899--902",

journal = "IEEE Transactions on Magnetics",

issn = "0018-9464",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "2",

}

TY - JOUR

T1 - Effects of junction geometry on performance of flux-flow type josephson oscillator

AU - Yoshida, K.

AU - Nagatsuma, T.

AU - Sueoka, K.

AU - Enpuku, K.

AU - Irie, F.

PY - 1985/3

Y1 - 1985/3

N2 - Theoretical and experimental studies have been made of the effects of junction geometry on the performance of the flux-flow type Josephson oscillator. It is shown theoretically that the height and the slope of the current steps appearing in dc I-V curves of the junction, which determine the available power and the radiation linewidth of the oscillator, respectively, are dependent strongly upon self fields in the junction. In order to study the effects of junction geometries on the self fields, computer simulation and experiments have been carries out for an in-line junction, an overlap junction and an overlap junction with a small projection on one side. The best performance is obtained for the overlap junction with a moderate projection on side as expected theoretically.

AB - Theoretical and experimental studies have been made of the effects of junction geometry on the performance of the flux-flow type Josephson oscillator. It is shown theoretically that the height and the slope of the current steps appearing in dc I-V curves of the junction, which determine the available power and the radiation linewidth of the oscillator, respectively, are dependent strongly upon self fields in the junction. In order to study the effects of junction geometries on the self fields, computer simulation and experiments have been carries out for an in-line junction, an overlap junction and an overlap junction with a small projection on one side. The best performance is obtained for the overlap junction with a moderate projection on side as expected theoretically.

UR - http://www.scopus.com/inward/record.url?scp=84864941803&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84864941803&partnerID=8YFLogxK

U2 - 10.1109/TMAG.1985.1063752

DO - 10.1109/TMAG.1985.1063752

M3 - Article

AN - SCOPUS:84864941803

SN - 0018-9464

VL - 21

SP - 899

EP - 902

JO - IEEE Transactions on Magnetics

JF - IEEE Transactions on Magnetics

IS - 2

ER -

Effects of junction geometry on performance of flux-flow type josephson oscillator

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this