Fabrication of micro patterned ceramic structure by imprinting process

Yang Xu, Fujio Tsumori, Hyung Goo Kang, Hidesh Miura

Research output: Contribution to journalArticle

17 Citations (Scopus)

Abstract

In this report, an improved fabrication method of micro powder imprinting (μ;PI), which has the industrial value in reducing of the cost and procedures, is introduced to fabricate the thin yttria-stabilized zirconia (YSZ) sheet with the micrometer scale patterns. The Kapton film mold was designed and employed in thermal imprinting in order to prevent the breakage of sheet as mold removing. After imprinting, debinding and sintering procedures, the well pattern consistence line and space patterns in scale of 8μm were obtained on 300μm thick ceramic sheets. The morphology of sintered ceramic patterns was observed and the behaviors of debinding and sintering were investigated in this report. Meanwhile, the imprinting on bilayer ceramic sheet was carried out and the results showed the well wave interface of each layer, which have the potential utilization for solid oxide fuel cell directly.

Original languageEnglish
Pages (from-to)673-678
Number of pages6
JournalFuntai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
Volume58
Issue number11
DOIs
Publication statusPublished - Nov 1 2011

Fingerprint

Sintering
Fabrication
Yttria stabilized zirconia
Solid oxide fuel cells (SOFC)
Powders
Costs
Hot Temperature

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering
  • Metals and Alloys
  • Materials Chemistry

Cite this

Fabrication of micro patterned ceramic structure by imprinting process. / Xu, Yang; Tsumori, Fujio; Kang, Hyung Goo; Miura, Hidesh.

In: Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 58, No. 11, 01.11.2011, p. 673-678.

Research output: Contribution to journalArticle

@article{5d346dd874864c8f8f7b26697c2520d2,
title = "Fabrication of micro patterned ceramic structure by imprinting process",
abstract = "In this report, an improved fabrication method of micro powder imprinting (μ;PI), which has the industrial value in reducing of the cost and procedures, is introduced to fabricate the thin yttria-stabilized zirconia (YSZ) sheet with the micrometer scale patterns. The Kapton film mold was designed and employed in thermal imprinting in order to prevent the breakage of sheet as mold removing. After imprinting, debinding and sintering procedures, the well pattern consistence line and space patterns in scale of 8μm were obtained on 300μm thick ceramic sheets. The morphology of sintered ceramic patterns was observed and the behaviors of debinding and sintering were investigated in this report. Meanwhile, the imprinting on bilayer ceramic sheet was carried out and the results showed the well wave interface of each layer, which have the potential utilization for solid oxide fuel cell directly.",
author = "Yang Xu and Fujio Tsumori and Kang, {Hyung Goo} and Hidesh Miura",
year = "2011",
month = "11",
day = "1",
doi = "10.2497/jjspm.58.673",
language = "English",
volume = "58",
pages = "673--678",
journal = "Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy",
issn = "0532-8799",
publisher = "Japan Society of Powder and Powder Metallurgy",
number = "11",

}

TY - JOUR

T1 - Fabrication of micro patterned ceramic structure by imprinting process

AU - Xu, Yang

AU - Tsumori, Fujio

AU - Kang, Hyung Goo

AU - Miura, Hidesh

PY - 2011/11/1

Y1 - 2011/11/1

N2 - In this report, an improved fabrication method of micro powder imprinting (μ;PI), which has the industrial value in reducing of the cost and procedures, is introduced to fabricate the thin yttria-stabilized zirconia (YSZ) sheet with the micrometer scale patterns. The Kapton film mold was designed and employed in thermal imprinting in order to prevent the breakage of sheet as mold removing. After imprinting, debinding and sintering procedures, the well pattern consistence line and space patterns in scale of 8μm were obtained on 300μm thick ceramic sheets. The morphology of sintered ceramic patterns was observed and the behaviors of debinding and sintering were investigated in this report. Meanwhile, the imprinting on bilayer ceramic sheet was carried out and the results showed the well wave interface of each layer, which have the potential utilization for solid oxide fuel cell directly.

AB - In this report, an improved fabrication method of micro powder imprinting (μ;PI), which has the industrial value in reducing of the cost and procedures, is introduced to fabricate the thin yttria-stabilized zirconia (YSZ) sheet with the micrometer scale patterns. The Kapton film mold was designed and employed in thermal imprinting in order to prevent the breakage of sheet as mold removing. After imprinting, debinding and sintering procedures, the well pattern consistence line and space patterns in scale of 8μm were obtained on 300μm thick ceramic sheets. The morphology of sintered ceramic patterns was observed and the behaviors of debinding and sintering were investigated in this report. Meanwhile, the imprinting on bilayer ceramic sheet was carried out and the results showed the well wave interface of each layer, which have the potential utilization for solid oxide fuel cell directly.

UR - http://www.scopus.com/inward/record.url?scp=84862929102&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84862929102&partnerID=8YFLogxK

U2 - 10.2497/jjspm.58.673

DO - 10.2497/jjspm.58.673

M3 - Article

AN - SCOPUS:84862929102

VL - 58

SP - 673

EP - 678

JO - Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy

JF - Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy

SN - 0532-8799

IS - 11

ER -