Energy-saving high-speed pick-and-place robot using in-frame parallel spring

Jumpei Arata, Yuji Isogai, Junya Sumida, Masamichi Sakaguchi, Ryu Nakadate, Susumu Oguri, Makoto Hashizume

Research output: Contribution to journalArticle

Abstract

Robotic instruments have recently been widely introduced into industrial automation. As energy supply and demand have become global issues, energy saving in industrial robots has become urgent. In general industrial pick-and-place robots, servomotors periodically repeat acceleration and deceleration, consequently lose much energy in motion. We propose a mechanism using an in-frame parallel spring for the pick-and-place robot. During motion, spring blades deform and store energy, then release it as energy of motion, enabling the mechanismto recycle energy that have been lost in conventional mechanisms. In this paper, a 1 DOF proof-of-concept prototype and preliminary feasibility tests are described. In this study, we applied in-frame parallel springs to a mechanism for pick-and-place robot. The parallel springs are fabricated from spring steel SK85M (Young’s modulus: 210 GPa) with 252 mm long, 50 mm wide and 0.3 mm thick. The results suggest that the prototype can achieve a repeated motion with the range of ±145.7 mm in 2.56 Hz by 1.17 W, greatly reduced from that of the the traditional mechanisms. In addition, it is desired to stop the robot immediately in regular motion if anomalies occurred in industrial applications. The prototype showed that an immediate stop in 0.6 s was feasible by dissipating elastic energy stored in spring blades, confirming the feasibility of our proposed mechanism.

Original languageEnglish
Pages (from-to)267-273
Number of pages7
JournalJournal of Robotics and Mechatronics
Volume27
Issue number3
Publication statusPublished - Jan 1 2015

Fingerprint

Energy conservation
Robots
Servomotors
Industrial robots
Deceleration
Industrial applications
Robotics
Automation
Elastic moduli
Steel

All Science Journal Classification (ASJC) codes

  • Computer Science(all)
  • Electrical and Electronic Engineering

Cite this

Arata, J., Isogai, Y., Sumida, J., Sakaguchi, M., Nakadate, R., Oguri, S., & Hashizume, M. (2015). Energy-saving high-speed pick-and-place robot using in-frame parallel spring. Journal of Robotics and Mechatronics, 27(3), 267-273.

Energy-saving high-speed pick-and-place robot using in-frame parallel spring. / Arata, Jumpei; Isogai, Yuji; Sumida, Junya; Sakaguchi, Masamichi; Nakadate, Ryu; Oguri, Susumu; Hashizume, Makoto.

In: Journal of Robotics and Mechatronics, Vol. 27, No. 3, 01.01.2015, p. 267-273.

Research output: Contribution to journalArticle

Arata, J, Isogai, Y, Sumida, J, Sakaguchi, M, Nakadate, R, Oguri, S & Hashizume, M 2015, 'Energy-saving high-speed pick-and-place robot using in-frame parallel spring', Journal of Robotics and Mechatronics, vol. 27, no. 3, pp. 267-273.
Arata J, Isogai Y, Sumida J, Sakaguchi M, Nakadate R, Oguri S et al. Energy-saving high-speed pick-and-place robot using in-frame parallel spring. Journal of Robotics and Mechatronics. 2015 Jan 1;27(3):267-273.
Arata, Jumpei ; Isogai, Yuji ; Sumida, Junya ; Sakaguchi, Masamichi ; Nakadate, Ryu ; Oguri, Susumu ; Hashizume, Makoto. / Energy-saving high-speed pick-and-place robot using in-frame parallel spring. In: Journal of Robotics and Mechatronics. 2015 ; Vol. 27, No. 3. pp. 267-273.
@article{225140ec108c4e51965b18deb63e9633,
title = "Energy-saving high-speed pick-and-place robot using in-frame parallel spring",
abstract = "Robotic instruments have recently been widely introduced into industrial automation. As energy supply and demand have become global issues, energy saving in industrial robots has become urgent. In general industrial pick-and-place robots, servomotors periodically repeat acceleration and deceleration, consequently lose much energy in motion. We propose a mechanism using an in-frame parallel spring for the pick-and-place robot. During motion, spring blades deform and store energy, then release it as energy of motion, enabling the mechanismto recycle energy that have been lost in conventional mechanisms. In this paper, a 1 DOF proof-of-concept prototype and preliminary feasibility tests are described. In this study, we applied in-frame parallel springs to a mechanism for pick-and-place robot. The parallel springs are fabricated from spring steel SK85M (Young’s modulus: 210 GPa) with 252 mm long, 50 mm wide and 0.3 mm thick. The results suggest that the prototype can achieve a repeated motion with the range of ±145.7 mm in 2.56 Hz by 1.17 W, greatly reduced from that of the the traditional mechanisms. In addition, it is desired to stop the robot immediately in regular motion if anomalies occurred in industrial applications. The prototype showed that an immediate stop in 0.6 s was feasible by dissipating elastic energy stored in spring blades, confirming the feasibility of our proposed mechanism.",
author = "Jumpei Arata and Yuji Isogai and Junya Sumida and Masamichi Sakaguchi and Ryu Nakadate and Susumu Oguri and Makoto Hashizume",
year = "2015",
month = "1",
day = "1",
language = "English",
volume = "27",
pages = "267--273",
journal = "Journal of Robotics and Mechatronics",
issn = "0915-3942",
publisher = "Fuji Technology Press",
number = "3",

}

TY - JOUR

T1 - Energy-saving high-speed pick-and-place robot using in-frame parallel spring

AU - Arata, Jumpei

AU - Isogai, Yuji

AU - Sumida, Junya

AU - Sakaguchi, Masamichi

AU - Nakadate, Ryu

AU - Oguri, Susumu

AU - Hashizume, Makoto

PY - 2015/1/1

Y1 - 2015/1/1

N2 - Robotic instruments have recently been widely introduced into industrial automation. As energy supply and demand have become global issues, energy saving in industrial robots has become urgent. In general industrial pick-and-place robots, servomotors periodically repeat acceleration and deceleration, consequently lose much energy in motion. We propose a mechanism using an in-frame parallel spring for the pick-and-place robot. During motion, spring blades deform and store energy, then release it as energy of motion, enabling the mechanismto recycle energy that have been lost in conventional mechanisms. In this paper, a 1 DOF proof-of-concept prototype and preliminary feasibility tests are described. In this study, we applied in-frame parallel springs to a mechanism for pick-and-place robot. The parallel springs are fabricated from spring steel SK85M (Young’s modulus: 210 GPa) with 252 mm long, 50 mm wide and 0.3 mm thick. The results suggest that the prototype can achieve a repeated motion with the range of ±145.7 mm in 2.56 Hz by 1.17 W, greatly reduced from that of the the traditional mechanisms. In addition, it is desired to stop the robot immediately in regular motion if anomalies occurred in industrial applications. The prototype showed that an immediate stop in 0.6 s was feasible by dissipating elastic energy stored in spring blades, confirming the feasibility of our proposed mechanism.

AB - Robotic instruments have recently been widely introduced into industrial automation. As energy supply and demand have become global issues, energy saving in industrial robots has become urgent. In general industrial pick-and-place robots, servomotors periodically repeat acceleration and deceleration, consequently lose much energy in motion. We propose a mechanism using an in-frame parallel spring for the pick-and-place robot. During motion, spring blades deform and store energy, then release it as energy of motion, enabling the mechanismto recycle energy that have been lost in conventional mechanisms. In this paper, a 1 DOF proof-of-concept prototype and preliminary feasibility tests are described. In this study, we applied in-frame parallel springs to a mechanism for pick-and-place robot. The parallel springs are fabricated from spring steel SK85M (Young’s modulus: 210 GPa) with 252 mm long, 50 mm wide and 0.3 mm thick. The results suggest that the prototype can achieve a repeated motion with the range of ±145.7 mm in 2.56 Hz by 1.17 W, greatly reduced from that of the the traditional mechanisms. In addition, it is desired to stop the robot immediately in regular motion if anomalies occurred in industrial applications. The prototype showed that an immediate stop in 0.6 s was feasible by dissipating elastic energy stored in spring blades, confirming the feasibility of our proposed mechanism.

UR - http://www.scopus.com/inward/record.url?scp=84937933340&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84937933340&partnerID=8YFLogxK

M3 - Article

VL - 27

SP - 267

EP - 273

JO - Journal of Robotics and Mechatronics

JF - Journal of Robotics and Mechatronics

SN - 0915-3942

IS - 3

ER -