Electropolishing conditions for trace analysis of B19′ martensite in Ti-Ni shape memory alloys

T. Nishiura, K. Hayashi, M. Nishida

Research output: Contribution to journalArticlepeer-review

4 Citations (Scopus)

Abstract

The electropolishing conditions of thin foil specimens for the crystallographic analysis of the B19′ martensite in the Ti-Ni shape memory alloy have been investigated. The specimens are electropolished between the martensite-start and the martensite-finish temperatures in three electrolytes; H2SO4-CH3OH, HNO3-CH3OH and HClO4-(CH3CO)2O. The traces of the martensite morphology are clearly retained on the foil surface polished in the HNO3-CH3OH solution. The microreversibility of the martensite morphology during in situ cooling experiments in the transmission election microscope is examined in the obtained foil. No microreversibility is observed in the foil. In order to confirm the validity of the residual traces for the crystallographic investigation of the martensite morphology, a preliminary analysis based on the lattice correspondence between the B2 and B19′ structures is carried out.

Original languageEnglish
Pages (from-to)446-451
Number of pages6
JournalMaterials Science and Engineering A
Volume481-482
Issue number1-2 C
DOIs
Publication statusPublished - May 25 2008
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Electropolishing conditions for trace analysis of B19′ martensite in Ti-Ni shape memory alloys'. Together they form a unique fingerprint.

Cite this