Entropy generation analysis of two-bed, silica gel-water, non-regenerative adsorption chillers

H. T. Chua, K. C. Ng, A. Malek, T. Kashiwagi, A. Akisawa, B. B. Saha

Research output: Contribution to journalArticlepeer-review

37 Citations (Scopus)

Abstract

The current thrust on the use of environmentally friendly technologies for cooling applications, inter alia, envisages the adoption of adsorption systems. Adsorption chillers are known to be 'inefficient' due to their low coefficient of performance. Although the basic physics of heat and mass transfer in various components of the system is well understood, there is a lacuna in the quantification of irreversibilities. In this paper, a silica gel-water, two-bed, non-regenerative chiller is analysed. It is shown that the largest cycle-averaged rate of entropy generation is in the beds and that the least is in the condenser. The entropy generation rates in the beds are further studied, showing that the maximum contribution is made during the switching phase. In general, manufacturers' effort to maximize cooling capacity is shown to correspond to maximum entropy generation in the evaporator.

Original languageEnglish
Pages (from-to)1471-1477
Number of pages7
JournalJournal of Physics D: Applied Physics
Volume31
Issue number12
DOIs
Publication statusPublished - Jun 21 1998
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Acoustics and Ultrasonics
  • Surfaces, Coatings and Films

Fingerprint Dive into the research topics of 'Entropy generation analysis of two-bed, silica gel-water, non-regenerative adsorption chillers'. Together they form a unique fingerprint.

Cite this