Formation process of vortex ring generated by a pulsating jet flow

Fujio Akagi, Yuuki Okuzono, Youichi Ando, Sumio Yamaguchi, Masato Furukawa

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

The formation process of a vortex ring generated by a pulsating jet flow, which is called the cyclic vortex ring, is investigated experimentally with PIV measurement. The waveform of the jet flow is conducted using sine curves by changing the amplitude of Reynolds' numbers Re 0 of 1200∼5040 and Womersley numbers a of 12.5∼24.4. The results indicate that the formation process of the cyclic vortex ring is different from the laminar vortex ring Another vortex ring which is formed from separated wall boundary layers in the nozzle during the suction period, which is called the separation vortex ring, is transported toward the nozzle exit during the discharge period. This separation vortex ring interferes with the formation process of the cyclic vortex ring at the nozzle exit plane. The circulation of the separation vortex ring depends on the pulsating conditions of the jet flow. Distribution of the vorticity around the core center of the cyclic vortex ring is in good agreement with the Oseen vortex model. The formation process of the cyclic vortex ring is classified into three categories, depending on Strouhal number.

Original languageEnglish
Pages (from-to)546-556
Number of pages11
JournalNihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B
Volume77
Issue number775
DOIs
Publication statusPublished - Dec 1 2011

Fingerprint

vortex rings
jet flow
Vortex flow
nozzles
Nozzles
Strouhal number
suction
particle image velocimetry
vorticity
Vorticity
boundary layers
Reynolds number
waveforms
Boundary layers
vortices

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Mechanical Engineering

Cite this

Formation process of vortex ring generated by a pulsating jet flow. / Akagi, Fujio; Okuzono, Yuuki; Ando, Youichi; Yamaguchi, Sumio; Furukawa, Masato.

In: Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, Vol. 77, No. 775, 01.12.2011, p. 546-556.

Research output: Contribution to journalArticle

@article{8a57e71a2edf4b6092f3717ba1eca755,
title = "Formation process of vortex ring generated by a pulsating jet flow",
abstract = "The formation process of a vortex ring generated by a pulsating jet flow, which is called the cyclic vortex ring, is investigated experimentally with PIV measurement. The waveform of the jet flow is conducted using sine curves by changing the amplitude of Reynolds' numbers Re 0 of 1200∼5040 and Womersley numbers a of 12.5∼24.4. The results indicate that the formation process of the cyclic vortex ring is different from the laminar vortex ring Another vortex ring which is formed from separated wall boundary layers in the nozzle during the suction period, which is called the separation vortex ring, is transported toward the nozzle exit during the discharge period. This separation vortex ring interferes with the formation process of the cyclic vortex ring at the nozzle exit plane. The circulation of the separation vortex ring depends on the pulsating conditions of the jet flow. Distribution of the vorticity around the core center of the cyclic vortex ring is in good agreement with the Oseen vortex model. The formation process of the cyclic vortex ring is classified into three categories, depending on Strouhal number.",
author = "Fujio Akagi and Yuuki Okuzono and Youichi Ando and Sumio Yamaguchi and Masato Furukawa",
year = "2011",
month = "12",
day = "1",
doi = "10.1299/kikaib.77.546",
language = "English",
volume = "77",
pages = "546--556",
journal = "Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B",
issn = "0387-5016",
publisher = "The Japan Society of Mechanical Engineers",
number = "775",

}

TY - JOUR

T1 - Formation process of vortex ring generated by a pulsating jet flow

AU - Akagi, Fujio

AU - Okuzono, Yuuki

AU - Ando, Youichi

AU - Yamaguchi, Sumio

AU - Furukawa, Masato

PY - 2011/12/1

Y1 - 2011/12/1

N2 - The formation process of a vortex ring generated by a pulsating jet flow, which is called the cyclic vortex ring, is investigated experimentally with PIV measurement. The waveform of the jet flow is conducted using sine curves by changing the amplitude of Reynolds' numbers Re 0 of 1200∼5040 and Womersley numbers a of 12.5∼24.4. The results indicate that the formation process of the cyclic vortex ring is different from the laminar vortex ring Another vortex ring which is formed from separated wall boundary layers in the nozzle during the suction period, which is called the separation vortex ring, is transported toward the nozzle exit during the discharge period. This separation vortex ring interferes with the formation process of the cyclic vortex ring at the nozzle exit plane. The circulation of the separation vortex ring depends on the pulsating conditions of the jet flow. Distribution of the vorticity around the core center of the cyclic vortex ring is in good agreement with the Oseen vortex model. The formation process of the cyclic vortex ring is classified into three categories, depending on Strouhal number.

AB - The formation process of a vortex ring generated by a pulsating jet flow, which is called the cyclic vortex ring, is investigated experimentally with PIV measurement. The waveform of the jet flow is conducted using sine curves by changing the amplitude of Reynolds' numbers Re 0 of 1200∼5040 and Womersley numbers a of 12.5∼24.4. The results indicate that the formation process of the cyclic vortex ring is different from the laminar vortex ring Another vortex ring which is formed from separated wall boundary layers in the nozzle during the suction period, which is called the separation vortex ring, is transported toward the nozzle exit during the discharge period. This separation vortex ring interferes with the formation process of the cyclic vortex ring at the nozzle exit plane. The circulation of the separation vortex ring depends on the pulsating conditions of the jet flow. Distribution of the vorticity around the core center of the cyclic vortex ring is in good agreement with the Oseen vortex model. The formation process of the cyclic vortex ring is classified into three categories, depending on Strouhal number.

UR - http://www.scopus.com/inward/record.url?scp=84859568682&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84859568682&partnerID=8YFLogxK

U2 - 10.1299/kikaib.77.546

DO - 10.1299/kikaib.77.546

M3 - Article

VL - 77

SP - 546

EP - 556

JO - Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B

JF - Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B

SN - 0387-5016

IS - 775

ER -