Abstract
A magnetic bar-code pattern recognition system with a magnetoresistive sensor is proposed. The bar-code consists of a set of grooves on an iron plate, similar to an optical bar-code pattern. When a magnet passes above the grooves on an iron plate, the magnetic field produced by the magnet is bent by the grooves. The barcode pattern of grooves can be reconstructed by detecting the bend using the magnetoresistive sensor. In this paper, computer simulation results of magnetic flux density distribution near the grooves, and prototype recognition systems with a magnetoresistive sensor are described. It is shown that a two-groove bar-code configuration with different groove depths depending on groove width and a thin-film magneto-resistive sensor construction are useful in realizing high resolution detection systems.
Original language | English |
---|---|
Pages (from-to) | 1575-1577 |
Number of pages | 3 |
Journal | IEEE Transactions on Magnetics |
Volume | 26 |
Issue number | 5 |
DOIs | |
Publication status | Published - Sep 1990 |
All Science Journal Classification (ASJC) codes
- Electronic, Optical and Magnetic Materials
- Electrical and Electronic Engineering