無線シングルキャリア位相変調信号に適した1bit A/D変換器の構成と性能評価 (通信方式)

Translated title of the contribution: Hardware Configuration and Evaluation of 1 Bit A/D Converter for Wireless Single Carrier Phase Modulation Signals

兼本 大輔, 牟田 修, 古川 浩, 金谷 晴一, 吉田 啓二

Research output: Contribution to journalArticle

Abstract

In this paper, hardware configuration and evaluation of a l bit A/D converter for wireless single carrier phase modulation signals were discussed. Circuit area and power consumption of the 1bit A/D converter are small. Therefore, in receiver system for wireless single carrier phase modulation signals, realizing small analog circuit area and low power consumption can be expected if the 1bit A/D converter is utilized in order to detect signal phase. In this paper, the 1bit A/D converter is implemented on a 0.18μm. CMOS process. We evaluated the system by using actual wireless single carrier phase modulation signals. Finally, BER (Bit Error Rate)characteristics were measured.
Translated title of the contributionHardware Configuration and Evaluation of 1 Bit A/D Converter for Wireless Single Carrier Phase Modulation Signals
Original languageJapanese
Pages (from-to)223-227
Number of pages5
JournalIEICE technical report
Volume112
Issue number486
Publication statusPublished - Mar 14 2013

Fingerprint Dive into the research topics of 'Hardware Configuration and Evaluation of 1 Bit A/D Converter for Wireless Single Carrier Phase Modulation Signals'. Together they form a unique fingerprint.

  • Cite this