Fabrication of EBC System with Oxide Eutectic Structure

Shunkichi Ueno, Kyosuke Seya, Byung Koog Jang

Research output: Chapter in Book/Report/Conference proceedingChapter

Abstract

In this paper, the fabrication method and the formation mechanism of a new EBC system with Al2O3-HfO2 eutectic structure are discussed. A rapid heating process is required for the fabrication of Al2O3-HfO2 eutectic EBC film on silicon carbide substrate. Optical zone melting method was applied for the fabrication method of the eutectic EBC film. At high temperature under light focusing, a small amount of silicon carbide decomposed into silicon and carbon and each component of the Al2O3 and HfO2 in molten phase reacts with the free carbon. And a small amount of Al2O3 component reacts with the free carbon and vaporized from the molten phase. The composition of the molten phase becomes H HfO2 rich. HfO2 phase is also reacts with the free carbon and HfC phase is solidified on the silicon carbide substrate. A high density intermediate layer consisted of HfC is formed. When the solidification process finished before all of HfO2 phase is reduced to HfC phase, HfC-HfO2 functionally graded layer is formed on the silicon carbide substrate. The Al2O3-HfO2 eutectic structure grows from the top of the intermediate layer.

Original languageEnglish
Title of host publicationCeramic Transactions
PublisherWiley-Blackwell
Pages65-72
Number of pages8
Volume256
ISBN (Electronic)9781119234593
ISBN (Print)9781119234586
DOIs
Publication statusPublished - May 31 2016
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Engineering(all)
  • Materials Science(all)

Fingerprint Dive into the research topics of 'Fabrication of EBC System with Oxide Eutectic Structure'. Together they form a unique fingerprint.

  • Cite this

    Ueno, S., Seya, K., & Jang, B. K. (2016). Fabrication of EBC System with Oxide Eutectic Structure. In Ceramic Transactions (Vol. 256, pp. 65-72). Wiley-Blackwell. https://doi.org/10.1002/9781119234593.ch7