Effects of sliding conditions on wear by repeated contact of two asperities

Jaewook Kang, Joichi Sugimura, Yuji Yamamoto

Research output: Contribution to journalArticle

Abstract

Effects of sliding conditions on wear of ductile metals under repeated sliding of two diamond pyramidal asperities along close tracks were studied by using a dual-pin/disk test rig. Brass worn by cutting both with one asperity and with two asperities, whereby wear increased linearly with sliding cycles and showed little dependence on the distance between the two grooves. Aluminum and copper exhibited characteristic wear behavior due to plastic deformation of the central ridge between neighboring grooves, which was not observed in the sliding of one asperity. Progressive plastic deformation on the ridge surface gave rise to an extrusion at its tip, which eventually detached from the ridge to form elongated wear particles. In this deformation-oriented type of wear, larger distance between the grooves caused deeper grooves but less wear after fifty cycles of sliding, and the amount of wear approached a certain limit as the sliding cycles increased. A simple model of track geometry that determined the upper limit of wear by plastic deformation was proposed, with which dependence of the wear amount on the groove distance and normal load was explained.

Original languageEnglish
Pages (from-to)412-419
Number of pages8
JournalToraibarojisuto/Journal of Japanese Society of Tribologists
Volume47
Issue number5
Publication statusPublished - Dec 1 2002

Fingerprint

sliding
Wear of materials
grooves
plastic deformation
ridges
Plastic deformation
cycles
Diamond
brasses
Brass
Aluminum
Extrusion
Copper
Diamonds
Metals
diamonds
aluminum
copper
Geometry
geometry

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Mechanical Engineering
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Materials Chemistry

Cite this

Effects of sliding conditions on wear by repeated contact of two asperities. / Kang, Jaewook; Sugimura, Joichi; Yamamoto, Yuji.

In: Toraibarojisuto/Journal of Japanese Society of Tribologists, Vol. 47, No. 5, 01.12.2002, p. 412-419.

Research output: Contribution to journalArticle

@article{a0060024f8f34645a4f4f6d38bfc5357,
title = "Effects of sliding conditions on wear by repeated contact of two asperities",
abstract = "Effects of sliding conditions on wear of ductile metals under repeated sliding of two diamond pyramidal asperities along close tracks were studied by using a dual-pin/disk test rig. Brass worn by cutting both with one asperity and with two asperities, whereby wear increased linearly with sliding cycles and showed little dependence on the distance between the two grooves. Aluminum and copper exhibited characteristic wear behavior due to plastic deformation of the central ridge between neighboring grooves, which was not observed in the sliding of one asperity. Progressive plastic deformation on the ridge surface gave rise to an extrusion at its tip, which eventually detached from the ridge to form elongated wear particles. In this deformation-oriented type of wear, larger distance between the grooves caused deeper grooves but less wear after fifty cycles of sliding, and the amount of wear approached a certain limit as the sliding cycles increased. A simple model of track geometry that determined the upper limit of wear by plastic deformation was proposed, with which dependence of the wear amount on the groove distance and normal load was explained.",
author = "Jaewook Kang and Joichi Sugimura and Yuji Yamamoto",
year = "2002",
month = "12",
day = "1",
language = "English",
volume = "47",
pages = "412--419",
journal = "Toraibarojisuto/Journal of Japanese Society of Tribologists",
issn = "0915-1168",
publisher = "Japanese Society of Tribologists",
number = "5",

}

TY - JOUR

T1 - Effects of sliding conditions on wear by repeated contact of two asperities

AU - Kang, Jaewook

AU - Sugimura, Joichi

AU - Yamamoto, Yuji

PY - 2002/12/1

Y1 - 2002/12/1

N2 - Effects of sliding conditions on wear of ductile metals under repeated sliding of two diamond pyramidal asperities along close tracks were studied by using a dual-pin/disk test rig. Brass worn by cutting both with one asperity and with two asperities, whereby wear increased linearly with sliding cycles and showed little dependence on the distance between the two grooves. Aluminum and copper exhibited characteristic wear behavior due to plastic deformation of the central ridge between neighboring grooves, which was not observed in the sliding of one asperity. Progressive plastic deformation on the ridge surface gave rise to an extrusion at its tip, which eventually detached from the ridge to form elongated wear particles. In this deformation-oriented type of wear, larger distance between the grooves caused deeper grooves but less wear after fifty cycles of sliding, and the amount of wear approached a certain limit as the sliding cycles increased. A simple model of track geometry that determined the upper limit of wear by plastic deformation was proposed, with which dependence of the wear amount on the groove distance and normal load was explained.

AB - Effects of sliding conditions on wear of ductile metals under repeated sliding of two diamond pyramidal asperities along close tracks were studied by using a dual-pin/disk test rig. Brass worn by cutting both with one asperity and with two asperities, whereby wear increased linearly with sliding cycles and showed little dependence on the distance between the two grooves. Aluminum and copper exhibited characteristic wear behavior due to plastic deformation of the central ridge between neighboring grooves, which was not observed in the sliding of one asperity. Progressive plastic deformation on the ridge surface gave rise to an extrusion at its tip, which eventually detached from the ridge to form elongated wear particles. In this deformation-oriented type of wear, larger distance between the grooves caused deeper grooves but less wear after fifty cycles of sliding, and the amount of wear approached a certain limit as the sliding cycles increased. A simple model of track geometry that determined the upper limit of wear by plastic deformation was proposed, with which dependence of the wear amount on the groove distance and normal load was explained.

UR - http://www.scopus.com/inward/record.url?scp=0042882507&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0042882507&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0042882507

VL - 47

SP - 412

EP - 419

JO - Toraibarojisuto/Journal of Japanese Society of Tribologists

JF - Toraibarojisuto/Journal of Japanese Society of Tribologists

SN - 0915-1168

IS - 5

ER -