Hot corrosion behavior of plasma sprayed 4 mol% Y2O 3-ZrO2 thermal barrier coatings with volcanic Ash

Won Jun Lee, Byungkoog Jang, Dae Soon Lim, Yoon Suk Oh, Seong Won Kim, Hyung Tae Kim, Hiroshi Araki, Hideyuki Murakami, Seiji Kuroda

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

The hot corrosion behavior of plasma sprayed 4 mol% Y2O 3-ZrO2 (YSZ) thermal barrier coatings (TBCs) with volcanic ash is investigated. Volcanic ash that deposited on the TBCs in gas-turbine engines can attack the surface of TBCs itself as a form of corrosive melt. YSZ coating specimens with a thickness of 430-440 μm are prepared using a plasma spray method. These specimens are subjected to hot corrosion environment at 1200°C with five different duration time, from 10 mins to 100 h in the presence of corrosive melt from volcanic ash. The microstructure, composition, and phase analysis are performed using Field emission scanning electron microscopy, including Energy dispersive spectroscopy and X-ray diffraction. After the heat treatment, hematite (Fe2O3-TiO2) and monoclinic YSZ phases are found in TBCs. Furthermore the interface area between the molten volcanic ash layers and YSZ coatings becomes porous with increases in the heat treatment time as the YSZ coatings dissolved into molten volcanic ash. The maximum thickness of this a porous reaction zone is 25 μm after 100 h of heat treatment.

Original languageEnglish
Pages (from-to)353-358
Number of pages6
JournalJournal of the Korean Ceramic Society
Volume50
Issue number6
DOIs
Publication statusPublished - Nov 30 2013
Externally publishedYes

Fingerprint

Ashes
Volcanic Eruptions
Thermal barrier coatings
Corrosion
Plasmas
Caustics
Heat treatment
Coatings
Molten materials
Hematite
Field emission
Gas turbines
Energy dispersive spectroscopy
Turbines
X ray diffraction
Microstructure
Scanning electron microscopy

All Science Journal Classification (ASJC) codes

  • Ceramics and Composites

Cite this

Hot corrosion behavior of plasma sprayed 4 mol% Y2O 3-ZrO2 thermal barrier coatings with volcanic Ash. / Lee, Won Jun; Jang, Byungkoog; Lim, Dae Soon; Oh, Yoon Suk; Kim, Seong Won; Kim, Hyung Tae; Araki, Hiroshi; Murakami, Hideyuki; Kuroda, Seiji.

In: Journal of the Korean Ceramic Society, Vol. 50, No. 6, 30.11.2013, p. 353-358.

Research output: Contribution to journalArticle

Lee, Won Jun ; Jang, Byungkoog ; Lim, Dae Soon ; Oh, Yoon Suk ; Kim, Seong Won ; Kim, Hyung Tae ; Araki, Hiroshi ; Murakami, Hideyuki ; Kuroda, Seiji. / Hot corrosion behavior of plasma sprayed 4 mol% Y2O 3-ZrO2 thermal barrier coatings with volcanic Ash. In: Journal of the Korean Ceramic Society. 2013 ; Vol. 50, No. 6. pp. 353-358.
@article{c8446827393c49238d3b10126caf4e26,
title = "Hot corrosion behavior of plasma sprayed 4 mol{\%} Y2O 3-ZrO2 thermal barrier coatings with volcanic Ash",
abstract = "The hot corrosion behavior of plasma sprayed 4 mol{\%} Y2O 3-ZrO2 (YSZ) thermal barrier coatings (TBCs) with volcanic ash is investigated. Volcanic ash that deposited on the TBCs in gas-turbine engines can attack the surface of TBCs itself as a form of corrosive melt. YSZ coating specimens with a thickness of 430-440 μm are prepared using a plasma spray method. These specimens are subjected to hot corrosion environment at 1200°C with five different duration time, from 10 mins to 100 h in the presence of corrosive melt from volcanic ash. The microstructure, composition, and phase analysis are performed using Field emission scanning electron microscopy, including Energy dispersive spectroscopy and X-ray diffraction. After the heat treatment, hematite (Fe2O3-TiO2) and monoclinic YSZ phases are found in TBCs. Furthermore the interface area between the molten volcanic ash layers and YSZ coatings becomes porous with increases in the heat treatment time as the YSZ coatings dissolved into molten volcanic ash. The maximum thickness of this a porous reaction zone is 25 μm after 100 h of heat treatment.",
author = "Lee, {Won Jun} and Byungkoog Jang and Lim, {Dae Soon} and Oh, {Yoon Suk} and Kim, {Seong Won} and Kim, {Hyung Tae} and Hiroshi Araki and Hideyuki Murakami and Seiji Kuroda",
year = "2013",
month = "11",
day = "30",
doi = "10.4191/kcers.2013.50.6.353",
language = "English",
volume = "50",
pages = "353--358",
journal = "Journal of the Korean Ceramic Society",
issn = "1229-7801",
publisher = "Korean Ceramic Society",
number = "6",

}

TY - JOUR

T1 - Hot corrosion behavior of plasma sprayed 4 mol% Y2O 3-ZrO2 thermal barrier coatings with volcanic Ash

AU - Lee, Won Jun

AU - Jang, Byungkoog

AU - Lim, Dae Soon

AU - Oh, Yoon Suk

AU - Kim, Seong Won

AU - Kim, Hyung Tae

AU - Araki, Hiroshi

AU - Murakami, Hideyuki

AU - Kuroda, Seiji

PY - 2013/11/30

Y1 - 2013/11/30

N2 - The hot corrosion behavior of plasma sprayed 4 mol% Y2O 3-ZrO2 (YSZ) thermal barrier coatings (TBCs) with volcanic ash is investigated. Volcanic ash that deposited on the TBCs in gas-turbine engines can attack the surface of TBCs itself as a form of corrosive melt. YSZ coating specimens with a thickness of 430-440 μm are prepared using a plasma spray method. These specimens are subjected to hot corrosion environment at 1200°C with five different duration time, from 10 mins to 100 h in the presence of corrosive melt from volcanic ash. The microstructure, composition, and phase analysis are performed using Field emission scanning electron microscopy, including Energy dispersive spectroscopy and X-ray diffraction. After the heat treatment, hematite (Fe2O3-TiO2) and monoclinic YSZ phases are found in TBCs. Furthermore the interface area between the molten volcanic ash layers and YSZ coatings becomes porous with increases in the heat treatment time as the YSZ coatings dissolved into molten volcanic ash. The maximum thickness of this a porous reaction zone is 25 μm after 100 h of heat treatment.

AB - The hot corrosion behavior of plasma sprayed 4 mol% Y2O 3-ZrO2 (YSZ) thermal barrier coatings (TBCs) with volcanic ash is investigated. Volcanic ash that deposited on the TBCs in gas-turbine engines can attack the surface of TBCs itself as a form of corrosive melt. YSZ coating specimens with a thickness of 430-440 μm are prepared using a plasma spray method. These specimens are subjected to hot corrosion environment at 1200°C with five different duration time, from 10 mins to 100 h in the presence of corrosive melt from volcanic ash. The microstructure, composition, and phase analysis are performed using Field emission scanning electron microscopy, including Energy dispersive spectroscopy and X-ray diffraction. After the heat treatment, hematite (Fe2O3-TiO2) and monoclinic YSZ phases are found in TBCs. Furthermore the interface area between the molten volcanic ash layers and YSZ coatings becomes porous with increases in the heat treatment time as the YSZ coatings dissolved into molten volcanic ash. The maximum thickness of this a porous reaction zone is 25 μm after 100 h of heat treatment.

UR - http://www.scopus.com/inward/record.url?scp=84893715187&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84893715187&partnerID=8YFLogxK

U2 - 10.4191/kcers.2013.50.6.353

DO - 10.4191/kcers.2013.50.6.353

M3 - Article

AN - SCOPUS:84893715187

VL - 50

SP - 353

EP - 358

JO - Journal of the Korean Ceramic Society

JF - Journal of the Korean Ceramic Society

SN - 1229-7801

IS - 6

ER -