Evaluation of mobile dislocation density of modified 9Cr-1Mo steel by stress change test

Hiroyuki Hayakawa, Daisuke Terada, Fuyuki Yoshida, Hideharu Nakashima, Yasufumi Goto

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

The quantitative evaluation of the relationship between creep deformation and microstructure is important in order to improve the accuracy of the residual creep life evaluation of power boilers and turbines. In this study to characterize the creep deformation mechanism of a Modified 9Cr-1Mo Steel used in newly constructed boilers, stress change tests were conducted during creep tests. It was confirmed that the dislocation behavior during the creep tests were in viscous manner because of no instant plastic strain observed at stress increments and transient backward creep behavior after stress reduction. Mobilities of dislocation evaluated by observed backward creep behaviors after stress reductions and internal stresses evaluated by the changes of creep strain rate in stress increments were stable during creep deformation. Mobile dislocation densities were evaluated with the estimated mobilities of dislocation and the changes of creep strain rate in stress increments. Variation of evaluated mobile dislocation densities with creep strain showed same tendency of variation of creep strain rate. Therefore mobile dislocation density is the dominant factor that influences the creep strain rate in creep deformation of this steel. The internal stress of mobile dislocation can be considered to be originated from the line tension of bowing mobile dislocation in this steel.

Original languageEnglish
Pages (from-to)1076-1081
Number of pages6
JournalTetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
Volume89
Issue number10
DOIs
Publication statusPublished - Oct 2003

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Physical and Theoretical Chemistry
  • Metals and Alloys
  • Materials Chemistry

Cite this