Fatigue behaviour of hot worked cast aluminium alloys with different Si contents

M. Kobayashi, H. Hara, H. Toda, D. Sugiyama, N. Kuroda

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)

Abstract

Cast aluminium alloy has sometimes been utilised for various products after applying plasticworking combining with heat treatment. The thermomechanical treatment will bring not onlypositive effects (workhardening and grain refinement) but also negative effects (damage onparticles and increase of porosity) on the mechanical properties in the cast aluminium alloy. In thisstudy, the relation between microstructures and fatigue properties has been investigated in hotforged and heat treated Al-Si-Mg casting alloys with different Si contents. An ex situ observationof fatigue crack propagation showed different crack behaviours depending on the microstructuresarising from the different Si contents. The crack in the α phase propagated quickly incomparison with the crack located in the eutectic and grain boundaries in the Al-3·1Si-0·4Mgalloy. The crack propagation rate was not constant in the Al-7·7Si-0·4Mg alloy due to theagglomerated Si particles in the eutectic region.

Original languageEnglish
Pages (from-to)31-37
Number of pages7
JournalInternational Journal of Cast Metals Research
Volume25
Issue number1
DOIs
Publication statusPublished - Jan 1 2012
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys

Fingerprint Dive into the research topics of 'Fatigue behaviour of hot worked cast aluminium alloys with different Si contents'. Together they form a unique fingerprint.

Cite this