Experimental and computational studies on Two-Dimensional supersonic mixing flow physics

Shigeru Aso, Shingo Kawano, Kei Inoue

Research output: Contribution to conferencePaper

2 Citations (Scopus)

Abstract

Experimental and computational studies on supersonic mixing by slotted injection were conducted. In the experiments flat plate model was installed into supersonic free stream of Mach number 3.76 and sonic jet was injected through the slot at injection angle of 30, 90, 150 degree. Surface pressure distributions and spatial pitot pressure distributions were measured. Computation was conducted for the flowfield and the results were compared with experiments. Quite good agreements were obtained. The results showed that the computation is quite reliable to analyze the supersonic mixing flow field. Mixing rate and total pressure loss were assessed for 30, 60, 90, 120, 150 degree case by computation and it was indicated that the mixing efficiency become higher at injection angle lower than 30 degree when computation was conducted for single grid but this phenomenon was not seen when calculation was conducted including nozzle effect.

Original languageEnglish
Publication statusPublished - Dec 1 2002
Event40th AIAA Aerospace Sciences Meeting and Exhibit 2002 - Reno, NV, United States
Duration: Jan 14 2002Jan 17 2002

Other

Other40th AIAA Aerospace Sciences Meeting and Exhibit 2002
CountryUnited States
CityReno, NV
Period1/14/021/17/02

Fingerprint

physics
Physics
injection
pressure distribution
Pressure distribution
surface pressure
flow field
free flow
flat plates
Mach number
slots
experiment
nozzles
Nozzles
Flow fields
flow distribution
Experiments
grids
distribution

All Science Journal Classification (ASJC) codes

  • Space and Planetary Science
  • Aerospace Engineering

Cite this

Aso, S., Kawano, S., & Inoue, K. (2002). Experimental and computational studies on Two-Dimensional supersonic mixing flow physics. Paper presented at 40th AIAA Aerospace Sciences Meeting and Exhibit 2002, Reno, NV, United States.

Experimental and computational studies on Two-Dimensional supersonic mixing flow physics. / Aso, Shigeru; Kawano, Shingo; Inoue, Kei.

2002. Paper presented at 40th AIAA Aerospace Sciences Meeting and Exhibit 2002, Reno, NV, United States.

Research output: Contribution to conferencePaper

Aso, S, Kawano, S & Inoue, K 2002, 'Experimental and computational studies on Two-Dimensional supersonic mixing flow physics' Paper presented at 40th AIAA Aerospace Sciences Meeting and Exhibit 2002, Reno, NV, United States, 1/14/02 - 1/17/02, .
Aso S, Kawano S, Inoue K. Experimental and computational studies on Two-Dimensional supersonic mixing flow physics. 2002. Paper presented at 40th AIAA Aerospace Sciences Meeting and Exhibit 2002, Reno, NV, United States.
Aso, Shigeru ; Kawano, Shingo ; Inoue, Kei. / Experimental and computational studies on Two-Dimensional supersonic mixing flow physics. Paper presented at 40th AIAA Aerospace Sciences Meeting and Exhibit 2002, Reno, NV, United States.
@conference{e212ac3ea85c4f34bcf3a81b7d88642f,
title = "Experimental and computational studies on Two-Dimensional supersonic mixing flow physics",
abstract = "Experimental and computational studies on supersonic mixing by slotted injection were conducted. In the experiments flat plate model was installed into supersonic free stream of Mach number 3.76 and sonic jet was injected through the slot at injection angle of 30, 90, 150 degree. Surface pressure distributions and spatial pitot pressure distributions were measured. Computation was conducted for the flowfield and the results were compared with experiments. Quite good agreements were obtained. The results showed that the computation is quite reliable to analyze the supersonic mixing flow field. Mixing rate and total pressure loss were assessed for 30, 60, 90, 120, 150 degree case by computation and it was indicated that the mixing efficiency become higher at injection angle lower than 30 degree when computation was conducted for single grid but this phenomenon was not seen when calculation was conducted including nozzle effect.",
author = "Shigeru Aso and Shingo Kawano and Kei Inoue",
year = "2002",
month = "12",
day = "1",
language = "English",
note = "40th AIAA Aerospace Sciences Meeting and Exhibit 2002 ; Conference date: 14-01-2002 Through 17-01-2002",

}

TY - CONF

T1 - Experimental and computational studies on Two-Dimensional supersonic mixing flow physics

AU - Aso, Shigeru

AU - Kawano, Shingo

AU - Inoue, Kei

PY - 2002/12/1

Y1 - 2002/12/1

N2 - Experimental and computational studies on supersonic mixing by slotted injection were conducted. In the experiments flat plate model was installed into supersonic free stream of Mach number 3.76 and sonic jet was injected through the slot at injection angle of 30, 90, 150 degree. Surface pressure distributions and spatial pitot pressure distributions were measured. Computation was conducted for the flowfield and the results were compared with experiments. Quite good agreements were obtained. The results showed that the computation is quite reliable to analyze the supersonic mixing flow field. Mixing rate and total pressure loss were assessed for 30, 60, 90, 120, 150 degree case by computation and it was indicated that the mixing efficiency become higher at injection angle lower than 30 degree when computation was conducted for single grid but this phenomenon was not seen when calculation was conducted including nozzle effect.

AB - Experimental and computational studies on supersonic mixing by slotted injection were conducted. In the experiments flat plate model was installed into supersonic free stream of Mach number 3.76 and sonic jet was injected through the slot at injection angle of 30, 90, 150 degree. Surface pressure distributions and spatial pitot pressure distributions were measured. Computation was conducted for the flowfield and the results were compared with experiments. Quite good agreements were obtained. The results showed that the computation is quite reliable to analyze the supersonic mixing flow field. Mixing rate and total pressure loss were assessed for 30, 60, 90, 120, 150 degree case by computation and it was indicated that the mixing efficiency become higher at injection angle lower than 30 degree when computation was conducted for single grid but this phenomenon was not seen when calculation was conducted including nozzle effect.

UR - http://www.scopus.com/inward/record.url?scp=84894347112&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84894347112&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:84894347112

ER -