Fatigue crack growth resistance in Ni-base super alloy

K. Morino, N. Kawagoishi, Q. Chen, Y. Matsuyama, Y. Nakamura

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Rotating bending fatigue tests were carried out to investigate the influence of grain size on the resistance to crack growth of Ni-base super alloy, Inconel 718, using the materials with grain sizes of about 20, 50,100 and 200 μ, at room temperature. The larger grain size, the smaller crack growth rate, though the static strength was decreased with increase in grain size. The growth rate of a small crack was uniquely determined by the term σan (Small crack growth law), where σ a and a are the stress amplitude and the crack length, respectively, and n is a constant. The resistance to crack growth among materials was evaluated based on the law and showed a good correlation with tensile strength σB, meaning that fatigue life can be predicted by using only σB.

Original languageEnglish
Pages (from-to)541-544
Number of pages4
JournalKey Engineering Materials
Volume348-349
Publication statusPublished - Aug 1 2007
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Fatigue crack growth resistance in Ni-base super alloy'. Together they form a unique fingerprint.

  • Cite this

    Morino, K., Kawagoishi, N., Chen, Q., Matsuyama, Y., & Nakamura, Y. (2007). Fatigue crack growth resistance in Ni-base super alloy. Key Engineering Materials, 348-349, 541-544.