Entropy generation minimization: A practical approach for performance evaluation of temperature cascaded co-generation plants

Aung Myat, Thu Kyaw, Young Deuk Kim, Bidyut Baran Saha, Kim Choon Ng

Research output: Contribution to journalArticle

19 Citations (Scopus)

Abstract

We present a practical tool that employs entropy generation minimization (EGM) approach for an in-depth performance evaluation of a co-generation plant with a temperature-cascaded concept. Co-generation plant produces useful effect production sequentially, i.e., (i) electricity from the micro-turbines, (ii) low pressure steam at 250 °C or about 8-10 bars, (iii) cooling capacity of 4 refrigeration tones (Rtons) and (iv) dehumidification of outdoor air for air conditioned space. The main objective is to configure the most efficient configuration of producing power and heat. We employed entropy generation minimization (EGM) which reflects to minimize the dissipative losses and maximize the cycle efficiency of the individual thermally activated systems. The minimization of dissipative losses or EGM is performed in two steps namely, (i) adjusting heat source temperatures for the heat-fired cycles and (ii) the use of Genetic Algorithm (GA), to seek out the sensitivity of heat transfer areas, flow rates of working fluids, inlet temperatures of heat sources and coolant, etc., over the anticipated range of operation to achieve maximum efficiency. With EGM equipped with GA, we verified that the local minimization of entropy generation individually at each of the heat-activated processes would lead to the maximum efficiency of the system.

Original languageEnglish
Pages (from-to)493-521
Number of pages29
JournalEnergy
Volume46
Issue number1
DOIs
Publication statusPublished - Jan 1 2012

Fingerprint

Cogeneration plants
Entropy
Temperature
Genetic algorithms
Refrigeration
Air
Coolants
Turbines
Steam
Electricity
Flow rate
Hot Temperature
Heat transfer
Cooling
Fluids

All Science Journal Classification (ASJC) codes

  • Civil and Structural Engineering
  • Building and Construction
  • Pollution
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering
  • Electrical and Electronic Engineering

Cite this

Entropy generation minimization : A practical approach for performance evaluation of temperature cascaded co-generation plants. / Myat, Aung; Kyaw, Thu; Kim, Young Deuk; Saha, Bidyut Baran; Choon Ng, Kim.

In: Energy, Vol. 46, No. 1, 01.01.2012, p. 493-521.

Research output: Contribution to journalArticle

@article{b71f871eb4274f99accde1d5b81f2494,
title = "Entropy generation minimization: A practical approach for performance evaluation of temperature cascaded co-generation plants",
abstract = "We present a practical tool that employs entropy generation minimization (EGM) approach for an in-depth performance evaluation of a co-generation plant with a temperature-cascaded concept. Co-generation plant produces useful effect production sequentially, i.e., (i) electricity from the micro-turbines, (ii) low pressure steam at 250 °C or about 8-10 bars, (iii) cooling capacity of 4 refrigeration tones (Rtons) and (iv) dehumidification of outdoor air for air conditioned space. The main objective is to configure the most efficient configuration of producing power and heat. We employed entropy generation minimization (EGM) which reflects to minimize the dissipative losses and maximize the cycle efficiency of the individual thermally activated systems. The minimization of dissipative losses or EGM is performed in two steps namely, (i) adjusting heat source temperatures for the heat-fired cycles and (ii) the use of Genetic Algorithm (GA), to seek out the sensitivity of heat transfer areas, flow rates of working fluids, inlet temperatures of heat sources and coolant, etc., over the anticipated range of operation to achieve maximum efficiency. With EGM equipped with GA, we verified that the local minimization of entropy generation individually at each of the heat-activated processes would lead to the maximum efficiency of the system.",
author = "Aung Myat and Thu Kyaw and Kim, {Young Deuk} and Saha, {Bidyut Baran} and {Choon Ng}, Kim",
year = "2012",
month = "1",
day = "1",
doi = "10.1016/j.energy.2012.07.062",
language = "English",
volume = "46",
pages = "493--521",
journal = "Energy",
issn = "0360-5442",
publisher = "Elsevier Limited",
number = "1",

}

TY - JOUR

T1 - Entropy generation minimization

T2 - A practical approach for performance evaluation of temperature cascaded co-generation plants

AU - Myat, Aung

AU - Kyaw, Thu

AU - Kim, Young Deuk

AU - Saha, Bidyut Baran

AU - Choon Ng, Kim

PY - 2012/1/1

Y1 - 2012/1/1

N2 - We present a practical tool that employs entropy generation minimization (EGM) approach for an in-depth performance evaluation of a co-generation plant with a temperature-cascaded concept. Co-generation plant produces useful effect production sequentially, i.e., (i) electricity from the micro-turbines, (ii) low pressure steam at 250 °C or about 8-10 bars, (iii) cooling capacity of 4 refrigeration tones (Rtons) and (iv) dehumidification of outdoor air for air conditioned space. The main objective is to configure the most efficient configuration of producing power and heat. We employed entropy generation minimization (EGM) which reflects to minimize the dissipative losses and maximize the cycle efficiency of the individual thermally activated systems. The minimization of dissipative losses or EGM is performed in two steps namely, (i) adjusting heat source temperatures for the heat-fired cycles and (ii) the use of Genetic Algorithm (GA), to seek out the sensitivity of heat transfer areas, flow rates of working fluids, inlet temperatures of heat sources and coolant, etc., over the anticipated range of operation to achieve maximum efficiency. With EGM equipped with GA, we verified that the local minimization of entropy generation individually at each of the heat-activated processes would lead to the maximum efficiency of the system.

AB - We present a practical tool that employs entropy generation minimization (EGM) approach for an in-depth performance evaluation of a co-generation plant with a temperature-cascaded concept. Co-generation plant produces useful effect production sequentially, i.e., (i) electricity from the micro-turbines, (ii) low pressure steam at 250 °C or about 8-10 bars, (iii) cooling capacity of 4 refrigeration tones (Rtons) and (iv) dehumidification of outdoor air for air conditioned space. The main objective is to configure the most efficient configuration of producing power and heat. We employed entropy generation minimization (EGM) which reflects to minimize the dissipative losses and maximize the cycle efficiency of the individual thermally activated systems. The minimization of dissipative losses or EGM is performed in two steps namely, (i) adjusting heat source temperatures for the heat-fired cycles and (ii) the use of Genetic Algorithm (GA), to seek out the sensitivity of heat transfer areas, flow rates of working fluids, inlet temperatures of heat sources and coolant, etc., over the anticipated range of operation to achieve maximum efficiency. With EGM equipped with GA, we verified that the local minimization of entropy generation individually at each of the heat-activated processes would lead to the maximum efficiency of the system.

UR - http://www.scopus.com/inward/record.url?scp=84867229637&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84867229637&partnerID=8YFLogxK

U2 - 10.1016/j.energy.2012.07.062

DO - 10.1016/j.energy.2012.07.062

M3 - Article

AN - SCOPUS:84867229637

VL - 46

SP - 493

EP - 521

JO - Energy

JF - Energy

SN - 0360-5442

IS - 1

ER -