High oxygen permeation in Ba0.95La0.05FeO 3-δ membranes with surface modification

Tetsuya Kida, Subaru Ninomiya, Ken Watanabe, Noboru Yamazoe, Kengo Shimanoe

Research output: Contribution to journalArticle

29 Citations (Scopus)

Abstract

Selective oxygen separation from air was carried out using ceramic membranes composed of Ba0.95La0.05FeO3-δ. We demonstrated that surface abrasion of Ba0.95La 0.05FeO3-δ membranes led to a significant increase in oxygen permeation fluxes at 700-930 °C because of an increase in surface reaction sites. Abrasion of the oxygen desorption side of the membrane resulted in a higher oxygen permeability than with abrasion on the oxygen sorption side. Moreover, an increase in the area of the oxygen desorption side also increased the oxygen permeability. The results suggest that oxygen permeation through Ba0.95La0.05FeO3-δ membranes is limited by the desorption of oxygen (surface reaction) and bulk diffusion. Attachment of a porous layer made of Ba0.95La0.05FeO 3-δ to the membrane surface was also effective in increasing oxygen permeability. For example, a high permeation flux of 3.2 cm3 min-1 cm-2 was achieved at 930 °C under a He/air gradient for a membrane (0.5 mm thickness) coated with a porous layer (14.4 μm).

Original languageEnglish
Pages (from-to)2849-2853
Number of pages5
JournalACS Applied Materials and Interfaces
Volume2
Issue number10
DOIs
Publication statusPublished - Oct 27 2010

All Science Journal Classification (ASJC) codes

  • Materials Science(all)

Fingerprint Dive into the research topics of 'High oxygen permeation in Ba<sub>0.95</sub>La<sub>0.05</sub>FeO <sub>3-δ</sub> membranes with surface modification'. Together they form a unique fingerprint.

  • Cite this