Excitation force and blade inlet flow characteristics of radial turbines subject to nozzle wake effect

Eito Matsuo, Haruo Yoshiki, Norio Nakazawa, Masahiro Inoue, Masato Furukawa, Ryoji Utsumi

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

The authors developed a method to estimate nozzle-wake exciting forces (NEF) using Fourier series development of angular momentum flux (AMF) at the blade inlet of radial turbines. The NEF is strongly affected by the nozzle profiles. Application of this method to the evaluation of the NEF and AMF resulted in fundamental standards for selection of the number of nozzle blades and the profiles. The values of each order of NEF are obtained from Fourier series development of AMF. There is an increasing region of NEF to the distance from a nozzle trailing edge. The maximum estimation error of the blade vibration stress, which is calculated using the values of the first order of NEF and the coefficients of effective exciting force, is 10%. The coefficient of effective exciting force is 1/3 in the first and second modes, and 1/2 in third mode. Those coefficients are evaluated as the ratio of NEF and equivalent exiting forces calculated using the measured data of vibration stresses at two different points on the blade.

Original languageEnglish
Pages (from-to)3635-3641
Number of pages7
JournalNippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B
Volume62
Issue number602
DOIs
Publication statusPublished - Jan 1 1996

Fingerprint

inlet flow
Inlet flow
flow characteristics
turbines
blades
wakes
nozzles
Turbomachine blades
Nozzles
Turbines
excitation
Angular momentum
angular momentum
Fourier series
Fluxes
coefficients
vibration
Intake systems
trailing edges
profiles

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Mechanical Engineering

Cite this

Excitation force and blade inlet flow characteristics of radial turbines subject to nozzle wake effect. / Matsuo, Eito; Yoshiki, Haruo; Nakazawa, Norio; Inoue, Masahiro; Furukawa, Masato; Utsumi, Ryoji.

In: Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, Vol. 62, No. 602, 01.01.1996, p. 3635-3641.

Research output: Contribution to journalArticle

@article{fa61fd15404041ca9dc166bbdf1ed8b0,
title = "Excitation force and blade inlet flow characteristics of radial turbines subject to nozzle wake effect",
abstract = "The authors developed a method to estimate nozzle-wake exciting forces (NEF) using Fourier series development of angular momentum flux (AMF) at the blade inlet of radial turbines. The NEF is strongly affected by the nozzle profiles. Application of this method to the evaluation of the NEF and AMF resulted in fundamental standards for selection of the number of nozzle blades and the profiles. The values of each order of NEF are obtained from Fourier series development of AMF. There is an increasing region of NEF to the distance from a nozzle trailing edge. The maximum estimation error of the blade vibration stress, which is calculated using the values of the first order of NEF and the coefficients of effective exciting force, is 10{\%}. The coefficient of effective exciting force is 1/3 in the first and second modes, and 1/2 in third mode. Those coefficients are evaluated as the ratio of NEF and equivalent exiting forces calculated using the measured data of vibration stresses at two different points on the blade.",
author = "Eito Matsuo and Haruo Yoshiki and Norio Nakazawa and Masahiro Inoue and Masato Furukawa and Ryoji Utsumi",
year = "1996",
month = "1",
day = "1",
doi = "10.1299/kikaib.62.3635",
language = "English",
volume = "62",
pages = "3635--3641",
journal = "Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B",
issn = "0387-5016",
publisher = "The Japan Society of Mechanical Engineers",
number = "602",

}

TY - JOUR

T1 - Excitation force and blade inlet flow characteristics of radial turbines subject to nozzle wake effect

AU - Matsuo, Eito

AU - Yoshiki, Haruo

AU - Nakazawa, Norio

AU - Inoue, Masahiro

AU - Furukawa, Masato

AU - Utsumi, Ryoji

PY - 1996/1/1

Y1 - 1996/1/1

N2 - The authors developed a method to estimate nozzle-wake exciting forces (NEF) using Fourier series development of angular momentum flux (AMF) at the blade inlet of radial turbines. The NEF is strongly affected by the nozzle profiles. Application of this method to the evaluation of the NEF and AMF resulted in fundamental standards for selection of the number of nozzle blades and the profiles. The values of each order of NEF are obtained from Fourier series development of AMF. There is an increasing region of NEF to the distance from a nozzle trailing edge. The maximum estimation error of the blade vibration stress, which is calculated using the values of the first order of NEF and the coefficients of effective exciting force, is 10%. The coefficient of effective exciting force is 1/3 in the first and second modes, and 1/2 in third mode. Those coefficients are evaluated as the ratio of NEF and equivalent exiting forces calculated using the measured data of vibration stresses at two different points on the blade.

AB - The authors developed a method to estimate nozzle-wake exciting forces (NEF) using Fourier series development of angular momentum flux (AMF) at the blade inlet of radial turbines. The NEF is strongly affected by the nozzle profiles. Application of this method to the evaluation of the NEF and AMF resulted in fundamental standards for selection of the number of nozzle blades and the profiles. The values of each order of NEF are obtained from Fourier series development of AMF. There is an increasing region of NEF to the distance from a nozzle trailing edge. The maximum estimation error of the blade vibration stress, which is calculated using the values of the first order of NEF and the coefficients of effective exciting force, is 10%. The coefficient of effective exciting force is 1/3 in the first and second modes, and 1/2 in third mode. Those coefficients are evaluated as the ratio of NEF and equivalent exiting forces calculated using the measured data of vibration stresses at two different points on the blade.

UR - http://www.scopus.com/inward/record.url?scp=0030261806&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0030261806&partnerID=8YFLogxK

U2 - 10.1299/kikaib.62.3635

DO - 10.1299/kikaib.62.3635

M3 - Article

AN - SCOPUS:0030261806

VL - 62

SP - 3635

EP - 3641

JO - Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B

JF - Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B

SN - 0387-5016

IS - 602

ER -