Electrostatic inkjet head fabricated by anodization of Si

Yuji Ishida; Kazunari Matsuzaki; Akiyoshi Baba; Tanemasa Asano

doi:10.1109/IMNC.2003.1268766

Electrostatic inkjet head fabricated by anodization of Si

Yuji Ishida, Kazunari Matsuzaki, Akiyoshi Baba, Tanemasa Asano

Center for Japan-Egypt Cooperation in Science and Technology（E-JUST Center）

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

4 Citations (Scopus)

Abstract

In this paper, we successfully fabricated the cone-shaped electrostatic inkjet head using anodization and demonstrated the droplet ejection from this head. The dot size was about 50 /spl mu/m in diameter and this value is much larger than that of expected. Optimization of head shape and driving method will enable us to obtain fine droplets.

Original language	English
Title of host publication	Digest of Papers - Microprocesses and Nanotechnology 2003 - 2003 International Microprocesses and Nanotechnology Conference, MNC 2003
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	302-303
Number of pages	2
ISBN (Electronic)	4891140402, 9784891140403
DOIs	https://doi.org/10.1109/IMNC.2003.1268766
Publication status	Published - Jan 1 2003
Event	International Microprocesses and Nanotechnology Conference, MNC 2003 - Tokyo, Japan Duration: Oct 29 2003 → Oct 31 2003

Other

Other	International Microprocesses and Nanotechnology Conference, MNC 2003
Country/Territory	Japan
City	Tokyo
Period	10/29/03 → 10/31/03

All Science Journal Classification (ASJC) codes

Hardware and Architecture
Electrical and Electronic Engineering

Access to Document

10.1109/IMNC.2003.1268766

Cite this

Ishida, Y., Matsuzaki, K., Baba, A., & Asano, T. (2003). Electrostatic inkjet head fabricated by anodization of Si. In Digest of Papers - Microprocesses and Nanotechnology 2003 - 2003 International Microprocesses and Nanotechnology Conference, MNC 2003 (pp. 302-303). [1268766] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/IMNC.2003.1268766

Electrostatic inkjet head fabricated by anodization of Si. / Ishida, Yuji; Matsuzaki, Kazunari; Baba, Akiyoshi et al.

Digest of Papers - Microprocesses and Nanotechnology 2003 - 2003 International Microprocesses and Nanotechnology Conference, MNC 2003. Institute of Electrical and Electronics Engineers Inc., 2003. p. 302-303 1268766.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Ishida, Y, Matsuzaki, K, Baba, A & Asano, T 2003, Electrostatic inkjet head fabricated by anodization of Si. in Digest of Papers - Microprocesses and Nanotechnology 2003 - 2003 International Microprocesses and Nanotechnology Conference, MNC 2003., 1268766, Institute of Electrical and Electronics Engineers Inc., pp. 302-303, International Microprocesses and Nanotechnology Conference, MNC 2003, Tokyo, Japan, 10/29/03. https://doi.org/10.1109/IMNC.2003.1268766

@inproceedings{6cb776354f70474cbbe538fa86288dc0,

title = "Electrostatic inkjet head fabricated by anodization of Si",

abstract = "In this paper, we successfully fabricated the cone-shaped electrostatic inkjet head using anodization and demonstrated the droplet ejection from this head. The dot size was about 50 /spl mu/m in diameter and this value is much larger than that of expected. Optimization of head shape and driving method will enable us to obtain fine droplets.",

author = "Yuji Ishida and Kazunari Matsuzaki and Akiyoshi Baba and Tanemasa Asano",

year = "2003",

month = jan,

day = "1",

doi = "10.1109/IMNC.2003.1268766",

language = "English",

pages = "302--303",

booktitle = "Digest of Papers - Microprocesses and Nanotechnology 2003 - 2003 International Microprocesses and Nanotechnology Conference, MNC 2003",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

address = "United States",

note = "International Microprocesses and Nanotechnology Conference, MNC 2003 ; Conference date: 29-10-2003 Through 31-10-2003",

}

TY - GEN

T1 - Electrostatic inkjet head fabricated by anodization of Si

AU - Ishida, Yuji

AU - Matsuzaki, Kazunari

AU - Baba, Akiyoshi

AU - Asano, Tanemasa

PY - 2003/1/1

Y1 - 2003/1/1

N2 - In this paper, we successfully fabricated the cone-shaped electrostatic inkjet head using anodization and demonstrated the droplet ejection from this head. The dot size was about 50 /spl mu/m in diameter and this value is much larger than that of expected. Optimization of head shape and driving method will enable us to obtain fine droplets.

AB - In this paper, we successfully fabricated the cone-shaped electrostatic inkjet head using anodization and demonstrated the droplet ejection from this head. The dot size was about 50 /spl mu/m in diameter and this value is much larger than that of expected. Optimization of head shape and driving method will enable us to obtain fine droplets.

UR - http://www.scopus.com/inward/record.url?scp=84949227401&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84949227401&partnerID=8YFLogxK

U2 - 10.1109/IMNC.2003.1268766

DO - 10.1109/IMNC.2003.1268766

M3 - Conference contribution

AN - SCOPUS:84949227401

SP - 302

EP - 303

BT - Digest of Papers - Microprocesses and Nanotechnology 2003 - 2003 International Microprocesses and Nanotechnology Conference, MNC 2003

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - International Microprocesses and Nanotechnology Conference, MNC 2003

Y2 - 29 October 2003 through 31 October 2003

ER -

Electrostatic inkjet head fabricated by anodization of Si

Abstract

Other

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this