Effects of the surface state of plastics on adhesive strength in electroless plating

S. Sugihara, S. Okada, H. Ohtsuka, J. Yamaki

Research output: Contribution to journalArticlepeer-review

5 Citations (Scopus)

Abstract

Adhesive resins with high adhesive strength and high heat resistance have been studied in developing a novel iron-core printed circuit board with high mechanical strength and high heat radiation capability. A reticular pattern formed on the surface of an adhesive resin composed of nitrile rubber, phenolic resin, and epoxy resin. It caused blisters in the plating or reduced the heat resistance of the printed board. This pattern was formed as a result of phase separation of epoxy resin or phenolic resin from the nitrile rubber. Using a high-molecular-weight epoxy resin led to high adhesive strength and high heat resistance, without phase separation. The relationships between the composition of adhesive resins and their characteristics were discussed on the basis of the state of their surface after being roughened by chemical etching.

Original languageEnglish
Pages (from-to)1751-1758
Number of pages8
JournalJournal of Applied Polymer Science
Volume59
Issue number11
DOIs
Publication statusPublished - Mar 14 1996
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Chemistry(all)
  • Surfaces, Coatings and Films
  • Polymers and Plastics
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Effects of the surface state of plastics on adhesive strength in electroless plating'. Together they form a unique fingerprint.

Cite this