Growth mechanism of YBCO films in metal organic deposition method using trifluoroacetates

Tetsuji Honjo, Yuichi Nakamura, Ryo Teranishi, Hiroshi Fuji, Junko Shibata, Teruo Izumi, Yuh Shiohara

Research output: Contribution to journalConference article

50 Citations (Scopus)

Abstract

We report the theoretical analysis of YBCO growth during post annealing in the TFA-MOD process considering both the diffusion in the boundary layer and the growth kinetics at the precursor/YBCO interface. As a result, we could obtain the analytical solution of the growth rate of YBCO. Subsequently, the unknown parameters in this solution were evaluated by the experimental measurements of the growth rate. The experimental results of the growth rate showed that it was independent of the film thickness and proportional to the square root of the water vapor pressure. These results suggested that the mass transfer in the gas boundary layer limited the growth rate. This model reveals a basic idea of the mechanism to determine the steady state growth rate, and could explain the experimental results. In addition, it predicts that the growth rate can be estimated from the water vapor pressure of the inlet gas. Consequently, it was confirmed that this growth model is effective for understanding of the growth kinetics in the TFA-MOD process.

Original languageEnglish
Pages (from-to)2516-2519
Number of pages4
JournalIEEE Transactions on Applied Superconductivity
Volume13
Issue number2 III
DOIs
Publication statusPublished - Jun 1 2003
Externally publishedYes
Event2002 Applied Superconductivity Conference - Houston, TX, United States
Duration: Aug 4 2002Aug 9 2002

Fingerprint

Trifluoroacetic Acid
Metals
metals
Growth kinetics
Steam
Vapor pressure
Water vapor
Boundary layers
Gases
water pressure
vapor pressure
water vapor
boundary layers
Film thickness
Mass transfer
Annealing
kinetics
gases
mass transfer
film thickness

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

Cite this

Growth mechanism of YBCO films in metal organic deposition method using trifluoroacetates. / Honjo, Tetsuji; Nakamura, Yuichi; Teranishi, Ryo; Fuji, Hiroshi; Shibata, Junko; Izumi, Teruo; Shiohara, Yuh.

In: IEEE Transactions on Applied Superconductivity, Vol. 13, No. 2 III, 01.06.2003, p. 2516-2519.

Research output: Contribution to journalConference article

Honjo, Tetsuji ; Nakamura, Yuichi ; Teranishi, Ryo ; Fuji, Hiroshi ; Shibata, Junko ; Izumi, Teruo ; Shiohara, Yuh. / Growth mechanism of YBCO films in metal organic deposition method using trifluoroacetates. In: IEEE Transactions on Applied Superconductivity. 2003 ; Vol. 13, No. 2 III. pp. 2516-2519.
@article{88af16022c844117ac6152cbeca3afe6,
title = "Growth mechanism of YBCO films in metal organic deposition method using trifluoroacetates",
abstract = "We report the theoretical analysis of YBCO growth during post annealing in the TFA-MOD process considering both the diffusion in the boundary layer and the growth kinetics at the precursor/YBCO interface. As a result, we could obtain the analytical solution of the growth rate of YBCO. Subsequently, the unknown parameters in this solution were evaluated by the experimental measurements of the growth rate. The experimental results of the growth rate showed that it was independent of the film thickness and proportional to the square root of the water vapor pressure. These results suggested that the mass transfer in the gas boundary layer limited the growth rate. This model reveals a basic idea of the mechanism to determine the steady state growth rate, and could explain the experimental results. In addition, it predicts that the growth rate can be estimated from the water vapor pressure of the inlet gas. Consequently, it was confirmed that this growth model is effective for understanding of the growth kinetics in the TFA-MOD process.",
author = "Tetsuji Honjo and Yuichi Nakamura and Ryo Teranishi and Hiroshi Fuji and Junko Shibata and Teruo Izumi and Yuh Shiohara",
year = "2003",
month = "6",
day = "1",
doi = "10.1109/TASC.2003.811836",
language = "English",
volume = "13",
pages = "2516--2519",
journal = "IEEE Transactions on Applied Superconductivity",
issn = "1051-8223",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "2 III",

}

TY - JOUR

T1 - Growth mechanism of YBCO films in metal organic deposition method using trifluoroacetates

AU - Honjo, Tetsuji

AU - Nakamura, Yuichi

AU - Teranishi, Ryo

AU - Fuji, Hiroshi

AU - Shibata, Junko

AU - Izumi, Teruo

AU - Shiohara, Yuh

PY - 2003/6/1

Y1 - 2003/6/1

N2 - We report the theoretical analysis of YBCO growth during post annealing in the TFA-MOD process considering both the diffusion in the boundary layer and the growth kinetics at the precursor/YBCO interface. As a result, we could obtain the analytical solution of the growth rate of YBCO. Subsequently, the unknown parameters in this solution were evaluated by the experimental measurements of the growth rate. The experimental results of the growth rate showed that it was independent of the film thickness and proportional to the square root of the water vapor pressure. These results suggested that the mass transfer in the gas boundary layer limited the growth rate. This model reveals a basic idea of the mechanism to determine the steady state growth rate, and could explain the experimental results. In addition, it predicts that the growth rate can be estimated from the water vapor pressure of the inlet gas. Consequently, it was confirmed that this growth model is effective for understanding of the growth kinetics in the TFA-MOD process.

AB - We report the theoretical analysis of YBCO growth during post annealing in the TFA-MOD process considering both the diffusion in the boundary layer and the growth kinetics at the precursor/YBCO interface. As a result, we could obtain the analytical solution of the growth rate of YBCO. Subsequently, the unknown parameters in this solution were evaluated by the experimental measurements of the growth rate. The experimental results of the growth rate showed that it was independent of the film thickness and proportional to the square root of the water vapor pressure. These results suggested that the mass transfer in the gas boundary layer limited the growth rate. This model reveals a basic idea of the mechanism to determine the steady state growth rate, and could explain the experimental results. In addition, it predicts that the growth rate can be estimated from the water vapor pressure of the inlet gas. Consequently, it was confirmed that this growth model is effective for understanding of the growth kinetics in the TFA-MOD process.

UR - http://www.scopus.com/inward/record.url?scp=0042967810&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0042967810&partnerID=8YFLogxK

U2 - 10.1109/TASC.2003.811836

DO - 10.1109/TASC.2003.811836

M3 - Conference article

VL - 13

SP - 2516

EP - 2519

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

SN - 1051-8223

IS - 2 III

ER -