Feasibility of inkjet printing for field electron emitter fabrication

Akiyoshi Baba, Yuji Ishida, Tomoya Yoshida, Kazunori Hakiai, Kazunari Matsuzaki, Tanemasa Asano

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The suitability of inkjet printing for the fabrication of field electron emitter was investigated. The field electron emission characteristics of the carbon black material, used for the fabrication, patterned by inkjet printing were also discussed. It was found that field emission current was obtained from the patterned carbon black dots with fairly stable emission rate. About 8% current fluctuation was observed for the field electron emission current.

Original languageEnglish
Title of host publicationTechnical Digest of the 17th International Vacuum Nanoelectronics Conference, IVNC 2004
EditorsA.I. Akinwande, L.-Y. Chen, I. Kymissis, C.-Y. Hong
Pages272-273
Number of pages2
Publication statusPublished - Dec 1 2004
EventTechnical Digest of the 17th International Vacuum Nanoelectronics Conference, IVNC 2004 - Cambridge, MA, United States
Duration: Jul 11 2004Jul 16 2004

Publication series

NameTechnical Digest of the 17th International Vacuum Nanoelectronics Conference, IVNC 2004

Other

OtherTechnical Digest of the 17th International Vacuum Nanoelectronics Conference, IVNC 2004
CountryUnited States
CityCambridge, MA
Period7/11/047/16/04

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Baba, A., Ishida, Y., Yoshida, T., Hakiai, K., Matsuzaki, K., & Asano, T. (2004). Feasibility of inkjet printing for field electron emitter fabrication. In A. I. Akinwande, L-Y. Chen, I. Kymissis, & C-Y. Hong (Eds.), Technical Digest of the 17th International Vacuum Nanoelectronics Conference, IVNC 2004 (pp. 272-273). (Technical Digest of the 17th International Vacuum Nanoelectronics Conference, IVNC 2004).