Einfluss von Nitrieren-Abschrecken und Aufkohlen-Abschrecken auf die Verschleißeigenschallen von industriellem Reineisen

Translated title of the contribution: Effects of nitriding-quenching and carburizingquenching on wear properties of industrial pure iron

Masatoshi Aramaki, M. Kozin, K. Yoshida, O. Furukimi

Research output: Contribution to specialist publicationArticle

Abstract

The wear properties of industrial pure iron treated by nitriding-quenching and carburizing-quenching were investigated. Both the nitrogen martensite and carbon martensite produced by each treatment exhibited the same high degree of wear resistance. The results of sliding tests showed that the nano-indentation hardness near the surfaces of both samples had increased. The surface hardening of the nitrogen martensite was more noticeable than that of the carbon martensite. EBSD analysis revealed that plastic strain had been induced on a relatively large scale (around 20 μ m) aer sliding in the case of the nitrogen martensite. It was found that the high wear resistance of the nitrogen martensite led to strain hardening through the effect of the load applied in the sliding test.

Original languageGerman
Pages131-143
Number of pages13
Volume73
No.3
Specialist publicationHTM - Journal of Heat Treatment and Materials
DOIs
Publication statusPublished - Jun 1 2018

Fingerprint

Nitriding
Martensite
Quenching
Iron
Wear of materials
Nitrogen
Wear resistance
Carbon
Carburizing
Nanoindentation
Strain hardening
Hardening
Plastic deformation
Hardness

All Science Journal Classification (ASJC) codes

  • Industrial and Manufacturing Engineering
  • Metals and Alloys
  • Materials Chemistry

Cite this

Einfluss von Nitrieren-Abschrecken und Aufkohlen-Abschrecken auf die Verschleißeigenschallen von industriellem Reineisen. / Aramaki, Masatoshi; Kozin, M.; Yoshida, K.; Furukimi, O.

In: HTM - Journal of Heat Treatment and Materials, Vol. 73, No. 3, 01.06.2018, p. 131-143.

Research output: Contribution to specialist publicationArticle

@misc{0d7dcdfc121145a29125b901da3a45cb,
title = "Einfluss von Nitrieren-Abschrecken und Aufkohlen-Abschrecken auf die Verschlei{\ss}eigenschallen von industriellem Reineisen",
abstract = "The wear properties of industrial pure iron treated by nitriding-quenching and carburizing-quenching were investigated. Both the nitrogen martensite and carbon martensite produced by each treatment exhibited the same high degree of wear resistance. The results of sliding tests showed that the nano-indentation hardness near the surfaces of both samples had increased. The surface hardening of the nitrogen martensite was more noticeable than that of the carbon martensite. EBSD analysis revealed that plastic strain had been induced on a relatively large scale (around 20 μ m) aer sliding in the case of the nitrogen martensite. It was found that the high wear resistance of the nitrogen martensite led to strain hardening through the effect of the load applied in the sliding test.",
author = "Masatoshi Aramaki and M. Kozin and K. Yoshida and O. Furukimi",
year = "2018",
month = "6",
day = "1",
doi = "10.3139/105.110346",
language = "ドイツ語",
volume = "73",
pages = "131--143",
journal = "HTM - Journal of Heat Treatment and Materials",
issn = "1867-2493",
publisher = "Carl Hanser Verlag GmbH & Co. KG",

}

TY - GEN

T1 - Einfluss von Nitrieren-Abschrecken und Aufkohlen-Abschrecken auf die Verschleißeigenschallen von industriellem Reineisen

AU - Aramaki, Masatoshi

AU - Kozin, M.

AU - Yoshida, K.

AU - Furukimi, O.

PY - 2018/6/1

Y1 - 2018/6/1

N2 - The wear properties of industrial pure iron treated by nitriding-quenching and carburizing-quenching were investigated. Both the nitrogen martensite and carbon martensite produced by each treatment exhibited the same high degree of wear resistance. The results of sliding tests showed that the nano-indentation hardness near the surfaces of both samples had increased. The surface hardening of the nitrogen martensite was more noticeable than that of the carbon martensite. EBSD analysis revealed that plastic strain had been induced on a relatively large scale (around 20 μ m) aer sliding in the case of the nitrogen martensite. It was found that the high wear resistance of the nitrogen martensite led to strain hardening through the effect of the load applied in the sliding test.

AB - The wear properties of industrial pure iron treated by nitriding-quenching and carburizing-quenching were investigated. Both the nitrogen martensite and carbon martensite produced by each treatment exhibited the same high degree of wear resistance. The results of sliding tests showed that the nano-indentation hardness near the surfaces of both samples had increased. The surface hardening of the nitrogen martensite was more noticeable than that of the carbon martensite. EBSD analysis revealed that plastic strain had been induced on a relatively large scale (around 20 μ m) aer sliding in the case of the nitrogen martensite. It was found that the high wear resistance of the nitrogen martensite led to strain hardening through the effect of the load applied in the sliding test.

UR - http://www.scopus.com/inward/record.url?scp=85048776326&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85048776326&partnerID=8YFLogxK

U2 - 10.3139/105.110346

DO - 10.3139/105.110346

M3 - 記事

AN - SCOPUS:85048776326

VL - 73

SP - 131

EP - 143

JO - HTM - Journal of Heat Treatment and Materials

JF - HTM - Journal of Heat Treatment and Materials

SN - 1867-2493

ER -