Factors influencing the flow and hardness of materials with ultrafine grain sizes

Minoru Furukawa, Zenji Horita, Minoru Nemoto, Ruslan Z. Valiev, Terence G. Langdon

Research output: Contribution to journalArticle

Abstract

Ultrafine grain sizes were introduced into an Al-3wt%Mg solid solution alloy and a commercial Al-Mg-Li-Zr alloy through intense plastic straining by equal-channel angular (ECA) pressing at room temperature and at 673 K respectively. Tensile testing of pressed samples at room temperature revealed markedly different stress-strain curves for these two alloys, with the Al-3wt%Mg alloy exhibiting a high yield stress with little subsequent strain hardening and the Al-Mg-Li-Zr alloy exhibiting a lower yield stress and extensive strain hardening after yielding. These and other experimental results are interpreted in terms of the nature of the microstructure introduced by the ECA pressing procedure. It is concluded that significant variations may occur in the mechanical properties of nominally similar ultrafine-grained materials depending upon the pressing conditions and the extent of any relaxation which may occur during the straining process.

Original languageEnglish
Pages (from-to)203-215
Number of pages13
JournalPhilosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties
Volume78
Issue number1
Publication statusPublished - Jul 1 1998

Fingerprint

hardness
grain size
Hardness
pressing
Equal channel angular pressing
strain hardening
Strain hardening
Yield stress
Tensile testing
room temperature
Stress-strain curves
Solid solutions
solid solutions
plastics
Ultrafine
mechanical properties
Plastics
Mechanical properties
Temperature
microstructure

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Materials Science(all)
  • Condensed Matter Physics
  • Physics and Astronomy (miscellaneous)
  • Metals and Alloys

Cite this

Factors influencing the flow and hardness of materials with ultrafine grain sizes. / Furukawa, Minoru; Horita, Zenji; Nemoto, Minoru; Valiev, Ruslan Z.; Langdon, Terence G.

In: Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties, Vol. 78, No. 1, 01.07.1998, p. 203-215.

Research output: Contribution to journalArticle

Furukawa, Minoru ; Horita, Zenji ; Nemoto, Minoru ; Valiev, Ruslan Z. ; Langdon, Terence G. / Factors influencing the flow and hardness of materials with ultrafine grain sizes. In: Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties. 1998 ; Vol. 78, No. 1. pp. 203-215.
@article{b34540a7b7fc401a8fddc4c9bce9a395,
title = "Factors influencing the flow and hardness of materials with ultrafine grain sizes",
abstract = "Ultrafine grain sizes were introduced into an Al-3wt{\%}Mg solid solution alloy and a commercial Al-Mg-Li-Zr alloy through intense plastic straining by equal-channel angular (ECA) pressing at room temperature and at 673 K respectively. Tensile testing of pressed samples at room temperature revealed markedly different stress-strain curves for these two alloys, with the Al-3wt{\%}Mg alloy exhibiting a high yield stress with little subsequent strain hardening and the Al-Mg-Li-Zr alloy exhibiting a lower yield stress and extensive strain hardening after yielding. These and other experimental results are interpreted in terms of the nature of the microstructure introduced by the ECA pressing procedure. It is concluded that significant variations may occur in the mechanical properties of nominally similar ultrafine-grained materials depending upon the pressing conditions and the extent of any relaxation which may occur during the straining process.",
author = "Minoru Furukawa and Zenji Horita and Minoru Nemoto and Valiev, {Ruslan Z.} and Langdon, {Terence G.}",
year = "1998",
month = "7",
day = "1",
language = "English",
volume = "78",
pages = "203--215",
journal = "Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties",
issn = "0141-8610",
publisher = "Taylor and Francis Ltd.",
number = "1",

}

TY - JOUR

T1 - Factors influencing the flow and hardness of materials with ultrafine grain sizes

AU - Furukawa, Minoru

AU - Horita, Zenji

AU - Nemoto, Minoru

AU - Valiev, Ruslan Z.

AU - Langdon, Terence G.

PY - 1998/7/1

Y1 - 1998/7/1

N2 - Ultrafine grain sizes were introduced into an Al-3wt%Mg solid solution alloy and a commercial Al-Mg-Li-Zr alloy through intense plastic straining by equal-channel angular (ECA) pressing at room temperature and at 673 K respectively. Tensile testing of pressed samples at room temperature revealed markedly different stress-strain curves for these two alloys, with the Al-3wt%Mg alloy exhibiting a high yield stress with little subsequent strain hardening and the Al-Mg-Li-Zr alloy exhibiting a lower yield stress and extensive strain hardening after yielding. These and other experimental results are interpreted in terms of the nature of the microstructure introduced by the ECA pressing procedure. It is concluded that significant variations may occur in the mechanical properties of nominally similar ultrafine-grained materials depending upon the pressing conditions and the extent of any relaxation which may occur during the straining process.

AB - Ultrafine grain sizes were introduced into an Al-3wt%Mg solid solution alloy and a commercial Al-Mg-Li-Zr alloy through intense plastic straining by equal-channel angular (ECA) pressing at room temperature and at 673 K respectively. Tensile testing of pressed samples at room temperature revealed markedly different stress-strain curves for these two alloys, with the Al-3wt%Mg alloy exhibiting a high yield stress with little subsequent strain hardening and the Al-Mg-Li-Zr alloy exhibiting a lower yield stress and extensive strain hardening after yielding. These and other experimental results are interpreted in terms of the nature of the microstructure introduced by the ECA pressing procedure. It is concluded that significant variations may occur in the mechanical properties of nominally similar ultrafine-grained materials depending upon the pressing conditions and the extent of any relaxation which may occur during the straining process.

UR - http://www.scopus.com/inward/record.url?scp=0032129010&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0032129010&partnerID=8YFLogxK

M3 - Article

VL - 78

SP - 203

EP - 215

JO - Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties

JF - Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties

SN - 0141-8610

IS - 1

ER -