Evaluation of mechanical properties of hollow particle reinforced composites and analyses aimed at their improvement

H. Toda, H. Kagajo, K. Hosoi, T. Kobayashi, Y. Ito, T. Higashihara, T. Gohda

Research output: Contribution to journalArticle

8 Citations (Scopus)

Abstract

Hollow particle filled epoxy composites are fabricated by an ordinary molding technique. Young's modulus, tensile strength, fracture toughness and dielectric constant are measured as a function of density of the composites (i.e. wall thickness of the hollow particles). Specific strength is almost flat irrespective of the density, while specific modulus and the dielectric constant increase, and the fracture toughness simultaneously decreases with the decrease in the density. Fracture path varies from fracture particles in the case of particles with thinner shell to interfacial debonding in the case of thicker shell in the fracture toughness tests, while particle fracture is predominant in the tensile tests. In-situ observation of the material tests and finite element analyses are utilized to interpret the deformation and fracture behaviors and also to estimate the in-situ strength of silica. It is clarified by the observation that particles larger than 30 μm in diameter are predominantly damaged and smaller particles less than 15 μm are never fractured. Premature fracture of such coarse particles in early stage of loading is attributable to the strength properties. The in-situ strength of silica increases with the decrease in the particle diameter. According to the result of the finite element analysis, stress concentrates near inner surface along an equator under uni-axial loading, and this tendency becomes remarkable with the decrease in the wall thickness. On the other hand, interfacial stress decreases rapidly with the decrease in the wall thickness. The stress concentration along the equator is relaxed under multi-axial loading which is possible in the fracture toughness tests. All of these results indicate that elimination of the coarse particles is essential to improve the tensile properties, and that interfacial modification is effective only for toughness enhancement. SiCp reinforced Al 2 O 3 and SiCp reinforced aluminum composites are also analyzed numerically to evaluate the efficiency of introducing hollow particles into ceramics and polymer materials.

Original languageEnglish
Pages (from-to)474-481
Number of pages8
JournalZairyo/Journal of the Society of Materials Science, Japan
Volume50
Issue number5
DOIs
Publication statusPublished - May 2001
Externally publishedYes

Fingerprint

Particle reinforced composites
hollow
mechanical properties
Fracture toughness
Mechanical properties
composite materials
evaluation
Silicon Dioxide
fracture strength
Composite materials
Permittivity
Silica
Debonding
Aluminum
Tensile properties
Molding
Density (specific gravity)
equators
Toughness
Stress concentration

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Evaluation of mechanical properties of hollow particle reinforced composites and analyses aimed at their improvement. / Toda, H.; Kagajo, H.; Hosoi, K.; Kobayashi, T.; Ito, Y.; Higashihara, T.; Gohda, T.

In: Zairyo/Journal of the Society of Materials Science, Japan, Vol. 50, No. 5, 05.2001, p. 474-481.

Research output: Contribution to journalArticle

Toda, H. ; Kagajo, H. ; Hosoi, K. ; Kobayashi, T. ; Ito, Y. ; Higashihara, T. ; Gohda, T. / Evaluation of mechanical properties of hollow particle reinforced composites and analyses aimed at their improvement. In: Zairyo/Journal of the Society of Materials Science, Japan. 2001 ; Vol. 50, No. 5. pp. 474-481.
@article{9f610c7ecfe2485aa8807d4e5737cfda,
title = "Evaluation of mechanical properties of hollow particle reinforced composites and analyses aimed at their improvement",
abstract = "Hollow particle filled epoxy composites are fabricated by an ordinary molding technique. Young's modulus, tensile strength, fracture toughness and dielectric constant are measured as a function of density of the composites (i.e. wall thickness of the hollow particles). Specific strength is almost flat irrespective of the density, while specific modulus and the dielectric constant increase, and the fracture toughness simultaneously decreases with the decrease in the density. Fracture path varies from fracture particles in the case of particles with thinner shell to interfacial debonding in the case of thicker shell in the fracture toughness tests, while particle fracture is predominant in the tensile tests. In-situ observation of the material tests and finite element analyses are utilized to interpret the deformation and fracture behaviors and also to estimate the in-situ strength of silica. It is clarified by the observation that particles larger than 30 μm in diameter are predominantly damaged and smaller particles less than 15 μm are never fractured. Premature fracture of such coarse particles in early stage of loading is attributable to the strength properties. The in-situ strength of silica increases with the decrease in the particle diameter. According to the result of the finite element analysis, stress concentrates near inner surface along an equator under uni-axial loading, and this tendency becomes remarkable with the decrease in the wall thickness. On the other hand, interfacial stress decreases rapidly with the decrease in the wall thickness. The stress concentration along the equator is relaxed under multi-axial loading which is possible in the fracture toughness tests. All of these results indicate that elimination of the coarse particles is essential to improve the tensile properties, and that interfacial modification is effective only for toughness enhancement. SiCp reinforced Al 2 O 3 and SiCp reinforced aluminum composites are also analyzed numerically to evaluate the efficiency of introducing hollow particles into ceramics and polymer materials.",
author = "H. Toda and H. Kagajo and K. Hosoi and T. Kobayashi and Y. Ito and T. Higashihara and T. Gohda",
year = "2001",
month = "5",
doi = "10.2472/jsms.50.474",
language = "English",
volume = "50",
pages = "474--481",
journal = "Zairyo/Journal of the Society of Materials Science, Japan",
issn = "0514-5163",
publisher = "公益社団法人 日本材料学会",
number = "5",

}

TY - JOUR

T1 - Evaluation of mechanical properties of hollow particle reinforced composites and analyses aimed at their improvement

AU - Toda, H.

AU - Kagajo, H.

AU - Hosoi, K.

AU - Kobayashi, T.

AU - Ito, Y.

AU - Higashihara, T.

AU - Gohda, T.

PY - 2001/5

Y1 - 2001/5

N2 - Hollow particle filled epoxy composites are fabricated by an ordinary molding technique. Young's modulus, tensile strength, fracture toughness and dielectric constant are measured as a function of density of the composites (i.e. wall thickness of the hollow particles). Specific strength is almost flat irrespective of the density, while specific modulus and the dielectric constant increase, and the fracture toughness simultaneously decreases with the decrease in the density. Fracture path varies from fracture particles in the case of particles with thinner shell to interfacial debonding in the case of thicker shell in the fracture toughness tests, while particle fracture is predominant in the tensile tests. In-situ observation of the material tests and finite element analyses are utilized to interpret the deformation and fracture behaviors and also to estimate the in-situ strength of silica. It is clarified by the observation that particles larger than 30 μm in diameter are predominantly damaged and smaller particles less than 15 μm are never fractured. Premature fracture of such coarse particles in early stage of loading is attributable to the strength properties. The in-situ strength of silica increases with the decrease in the particle diameter. According to the result of the finite element analysis, stress concentrates near inner surface along an equator under uni-axial loading, and this tendency becomes remarkable with the decrease in the wall thickness. On the other hand, interfacial stress decreases rapidly with the decrease in the wall thickness. The stress concentration along the equator is relaxed under multi-axial loading which is possible in the fracture toughness tests. All of these results indicate that elimination of the coarse particles is essential to improve the tensile properties, and that interfacial modification is effective only for toughness enhancement. SiCp reinforced Al 2 O 3 and SiCp reinforced aluminum composites are also analyzed numerically to evaluate the efficiency of introducing hollow particles into ceramics and polymer materials.

AB - Hollow particle filled epoxy composites are fabricated by an ordinary molding technique. Young's modulus, tensile strength, fracture toughness and dielectric constant are measured as a function of density of the composites (i.e. wall thickness of the hollow particles). Specific strength is almost flat irrespective of the density, while specific modulus and the dielectric constant increase, and the fracture toughness simultaneously decreases with the decrease in the density. Fracture path varies from fracture particles in the case of particles with thinner shell to interfacial debonding in the case of thicker shell in the fracture toughness tests, while particle fracture is predominant in the tensile tests. In-situ observation of the material tests and finite element analyses are utilized to interpret the deformation and fracture behaviors and also to estimate the in-situ strength of silica. It is clarified by the observation that particles larger than 30 μm in diameter are predominantly damaged and smaller particles less than 15 μm are never fractured. Premature fracture of such coarse particles in early stage of loading is attributable to the strength properties. The in-situ strength of silica increases with the decrease in the particle diameter. According to the result of the finite element analysis, stress concentrates near inner surface along an equator under uni-axial loading, and this tendency becomes remarkable with the decrease in the wall thickness. On the other hand, interfacial stress decreases rapidly with the decrease in the wall thickness. The stress concentration along the equator is relaxed under multi-axial loading which is possible in the fracture toughness tests. All of these results indicate that elimination of the coarse particles is essential to improve the tensile properties, and that interfacial modification is effective only for toughness enhancement. SiCp reinforced Al 2 O 3 and SiCp reinforced aluminum composites are also analyzed numerically to evaluate the efficiency of introducing hollow particles into ceramics and polymer materials.

UR - http://www.scopus.com/inward/record.url?scp=0035330389&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0035330389&partnerID=8YFLogxK

U2 - 10.2472/jsms.50.474

DO - 10.2472/jsms.50.474

M3 - Article

AN - SCOPUS:0035330389

VL - 50

SP - 474

EP - 481

JO - Zairyo/Journal of the Society of Materials Science, Japan

JF - Zairyo/Journal of the Society of Materials Science, Japan

SN - 0514-5163

IS - 5

ER -