Experimental study of the active compensation to a full-size separate-shell magnetic shield

Yoshihiro Nakashima, Yusuke Suzuki, Ichiro Sasada, Masaki Shimada, Toshikazu Takeda

Research output: Contribution to journalArticle

8 Citations (Scopus)

Abstract

Shielding efficiency of a full-size separate-shell magnetic shield equipped with active compensation coils is presented. Its size is 135 cm in height, 100 cm in width, and 240 cm in depth. With respect to active compensation two control schemes, i.e., feedback and feedforward, are compared. The shielding efficiency is estimated from the measurements of the attenuation of environmental magnetic fields in two axial directions (horizontal and vertical). In the case of feedback, a reference sensor that measures the incoming magnetic fields is positioned inside the shield, whereas in the case of feedforward the reference sensor is positioned outside the shell. In both axial directions, the environmental magnetic noise can be reduced to less than 500 pT: the noise floor measured by a fluxgate magnetometer is approximately 10 pT/Hz in the frequency range from 10 to 100 Hz.

Original languageEnglish
Article number5467524
Pages (from-to)2318-2321
Number of pages4
JournalIEEE Transactions on Magnetics
Volume46
Issue number6
DOIs
Publication statusPublished - Jun 1 2010

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Experimental study of the active compensation to a full-size separate-shell magnetic shield'. Together they form a unique fingerprint.

  • Cite this