Fabrication of a gated cold cathode using the inkjet embedding method

Akiyoshi Baba, Tanemasa Asano

Research output: Contribution to journalReview articlepeer-review

1 Citation (Scopus)

Abstract

We proposed the inkjet embedding method for fabrication of a gated cold cathode. In fabrication of the gated cold cathode, a conventional photolithography and a newly developed system for inkjet printing were used for the gate aperture opening and the ink embedding, respectively. It was found that the surface free energy control before embedding of the ink, the ink drying, and separation between the gate electrode and the ink are the key steps to successful fabrication of the gated cold cathode. We also demonstrated the field electron emission from the gated cold cathode. The turn-on voltage was about 40V, and an anode current of about 3 μA was obtained at the gate voltage of 120V.

Original languageEnglish
Pages (from-to)5631-5636
Number of pages6
JournalJapanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers
Volume45
Issue number6 B
DOIs
Publication statusPublished - Jun 20 2006

All Science Journal Classification (ASJC) codes

  • Engineering(all)
  • Physics and Astronomy(all)

Fingerprint Dive into the research topics of 'Fabrication of a gated cold cathode using the inkjet embedding method'. Together they form a unique fingerprint.

Cite this