Flexible Gas Sensor Array Based on Matrix of Molecularly Imprinted Materials and Full Printing Process

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

This paper proposes a flexible gas sensor array system fabricated by full printing process, which can simultaneously monitor a variety of gases. The production of sensors using a low-cost, large-scale, high-speed printing technology throughout the process. Realizing the production of multiple sensors in a small area with low cost. Detection of a variety of gases using a sensor array. The results show that it is possible to make a full-printing gas sensor by acetylene carbon black (Φ20 nm) ink and molecularly imprinted polymer (MIP) ink; 36 sensors are formed on a 3cm-3cm paper; and the gases such as acetic acid and hexanoic acid are well recognized.

Original languageEnglish
Title of host publication2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems and Eurosensors XXXIII, TRANSDUCERS 2019 and EUROSENSORS XXXIII
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages765-768
Number of pages4
ISBN (Electronic)9781728120072
DOIs
Publication statusPublished - Jun 2019
Event20th International Conference on Solid-State Sensors, Actuators and Microsystems and Eurosensors XXXIII, TRANSDUCERS 2019 and EUROSENSORS XXXIII - Berlin, Germany
Duration: Jun 23 2019Jun 27 2019

Publication series

Name2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems and Eurosensors XXXIII, TRANSDUCERS 2019 and EUROSENSORS XXXIII

Conference

Conference20th International Conference on Solid-State Sensors, Actuators and Microsystems and Eurosensors XXXIII, TRANSDUCERS 2019 and EUROSENSORS XXXIII
CountryGermany
CityBerlin
Period6/23/196/27/19

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Process Chemistry and Technology
  • Spectroscopy
  • Electrical and Electronic Engineering
  • Mechanical Engineering
  • Electronic, Optical and Magnetic Materials
  • Control and Optimization
  • Instrumentation

Cite this

Ge, L., Sassa, F., & Hayashi, K. (2019). Flexible Gas Sensor Array Based on Matrix of Molecularly Imprinted Materials and Full Printing Process. In 2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems and Eurosensors XXXIII, TRANSDUCERS 2019 and EUROSENSORS XXXIII (pp. 765-768). [8808512] (2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems and Eurosensors XXXIII, TRANSDUCERS 2019 and EUROSENSORS XXXIII). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/TRANSDUCERS.2019.8808512